aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb/ttpci
AgeCommit message (Collapse)Author
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-10V4L/DVB (4921): Budget-av, budget-ci: Fix MC1 register programmingHartmut Birr
Remove bogus read during MC1 programming. A '1' bit could never be cleared using the old code. Use MASK_xx macros. Signed-off-by: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4919): Budget-ci: Use SAA7146_IER_ENABLE/DISABLE to enable or ↵Hartmut Birr
disable a hardware interrupt Use SAA7146_IER_ENABLE/DISABLE to enable or disable a hardware interrupt. Signed-off-by: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4918): Budget-av: Add delay for frontend power-onHartmut Birr
Added a delay to give the frontend a little bit time for power-on. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4916): Av7110,budget,budget-ci,budget-av: Use interrupt mode for ↵Oliver Endriss
I2C transfers Use interrupt mode for I2C transfers. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB: Dvb-budget ci fixAndrew Morton
drivers/media/dvb/ttpci/budget-ci.c:220:6: warning: "LINUX_VERSION_CODE" is not defined drivers/media/dvb/ttpci/budget-ci.c:220:28: warning: "KERNEL_VERSION" is not defined drivers/media/dvb/ttpci/budget-ci.c:220:42: error: missing binary operator before token "(" Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4884): Remove stray IR code left from patchsetAndrew de Quincey
This caused compilation to fail - completely replaced by new style functions, so can be removed. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4883): Fix TD1316 tuner for DVBCThomas Kaiser
If your device is using the philips tda1316 tuner, i think there is a problem in setting the correct Band. 162 MHz and above should be band 2 (Mid-Band). But in dvbc_philips_tdm1316l_tuner_set_params band 1 is set for frequencies below 200 MHz. Signed-off-by: Thomas Kaiser <linux-dvb@kaiser-linux.li> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4882): budget-ci IR: make debounce logic conditionalDavid Hardeman
Change the debounce logic so that it is not used at all unless the debounce parameter has been set. This makes for a much "snappier" remote for most users as there is no timeout to wait for (the debounce logic has a 350ms timer for the next repeat, but with the RC5 protocol, one event per ~110ms is possible) Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4881): budget-ci IR: add IR debugging informationDavid Hardeman
This adds a ir_debug parameter which is useful in tracking down IR decoding problems. Based on Darren Salt's dvb-ir patchset. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4880): budget-ci IR: decode rc5 device byteDavid Hardeman
Decode the RC5 device byte as well as the command byte. Introduce a parameter to set the device events to listen for. Default to try to auto-detect the proper device code, otherwise, listen to any device as the old code did. Based on Darren Salt's dvb-ir patchset. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4879): budget-ci IR: integrate with ir-commonDavid Hardeman
This converts the budget-ci driver so that it uses ir-common for some of its IR processing. In particular, the keymap for the Nova-T (sub 13c2:1011) is switched to the Hauppauge grey/black keymap, of which the keys on the supplied R808 remote control form a subset. The old budget-ci keymap is moved to ir-keymaps.c and is used for other remotes. The debounce logic for buggy remotes (i.e. Zenith) is made conditional the new debounce parameter and defaults to off (so that repeat keypresses aren't ignored for all working remotes). Some parts are based on Darren Salt's dvb-ir patchset. Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4878): budget-ci IR: be more verbose in case of init failureDavid Hardeman
Trivial change to help the user understand what went wrong. Taken from Darren Salt's dvb-ir patchset. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4877): budget-ci IR: improve error checking in init and deinit ↵David Hardeman
functions Improve the error checking in the IR init and deinit functions. Based on Darren Salt's dvb-ir patchset. Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4876): budget-ci IR: support EVIOCGPHYSDavid Hardeman
This patch adds a 'phys' string, of the same form as used by various other DVB cards' IR drivers, for access by any program which uses the EVIOCPHYS ioctl or may read /sys/class/input/*/phys (e.g. udev) to identify input device nodes. Taken from Darren Salt's dvb-ir patchset. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4875): budget-ci IR: groundwork for following patchesDavid Hardeman
