aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/bt8xx
AgeCommit message (Collapse)Author
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16V4L/DVB (12004): poll method lose race conditionFigo.zhang
bttv-driver.c,cx23885-video.c,cx88-video.c: poll method lose race condition for capture video. Signed-off-by: Figo.zhang <figo1802@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11895): bt8xx: remove always false ifFilipe Rosset
Remove always false if over unsigned int variable Signed-off-by: Filipe Rosset <rosset.filipe@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11853): minor have assigned value twicefigo.zhang
The variable minor have assigned value twice, the first time is in the initial "video_device" data struct in those drivers, pls see saa7134-video.c,line 2503. --- Signed-off-by: Figo.zhang <figo.zhang@kolorific.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11844): ir-kbd-i2c: Switch to the new-style device binding modelJean Delvare
Let card drivers probe for IR receiver devices and instantiate them if found. Ultimately it would be better if we could stop probing completely, but I suspect this won't be possible for all card types. There's certainly room for cleanups. For example, some drivers are sharing I2C adapter IDs, so they also had to share the list of I2C addresses being probed for an IR receiver. Now that each driver explicitly says which addresses should be probed, maybe some addresses can be dropped from some drivers. Also, the special cases in saa7134-i2c should probably be handled on a per-board basis. This would be more efficient and less risky than always probing extra addresses on all boards. I'll give it a try later. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06V4L/DVB (11380): v4l2-subdev: change s_routing prototypeHans Verkuil
It is no longer needed to use a struct pointer as argument, since v4l2_subdev doesn't require that ioctl-like approach anymore. Instead just pass the input, output and config (new!) arguments directly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11377): v4l: increase version numbers of drivers converted to ↵Hans Verkuil
v4l2_subdev. With all the v4l2_subdev changes that were made to these drivers it is a good idea to increase the version number of each driver. It's just the patch level that is increased, except for the zoran and saa7146 drivers where the minor number was increased due to the more substantial changes that were made to those two drivers. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11376): tvaudio.h: add static inline to retrieve the list of ↵Hans Verkuil
possible i2c addrs. Rather than duplicating this list everywhere, just put it in tvaudio.h. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11375): v4l2: use v4l2_i2c_new_probed_subdev_addr where appropriate.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11373): v4l2-common: add explicit v4l2_device pointer as first arg ↵Hans Verkuil
to new_(probed)_subdev The functions v4l2_i2c_new_subdev and v4l2_i2c_new_probed_subdev relied on i2c_get_adapdata to return the v4l2_device. However, this is not always possible on embedded platforms. So modify the API to pass the v4l2_device pointer explicitly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11370): v4l2-subdev: move s_std from tuner to core.Hans Verkuil
s_std didn't belong in the tuner ops. Stricly speaking it should be part of the video ops, but it is used by audio and tuner devices as well, so it is more efficient to make it part of the core ops. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11281): bttv: move saa6588 config to the helper chip configHans Verkuil
saa6588 can also be used by other drivers than just bttv. Move it to a new RDS decoders category and add it as helper chip to bttv. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11279): bttv: tda9875 is no longer used by bttv, so remove from ↵Hans Verkuil
bt8xx/Kconfig. Since tda9875 support was merged into tvaudio the bttv driver no longer needs tda9875 as helper driver. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11278): bttv: convert to v4l2_subdev since i2c autoprobing will ↵Hans Verkuil
disappear. Since i2c autoprobing will disappear bttv needs to be converted to use v4l2_subdev instead. Without autoprobing the autoload module option has become obsolete. A warning is generated if it is set, but it is otherwise ignored. Since the bttv card definitions are of questionable value a new option was introduced to allow the user to control which audio module is selected: msp3400, tda7432 or tvaudio (or none at all). By default bttv will use the card definitions and fallback on tvaudio as the last resort. If no audio device was found a warning is printed. The saa6588 RDS device is now also explicitly probed since it is no longer possible to autoprobe it. A new saa6588 module option was added to override the card definition since I suspect more cards have this device than one would guess from the card definitions. Note that the probe addresses of the i2c modules are hardcoded in this driver. Once all v4l drivers are converted to v4l2_subdev this will be cleaned up. Such data belongs in an i2c driver header. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11262): bttv: Remove buffer type check from vidioc_g_parmTrent Piepho
