aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb/frontends/zl10353.h
AgeCommit message (Collapse)Author
2008-04-24V4L/DVB (7514): media/dvb/frontends replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6656): zl10353: store frequencies in 0.1kHz to eliminate rounding ↵Chris Pascoe
errors Whilst reanalysing my formulas I realised it was no longer possible to get the right values for a 36.1667MHz IF due to rounding problems. Storing frequencies in units of 0.1kHz makes it possible to calculate these again correctly. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6630): zl10353: calculate input frequency register instead of using ↵Chris Pascoe
hardcoded value Now we know the zl10353's correct ADC clock, we can calculate the input frequency registers correctly instead of just blindly setting them. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6629): zl10353: fix default adc_clock and TRL nominal rate calculationChris Pascoe
The default adc_clock for the zl10353 is different from what was originally thought to be the case and the TRL nominal rate formula was incorrect as a result. Use a better (and hopefully now correct) formula. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5217): Zl10353: Implement TRL nominal rate calculationAntti Palosaari
Implement trl nominal rate calculation to Zarlink ZL10353 demod, based on calculation used in Zarlink MT352. This adds support for 6 and 8MHz bandwidth transponders. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-03V4L/DVB (4751): Fix DBV_FE_CUSTOMISE for card drivers compiled into kernelTrent Piepho
When a front-end is disabled, card drivers that use it are compiled with a stub version of the front-end's attach function. This way they have no references to the front-end's code and don't need it to be loaded. If a card driver is compiled into the kernel, and a front-end is a module, then that front-end is effectively disabled wrt the card driver. In this case, the card driver should get the stub version. This was not happening. The stub vs real attach function selection is changed so that when the front-end is a module the real attach function is only used if the card driver is a module as well. This means a module front-end will be supported by card drivers that are modules and not supported by card drivers compiled into the kernel. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4495): Fix "no data from ZL10353 based USB tuner" problemChris Pascoe
Force parallel transport stream output on the ZL10353 attached to a bluebird device. Addresses the problem where a frontend lock was observed, but no MPEG transport data was received. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4387): Add Kconfig infrastructure for dvb_attachAndrew de Quincey
Allow it to be en/disabled Disable it in < 2.6.17 due to symbol_xxx() bug Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4384): Remove remaining static function callsAndrew de Quincey
Rewrote _write() calls to use write() op. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3890): Add support for non-attached tuners to zl10353Andrew de Quincey
Add no_tuner setting like in mt352. Update to use correct tuner API calls. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3868): Convert zl10353 to refactored tuner codeAndrew de Quincey
Convert to tuner_ops calls. Remove pll function pointers from structure. Use standardised pllbuf call. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-08V4L/DVB (3408): DViCO FusionHDTV DVB-T Hybrid and ZL10353-based FusionHDTV ↵Chris Pascoe
DVB-T Plus support Add support for the FE6600 tuner used on the DVB-T Hybrid board. Add support for the Zarlink ZL10353 DVB-T demodulator, which supersedes the MT352, used on the DViCO FusionHDTV DVB-T Hybrid and later model Plus boards. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>