aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb/frontends
AgeCommit message (Collapse)Author
2007-02-21V4L/DVB (5240): Qt1010: use i2c_gate_ctrl where appropriateAntti Palosaari
This patch adds calls to i2c_gate_ctrl in the qt1010 dvb tuner module, while removing the temporary hack in au6610 and gl861. Tested successfully against fi-Oulu frequencies with MSI Megasky 580 GL861 and Sigmatek DVB-110 AU6610. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5218): Zl10353: register definitions updateChris Pascoe
Update the descriptions of "discovered" registers on the zl10353, using the equivalaent mt352 register names. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5217): Zl10353: Implement TRL nominal rate calculationAntti Palosaari
Implement trl nominal rate calculation to Zarlink ZL10353 demod, based on calculation used in Zarlink MT352. This adds support for 6 and 8MHz bandwidth transponders. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5216): Zl10353: add i2c_gate_ctrl supportAntti Palosaari
Implement I2C gate control for Megasky GL861 and SigmaTek AU6610 support. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5215): Experimental support for signal strength/BER/uncorrectable countChris Pascoe
After studying many hours worth of register dumps of MT352 and ZL10353 fed with identically damaged RF signals I have made an educated guess at which registers contain the AGC level, bit error rate and uncorrectable error count values. Implement the IOCTLs that return these values to userspace. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5202): DVB: Use ARRAY_SIZE macro when appropriateAhmed S. Darwish
Use ARRAY_SIZE macro already defined in kernel.h Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5195): Frontends: make 4 functions staticAdrian Bunk
This patch makes four needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5137): Dvb: add new qt1010 tuner moduleAntti Palosaari
QT1010: - old qt1010-code totally rewritten and put in own kernel module - same enhancements as my earlier QT1010 125kHz patch - tuner initialization - register 1f calculation - register 20 calculation - register 25 calculation m920x: (MSI Megasky) - use new QT1010 module instead of old code Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5135): Qt1010: correct hardlockup when an app access the DVB dongleJan Nijs
This patch changes qt1010.h to use dvb_usb_device struct instead of a dvb_usb_adapter for accessing the private area of the driver. Without this patch my PC hard locks when an application tries to access the DVB tuner. Signed-off-by: Jan Nijs <jan.nijs@scarlet.be> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5133): M920x: move qt1010_tuner_attach function into qt1010.hMichael Krufky
The megasky_tuner_attach function is not specific to this device. This patch renames it to qt1010_tuner_attach and moves it into the qt1010 header file. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5130): M920x: misc updates and fixesAapo Tahkola
- hardware pid filtering no longer enabled unless in usb 1.x mode - more responsive rc handling - some minor bug fixes and code refolding - m9206_write delay dropped (doesn't seem to be needed) Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5129): M920x: break out qt1010 tuner code into a separate fileMichael Krufky
qt1010 is a tuner used in some other devices, so this code should be put into a separate file so that it could be reused by other drivers. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (4998): [PATCH] DIB3000MC and NOVA T USB2 #2Mario Rossi
Second part of the patch to make the autosearch work again with DiB3000P/MC. Signed-off-by: Mario Rossi <mariofutire@googlemail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-17Fix typos concerning hierarchyUwe Kleine-König
heirarchical, hierachical -> hierarchical heirarchy, hierachy -> hierarchy Signed-off-by: Uwe Kleine-König <zeisberg@informatik.uni-freiburg.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-27V4L/DVB (4955): Fix autosearch indexMario Rossi
After rewriting the driver the wrong autosearch index was used when COFDM-parameter needed to be detected. Thanks to Mario Rossi who found it. Signed-off-by: Mario Rossi <mariofutire@googlemail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4940): Or51211: Changed SNR and signal strength calculationsRusty Scott
Removes embedded log functions and makes use of the DVB math functions to provide SNR in dB. The changes are modeled after recent changes made to the LGDT330x frontends in lgdt330x.c Signed-off-by: Rusty Scott <rustys@ieee.org> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4939): Or51132: Changed SNR and signal strength reportingRusty Scott
