aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/bt8xx/bttv-risc.c
AgeCommit message (Collapse)Author
2009-03-30V4L/DVB (10562): bttv: rework the way digital inputs are indicatedTrent Piepho
The code was using a muxsel value of -1U to indicate a digital input. A couple places in were checking of muxsel < 0 to detect this, which doesn't work of course because muxsel is unsigned and can't be negative. Only a couple cards had digital inputs and it was always the last one, so for the card database create a one bit field that indicates the last input is digital. On init, this is used to set a new field in the bttv struct to the digital input's number or UNSET for none. This makes it easier to check if the current input is digital. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warningsHans Verkuil
Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-07-23V4L/DVB (8430): videodev: move some functions from v4l2-dev.h to ↵Hans Verkuil
v4l2-common.h or v4l2-ioctl.h The functions in a header should not belong to another module. The prio functions belong to v4l2-common.c, so move them to v4l2-common.h. The ioctl functions belong to v4l2-ioctl.c, so create a new v4l2-ioctl.h header and move those functions to it. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05V4L/DVB (7965): annotate bcx_riscmemAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6600): V4L: videobuf: don't chew up namespace STATE_.*, convert to ↵Brandon Philips
VIDEOBUF_ s/STATE_NEEDS_INIT/VIDEOBUF_NEEDS_INIT/g s/STATE_PREPARED/VIDEOBUF_PREPARED/g s/STATE_QUEUED/VIDEOBUF_QUEUED/g s/STATE_ACTIVE/VIDEOBUF_ACTIVE/g s/STATE_DONE/VIDEOBUF_DONE/g s/STATE_ERROR/VIDEOBUF_ERROR/g s/STATE_IDLE/VIDEOBUF_IDLE/g Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6252): Adapt drivers to use the newer videobuf modulesMauro Carvalho Chehab
PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo. Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct. So, to access it, a subroutine call is needed. This patch renames all occurences of those function calls to be consistent with the video-buf split. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-02-21V4L/DVB (5077): Bttv cropping supportMichael Schimek
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting applications to capture or overlay a subsection of the picture or to extend the capture window beyond active video, into the VBI area and the horizontal blanking. VBI capturing can start and end on any line, including the picture area, and apps can capture different lines of each field and single fields. For compatibility with existing applications, the open() function resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP call is necessary to actually enable cropping. Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image width will increase from 640 and 768 to 747 and 923 pixels respectively. Like the VBI changes however, this should only affect applications which depend on former driver limitations, such as never getting more than 640 pixels regardless of the requested width. Also, new freedoms require additional checks for conflicts and some applications may not expect an EBUSY error from the VIDIOC_QBUF and VIDIOCMCAPTURE ioctls. These errors should be rare though. So far, the patch has been tested on a UP machine with a bt878 in PAL- BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/ libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2 I'd be grateful about comments or bug reports. Signed-off-by: Michael H. Schimek <mschimek@gmx.at> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-05-12V4L/DVB (3704): Fix some errors on bttv_risc_overlayDuncan Sands
There are tree mistakes on bttv_risc_overlay. 1) When skip_odd is true, the number of lines for which instructions are written is (height+1)/2, not height/2. 2) This occurs when clipping: the number of instruction bytes written can be as much as 8 + 12*nclips, not 8 + 8*nclips, as currently estimated. 3) Coverity check were wrong with nskips=0, since it means that it can clipped at most one line. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-24V4L/DVB (3539): Move bttv fragments to bt8xx/Manu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>