This patch lays down some groundwork for later budget-ci patches. The bulk of this consists of moving a few members into a new struct and renaming a few of them. It also allocates extra space for the device name (the "name" field in /proc/bus/input/devices and in the relevant sysfs dir) to avoid truncation and uses snprintf rather than sprintf in case the extra space shouldn't be enough. Taken from Darren Salt's dvb-ir patchset Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4867): Whitespace cleanupMichael Krufky
- adhere to 80-column limit - replace some spaces with tabs Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4855): Support KNC1 DVBC cards with alternative tda10021 i2c addressAndrew de Quincey
For some reason, some of these cards have the tda10021 configured to a different address. This adds support for such cards Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4854): Handle errors from input_register_device()Dmitry Torokhov
Also sprinkled some input_sync() throughout the code. Acked-by: Ricardo Cerqueira <v4l@cerqueira.org> Acked-by: Oliver Endriss <o.endriss@gmx.de> Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4833): Patch for SATELCO EasyWatch PCI (DVB-C)Thomas Hamm
Add support for Satelco EasyWatch PCI DVBC cards Signed-off-by: Thomas Hamm <thhamm@t-online.de> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-30Fix misc .c/.h comment typosMatt LaPlante
Fix various .c/.h typos in comments (no code changes). Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-26V4L/DVB (4840): Budget: diseqc_method module parameter for cards with ↵Oliver Endriss
subsystem-id 13c2:1003 New module parameter diseqc_method for cards with subsystem-id 13c2:1003. - 0: unreliable method, can be used by all board revisions (default) - 1: reliable method, works for newer board layouts only The parameter has no effect for cards with other subsystem-ids. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-26V4L/DVB (4831): Fix tuning on older budget DVBS cards.Andrew de Quincey
Fixes to DISEQC on these cards inadvertently broke normal tone/voltage signalling. This restores the necessary function. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-02V4L/DVB (4787): Budget-ci: Inversion setting fixed for Technotrend 1500 TRaymond Mantchala
Technotrend 1500 T card have "inverted inversion". This patch fixes that. Many thanks to Martin Zwickel from Technotrend for his confirmation and correction proposal. Signed-off-by: Raymond Mantchala <raymond.mantchala@streamvision.fr> Signed-off-by: Perceval Anichini <perceval.anichini@streamvision.fr> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-02V4L/DVB (4785): Budget-ci: Change DEBIADDR_IR to a safer defaultDavid Härdeman
The IR chip has no address decoding, so the IR data is always present in the high byte when doing a read from the saa7146 chip. This means that the DEBI address used is irrelevant to the IR decoding logic. DEBI addresses 0x1XXX are mapped to the registers on the CI module itself, but only the lowest two bits are actually used (see EN50221, section A.2.2.1), meaning that 0x1234 is equivalent to 0x1000 which maps to register 0 (the data register). A read from the data register is supposed to be preceded by a read from the size register, so some CI modules will be confused (the AlphaCrypt CAM will hang completely). The attached patch changes the address used when reading the IR data to use 0x4000 instead. This is the CI version address, which is a safer default, works with the AlphaCrypt CAM and matches the behaviour of the Windows driver (AFAIK). Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4631): Av7110: remove V4L2_CAP_VBI_CAPTURE flagOliver Endriss
Implement fix suggested by Michael Hunold for a bug reported by Philipp Matthias Hahn: Starting "kdetv" on a Siemens DVB-C 1.x produced an oops because kdetv opened "/dev/vbi0". Remove the V4L2_CAP_VBI_CAPTURE flag because it does not work with this type of hardware anyway. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4630): Av7110: FW_LOADER depemdency fixedOliver Endriss
Do not select FW_LOADER unless it is really required. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4607): Port budget-av to use the new tua6100 driverAndrew de Quincey
Port budget-av to use the new tua6100 driver Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4501): Add support for knc one dvb-s plus with 1894:0011Christoph Pfister
Apparently there are two types of knc1 dvb-s plus cards with different tuners (as for the knc1 dvb-s ones). This patch adds support for those cards with subsystem id 1894:0011. Successfully tested by: Benjamin Weber <benny1990@gmail.com> Signed-off-by: Christoph Pfister <christophpfister@gmail.com> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4500): Fix KNC1 DVBC supportAndrew de Quincey