The v4l2-ioctl core only allows buffer types for which the corresponding ->vidioc_try_fmt_xxx() methods are defined to be used with vidioc_(q|dq|query)bufs(), vidioc_reqbufs() and now vidioc_(s|g)_parm. The driver was only allowing VIDEO_CAPTURE buffers for g_parm, but since the driver defines ->vidioc_try_fmt_vid_overlay() and ->vidioc_try_fmt_vbi_cap() it will now allow VIDEO_OVERLAY and VBI_CAPTURE buffers as well. This should be fine as the driver only fills in the frame rate field, which is just as valid for video overlay and vbi capture as it is for video capture. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11124): Add support for ProVideo PV-183 to bttvAlan McIvor
Add support for ProVideo PV-183 to bttv This patch adds support for the ProVideo PV-183 card to the bttv device driver. The PV-183 is a PCI card with 8 BT878 devices plus a Hint Corp HiNT HB4 PCI-PCI Bridge. Each BT878 has two composite input channels available. There are no tuners on this card. Signed-off-by: Alan McIvor <alan.mcivor@reveal.co.nz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11051): v4l-dvb: replace remaining references to the old mailinglist.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11046): bttv: convert to v4l2_device.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10944): Conceptronic CTVFMI2 PCI IdRobert Millan
My BTTV_BOARD_CONCEPTRONIC_CTVFMI2 card wasn't auto-detected, here's a patch that adds its PCI id. lspci -nnv output: 05:06.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11) 05:06.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11) Press <break> within 3 seconds if this is wrong. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10907): avoid loading the entire videodev.h header on V4L2 driversMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10827): Add support for GeoVision GV-800(S)Bruno Christo
I have a GeoVision GV-800(S) card, it has 4 CONEXANT BT878A chips. It has 16 video inputs and 4 audio inputs, and it is almost identical to the GV-800, as seen on http://bttv-gallery.de . The only difference appears to be the analog mux, it has a CD22M3494 in place of the MT8816AP. The card has a blue PCB, as seen in this picture: http://www.gsbr.com.br/imagem/kits/GeoVision%20GV%20800.jpg . This card wasn't originally supported, and it was detected as UNKNOWN/GENERIC. The video inputs weren't working, so I tried "forcing" a few cards like the GeoVision GV-600, but there was still no video. So I made a patch to support this card, based on the Kodicom 4400r. The GV-800(S) is identified as follows: ... 02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) ... 02:00.0 0400: 109e:036e (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdfff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:00.1 0480: 109e:0878 (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:04.0 0400: 109e:036e (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffd000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:04.1 0480: 109e:0878 (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffc000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:08.0 0400: 109e:036e (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffb000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:08.1 0480: 109e:0878 (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffa000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:0c.0 0400: 109e:036e (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff9000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:0c.1 0480: 109e:0878 (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff8000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 As you can see, the GV-800(S) card is almost identical to the GV-800 on bttv-gallery, so this patch might also work for that card. If not, only a few changes should be required on the gv800s_write() function. After this patch, the video inputs work correctly on linux 2.6.24 and 2.6.27 using the software 'motion'. The input order may seem a little odd, but it's the order the original software/driver uses, and I decided to keep that order to get the most out of the card. I tried to get the audio working with the snd-bt87x module, but I only get noise from every audio input, even after selecting a different mux with alsamixer. Also, after trying to play sound from those sources, I randomly get a RISC error about an invalid RISC opcode, and then that output stops working. I also can't change the sampling rate when recording. Any pointers to adding audio support are welcome. Signed-off-by: Bruno Christo <bchristo@inf.ufsm.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10815): bttv: Don't need to zero ioctl parameter fieldsTrent Piepho
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is supposed to fill in for read-only ioctls. For read/write ioctls, all the fields which aren't supplied from userspace will be zeroed out. Zeroing code is removed from enum_input and g_tuner. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10813): v4l2: New function v4l2_video_std_frame_periodTrent Piepho
Some code was calling v4l2_video_std_construct() when all it cared about was the frame period. So make a function that just returns that and have v4l2_video_std_construct() use it. At this point there are no users of v4l2_video_std_construct() left outside of v4l2-ioctl, so it could be un-exported and made static. Change v4l2_video_std_construct() so that it doesn't zero out the struct v4l2_standard passed in. It's already been zeroed out in the common ioctl code. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10568): bttv: dynamically allocate device dataTrent Piepho