Removes embedded log functions and makes use of the DVB math functions to provide SNR in dB. The changes are modeled after recent changes made to the LGDT330x frontends in lgdt330x.c Signed-off-by: Rusty Scott <rustys@ieee.org> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4891): Lgdt330x: fix broken whitespaceMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4890): Lgdt330x: fix signal / lock status detection bugMichael Krufky
In some cases when using VSB, the AGC status register has been known to falsely report "no signal" when in fact there is a carrier lock. The datasheet labels these status flags as QAM only, yet the lgdt330x module is using these flags for both QAM and VSB. This patch allows for the carrier recovery lock status register to be tested, even if the agc signal status register falsely reports no signal. Thanks to jcrews from #linuxtv in irc, for initially reporting this bug. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4869): Lgh06xf: use return value of dvb_pll_configure()Michael Krufky
Use return value of dvb_pll_configure() to fill priv->frequency In lgh06xf_set_params: Rename int variable "err" to "result". Remove needless calculation of the set frequency, since this value is now being returned by dvb_pll_configure(). Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4868): Dvb-pll: return frequency set by dvb_pll_configure()Michael Krufky
This patch removes some duplicated code by returning the frequency set by dvb_pll_configure(), instead of recalculating it again in dvb_pll_set_params() and dvb_pll_calc_regs(). If the return value of dvb_pll_configure is less than zero, it is an error code. Otherwise, the return value is the frequency actually set by the function. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4867): Whitespace cleanupMichael Krufky
- adhere to 80-column limit - replace some spaces with tabs Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4864): TDA826x I2C read with 2 messagesPatrick Boettcher
Added a dump I2C message to the TDA826x-driver to fix I2C read for identification with ttusb2-driver. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4850): Lgh06xf: fix compiler error when not selectedMichael Krufky
fix build error: lgh06xf.h:29: error: syntax error before '{' token Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4847): Drivers/media/dvb/frontends: kfree() cleanupsMichael Krufky
We don't have to check for NULL before kfree() Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4846): Create new lgh06xf atsc tuner moduleMichael Krufky
This patch creates a new atsc tuner module for the LG TDVS-H06xF ATSC tuners, called lgh06xf. The purpose of this change is to reduce some duplicated code, and to allow the lgh06xf tuner code to take advantage of dvb_attach(). As a side effect, the dependency of dvb-bt8xx on dvb-pll has been removed, since the lgh06xf module itself will use dvb-pll, while remaining optional for the dvb-bt8xx driver through the use of DVB_FE_CUSTOMISE Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4835): Added support for the Terratec Cinergy HT PCMCIA moduleHartmut Hackmann
This is a hybrid cardbus module. Besides the card support, i modified the definition names for AGC and GPIO of the tda10046. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4794): Dvb: dibx000_common-fixAndrew Morton
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4789): Lgdt330x: SNR and signal strength reportingTrent Piepho
Update the SNR calculations to use the new dvb_math log function, and add SNR calculations for all supported modulations for both lg dt3302 and dt3303. The QAM equations don't appear in the dt3302 datasheet, so the ones from the dt3303 datasheet were used. SNR returned is the actual value in dB as 8.8 fixed point. Reporting of real signal strength isn't supported, so rather than return 0, which confuses some software and users, a re-scaled SNR value is returned. Code originally by Rusty Scott. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Rusty Scott <rustys@ieee.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4788): Tda8083: support for uncorrectable blocks and bit error rateChristoph Haubrich
Copied routines for uc blocks and BER from the removed tda80xx.c into tda8083.c. Signed-off-by: Christoph Haubrich <christoph1.haubrich@arcor.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4773): Misc fixes for DiB3000 and DiB7000Patrick Boettcher
This patch contains several fixes for the autosearch algorithm and other small ones. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4772): Add support for DiBcom DiB7000PCPatrick Boettcher
This patch contains support for the DiB7000PC-driver. Signed-off-by: Francois KANOUNNIKOFF <fkanounnikoff@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4766): Add working dib7000m-modulePatrick Boettcher