This actually needs the same configuration as the other DVBC cards; simply no one had managed to test before to find out. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4480): Remove null chars from dvb namesDave Jones
DVB null terminates its device names, which seems odd, and should be unnecessary. Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4478): [av7110] Support Grundig DVB-T tuner for sub-system 13c2:0001Oliver Endriss
Some DVB-T cards with Grundig 29504-401 tuner use subsystem id 13c2:0001 (reported by Stuart Butterfield). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4424): Add missing dvb-pll Kconfig infrastructureAndrew de Quincey
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4402): Fix budget-ci to use dvb_frontend_detach()Andrew de Quincey
I missed one call during the dvb_attach() development. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4397): Add tda10086 support for TT DVB-S-1401Andrew de Quincey
Add the necessary code and makefile infrastructure Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4391): Refactor dvb_detach calls into a single dvb_frontend_detach ↵Andrew de Quincey
function. Remove buggy dvb_detach() macro and replace with unified dvb_frontend_detach() call. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4386): Convert DVB devices to use dvb_attach()Andrew de Quincey
Only devices using > 1 frontend were ported; ones which did not are left using static binding. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4384): Remove remaining static function callsAndrew de Quincey
Rewrote _write() calls to use write() op. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4383): Convert SEC drivers to new frontend APIAndrew de Quincey
Convert SEC drivers to new frontend API Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4378): Ttpci/: remove unneeded #include <linux/byteorder/swabb.h>'sAdrian Bunk
Since av7110.c is the only file actually using something from this header, there's no reson for other files to Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4608b): i2c deps fix on DVBAndrew de Quincey
Several DVB modules depends on I2C Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4323): [budget/budget-av/budget-ci/budget-patch drivers] fixed DMA ↵Oliver Endriss
start/stop code Fix bug reported by Andrew de Quincey: After cold boot the saa7146 DMA did not start if the demuxer was opened before the frontend has locked to the signal. DMA transfers will be started now if (and only if) the frontend is locked and data should be sent to the demuxer. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4295): Fix typo in comment for TDA9819Marco Schluessler
Fix typo in comment for TDA9819 Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4293): Fix unstable DISEQC behaviour on budget cards.Andrew de Quincey
Use the stv0299 native DISEQC implementation instead of the bitbanging one as required by the ves1893. This was originally found by Oliver Endriss. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: Remove obsolete #include <linux/config.h> remove obsolete swsusp_encrypt arch/arm26/Kconfig typos Documentation/IPMI typos Kconfig: Typos in net/sched/Kconfig v9fs: do not include linux/version.h Documentation/DocBook/mtdnand.tmpl: typo fixes typo fixes: specfic -> specific typo fixes in Documentation/networking/pktgen.txt typo fixes: occuring -> occurring typo fixes: infomation -> information typo fixes: disadvantadge -> disadvantage typo fixes: aquire -> acquire typo fixes: mecanism -> mechanism typo fixes: bandwith -> bandwidth fix a typo in the RTC_CLASS help text smb is no longer maintained Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
2006-06-30V4L/DVB (4277): Fix CI interface on PRO KNC1 cardsAndrew de Quincey
The original driver had a restriction that if a card as an saa7113 chip, then it cannot have a CI interface. This is not the case. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30V4L/DVB (4276): Fix CI on old KNC1 DVBC cardsAndrew de Quincey
These cards do not need the tda10021 configuration change when data is streamed through a CAM module. This disables it for these ones. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26[PATCH] devfs: Remove the devfs_fs_kernel.h file from the treeGreg Kroah-Hartman
Also fixes up all files that #include it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26V4L/DVB (4219): Av7110: analog sound output of DVB-C rev 2.3Tim Kaiser
Added support for the msp34x5 audio dac. Analog sound output of Technotrend DVB-C 2300 (aka Hauppauge Nexus-CA) works now. Signed-off-by: Tim Kaiser <timkaiser@t-online.de> Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>