The bttv driver had static array of structures for up to 16 possible bttv devices, even though few users have more than one or two. The structures were quite large and this resulted in a huge BSS segment. Change the driver to allocate the bttv device data dynamically, which changes "struct bttv bttvs[BTTV_MAX]" to "struct bttv *bttvs[BTTV_MAX]". It would be nice to get ride of "bttvs" entirely but there are some complications with gpio access from the audio & mpeg drivers. To help bttvs removal along anyway, I changed the open() methods use the video device's drvdata to get the driver data instead of looking it up in the bttvs array. This is also more efficient. Some WARN_ON()s are added in cases the device node exists by the bttv device doesn't, which I don't think should be possible. The gpio access functions need to check if bttvs[card] is NULL now. Though calling them on a non-existent card in the first place is wrong, but hard to solve given the fundamental problems in how the gpio access code works. This patch reduces the bss size by 66560 bytes on ia32. Overall change is a reduction of 66398 bytes, as the WARN_ON()s add some 198 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10567): bttv: shrink muxsel data in card databaseTrent Piepho
Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10566): bttv: clean up mux code for IDS EagleTrent Piepho
This card apparently uses an external mux and the Bt878's mux should always be set to MUX2. The values for the external mux control bits were stored in the muxsel field. This meant that when changing inputs the driver would switch the Bt878's mux to whatever value the external mux was supposed to be set to, then eagle_muxsel() would switch it back to MUX2 and program the external mux. This creates an unnecessary switch of the Bt878's mux. So change muxsel to be 2 for each input. The external mux bits are just "input&3" so they don't really need to be stored anywhere. This also eliminates the last non-standard use of the muxsel data. Cc: M G Berberich <berberic@fmi.uni-passau.de> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10565): bttv: fix external mux for RemoteVision MXTrent Piepho
Old versions of the bttv driver would use the high nibble of an input's muxsel value to program the GPIO lines enabled via gpiomask2. Apparently this was supposed to be for switching external audio muxes. Anyway, the code that did this was removed sometime in the pre-git 2.6 series. The RemoteVision MX board used this feature to control an external video mux and I guess no one noticed when they removed the code. Move the extra gpio mux data out of the high nibble of muxsel and to rv605_muxsel(), then have that function set the gpio lines with it. From looking at the CD22M3494E datasheet, it seems like the mdelay(1) is a much longer delay than necessary. It looks like only around 20 ns is necessary. Cc: Miguel Freitas <miguel@cetuc.puc-rio.br> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10564): bttv: fix external mux for PHYTEC VD-009Trent Piepho
Old versions of the bttv driver would use the high nibble of an input's muxsel value to program the GPIO lines enabled via gpiomask2. Apparently this was supposed to be for switching external audio muxes. Anyway, the code that did this was removed sometime in the pre-git 2.6 series. These phytec boards used this feature to control an external video mux and I guess no one noticed when they removed the code. So add a muxsel_hook for these boards that does the necessary gpio setting. BTW, I doubt the needs_tvaudio setting for these cards is correct. Cc: Dirk Heer <d.heer@phytec.de> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10563): bttv: clean up mux code for IVC-120GTrent Piepho
The card data for BTTV_BOARD_IVC120 set muxsel to a bunch of bogus values (1 to 16), which the common mux code would use to set the Bt878's mux to some random value. Then the custom code in ivc120_muxsel() would change the Bt878's mux to the right value (always MUX0). Better to just make the muxsel data correct (all zeros, easy!) and get the mux right to begin with. Then the extra Bt878 mux setting code in ivc120_muxsel() can be eliminated (the rest of the code for the IVC-120G's external mux is still there of course). This will help me clean up muxsel for some other changes. It should also get rid of an unnecessary mux switch when changing from certain inputs to certain other inputs on the IVC-120G. Cc: Alan Garfield <alan@fromorbit.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10562): bttv: rework the way digital inputs are indicatedTrent Piepho
The code was using a muxsel value of -1U to indicate a digital input. A couple places in were checking of muxsel < 0 to detect this, which doesn't work of course because muxsel is unsigned and can't be negative. Only a couple cards had digital inputs and it was always the last one, so for the card database create a one bit field that indicates the last input is digital. On init, this is used to set a new field in the bttv struct to the digital input's number or UNSET for none. This makes it easier to check if the current input is digital. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10561): bttv: store card database more efficientlyTrent Piepho
The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10560): bttv: make tuner card info more consistentTrent Piepho
The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10559): bttv: Fix TDA9880 norm setting codeTrent Piepho
The code to set the norm for the TDA9880 analog demod was comparing btv->norm, an index into the bttv driver's norm array, to V4L2_STD_NTSC, which is a bit flag that's part of the V4L2 API. This doesn't work of course and results in the PAL path always being taken. What's more, it modified the bttv_tvcards[] entries for cards using the TDA9880. This is wrong because changing the norm on one card will also affect other cards of the same type. Writing to bttv_tvcards is also bad because it should be read-only or even devinitdata. Changing the norm would also cause the audio to become unmuted. Have the code get called for both norm setting and audio input setting (which where the gpios are set) to avoid needed to modify bttv_tvcards. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10558): bttv: norm value should be unsignedTrent Piepho