First working version of the dib7000m-driver. This commit also makes the Hauppauge NOVA-T Stick working. Signed-off-by: Francois Kanounnikoff <fkanounnikoff@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4524): Initial commit for the DiB7000M-demodPatrick Boettcher
Initial commit for the driver for the DiB7000M COFDM demodulator. Signed-off-by: Francois KANOUNNIKOFF <fkanounnikoff@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-07[PATCH] make 1-bit bitfields unsignedMariusz Kozlowski
Keeps sparse happy. Signed-of-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-26V4L/DVB (4874): Fix oops on symbol rate==0Andrew de Quincey
The tda10086 causes an oops (divide by zero) if a zero symbol rate is used; this prevents this. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-13V4L/DVB (4795): Tda826x: use correct max frequencyAlexey Dobriyan
sparse "defined twice" warning Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-03V4L/DVB (4751): Fix DBV_FE_CUSTOMISE for card drivers compiled into kernelTrent Piepho
When a front-end is disabled, card drivers that use it are compiled with a stub version of the front-end's attach function. This way they have no references to the front-end's code and don't need it to be loaded. If a card driver is compiled into the kernel, and a front-end is a module, then that front-end is effectively disabled wrt the card driver. In this case, the card driver should get the stub version. This was not happening. The stub vs real attach function selection is changed so that when the front-end is a module the real attach function is only used if the card driver is a module as well. This means a module front-end will be supported by card drivers that are modules and not supported by card drivers compiled into the kernel. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-02V4L/DVB (4752): DVB: Add DVB_FE_CUSTOMISE support for MT2060Trent Piepho
Let the MT2060 be customized like most of the other DVB PLLs/front-ends. Also, add a missing dependency on I2C. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4750): AGC command1/2 is board specificPatrick Boettcher
Added config-struct-parameter to take board-specific AGC command 1 and 2 into account. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4734): Tda826x: fix frontend selection for dvb_attachMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4733): Tda10086: fix frontend selection for dvb_attachMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4699): CX24109 patch to eliminate the weird mis-tuningsSteven Toth
A number of people have been reporting wierd tuning problems with various cards. Yeasah tracked down the problem to a miss-read datasheet. This resolves the problems. Signed-off-by: Yeasah Pell <yeasah@schwide.net> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4653): Misc fixes for Nova-T 500Patrick Boettcher
- forward the clock to the slave undivided - when sleeping the 3000 do not shutdown the clock Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4652): Misc fixes for DiB3000MC and Nova-T 500Patrick Boettcher
- make the timing frequency update work. - fix AGC calibration for Nova-T 500 Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4648): Hauppauge Nova-T 500 support addedPatrick Boettcher
This changeset finalizes the support of the Hauppauge Nova-T 500 (Dual DVB-T). It adds correct AGC setting for the 3000P, correct firmware download state detection. Additionally it fixes the mt2060-driver to be able to be used with dvb_attach. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4646): Misc. changes, DiB3000MC, MT2060Patrick Boettcher
Changed the attach-function of the dib3000mc-driver to return only one frontend. In case of multiple dib3000-chips on one board, one has to call the i2c-enumeration manually before. Added a field to Microtune 2060 config to output the clock to other tuners/device on a board. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4610): Add tua6100 config wrapperAndrew de Quincey
I had forgotten to add the wrapper round the tua6100_attach function if its disabled in Kconfig Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4606): Add driver for TUA6100Andrew de Quincey
This driver was originally in budget-av.c, however I have extracted it into a seperate file to permit reuse. I also reworked the code to make it maintainable. I then examined the KNC1 windows drivers and rewrote the code in order to configure the PLL as they do. This solves a lot of reported tuning problems. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4600): Fix DVB Front-End Signal Strength InconsistencyBradley Kite
The cx22702 returns an 8 bit unshifted value for signal strength; this is inconsistent with most other frontends Signed-off-by: Bradley Derek Kite <bradley.kite@gmail.com> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>