The norm value in the driver is an index into an array and the the driver doesn't allow it to be negative or otherwise invalid. It should be unsigned but wasn't in all places. Fix some structs and functions to have the norm be unsigned. Get rid of useless checks for "< 0". Most of the driver code can't handle a norm value that's out of range, so change some ">= BTTV_TVNORMS" checks to BUG_ON(). There's no point in silently ignoring invalid driver state just to crash because of it later. Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10299): bttv: Add support for IVCE-8784 support for V4L2 bttv driverDouglas Kosovic
It's a quad Bt878 PCI-e x1 capture board that's basically the same as the IVC-200 (quad Bt878 PCI) capture board that's currently supported in the V4L2 bttv driver. Manufacturer's web page for IVCE-8784 with photo and info: http://www.iei.com.tw/en/product_IPC.asp?model=IVCE-8784 Signed-off-by: Douglas Kosovic <douglask@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-03V4L/DVB (10173): Missing v4l2_prio_close in radio_releaseUdo Steinberg
The radio_release function of the BTTV driver is missing a call to v4l2_prio_close. As a result, after the radio device has been opened at least once (e.g., by HAL during bootup), v4l2_priority will never drop below V4L2_PRIORITY_INTERACTIVE again. With the following patch against 2.6.28, applications that run with V4L2_PRIORITY_BACKGROUND are able to open devices again. Previous Linux versions are affected as well. Signed-off-by: Udo Steinberg <udo@hypervisor.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02V4L/DVB (10141): v4l2: debugging API changed to match against driver name ↵Hans Verkuil
instead of ID. Since the i2c driver ID will be removed in the near future we have to modify the v4l2 debugging API to use the driver name instead of driver ID. Note that this API is not used in applications other than v4l2-dbg.cpp as it is for debugging and testing only. Should anyone use the old VIDIOC_G_CHIP_IDENT, then this will be logged with a warning that it is deprecated and will be removed in 2.6.30. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02V4L/DVB (10135): v4l2: introduce v4l2_file_operations.Hans Verkuil
Introduce a struct v4l2_file_operations for v4l2 drivers. Remove the unnecessary inode argument. Move compat32 handling (and llseek) into the v4l2-dev core: this is now handled in the v4l2 core and no longer in the drivers themselves. Note that this changeset reverts an earlier patch that changed the return type of__video_ioctl2 from int to long. This change will be reinstated later in a much improved version. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9940): bt832: remove this driverHans Verkuil
The bt832 i2c driver was never used or even compiled and is no longer maintained. It is now removed completely. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing onesDirk Heer
This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9523): Increase number of BT8XX devices supported in a systemAlan McIvor
The BT8XX device driver currently only supports 16 such devices in a system. This is too small for many surveillance applications. This patch increases the number to 32. Signed-off-by: Alan McIvor <alan.mcivor@reveal.co.nz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9521): V4L: struct device - replace bus_id with dev_name(), ↵Kay Sievers
dev_set_name() This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device". To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time. We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id. We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation. Thanks, Kay Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9327): v4l: use video_device.num instead of minor in video%dHans Verkuil
The kernel number of a v4l2 node (e.g. videoX, radioX or vbiX) is now independent of the minor number. So instead of using the minor field of the video_device struct one has to use the num field: this always contains the kernel number of the device node. I forgot about this when I did the v4l2 core change, so this patch converts all drivers that use it in one go. Luckily the change is trivial. Cc: michael@mihu.de Cc: mchehab@infradead.org Cc: corbet@lwn.net Cc: luca.risolia@studio.unibo.it Cc: isely@pobox.com Cc: pe1rxq@amsat.org Cc: royale@zerezo.com Cc: mkrufky@linuxtv.org Cc: stoth@linuxtv.org Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9160): v4l: remove vidioc_enum_fmt_vbi_capHans Verkuil
Remove the vidioc_enum_fmt_vbi_cap ops: it was scheduled for removal in 2.6.28 since the v4l2 specification says that V4L2_BUF_TYPE_VBI_CAPTURE should not support VIDIOC_ENUM_FMT. It's also pretty pointless. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8956): bttv: Turn video_nr, vbi_nr and radio_nr into arraysJean Delvare
With video_nr, vbi_nr and radio_nr being simple integers, it is not possible to use these parameters on a system with multiple bttv adapters (which happens to be my case.) video_register_device() will always fail on the second and later adapters. Turn these parameters into arrays, as many other V4L drivers are already doing, so that they can be used on such systems. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8879): bttv: Don't unmask VPRES interruptJean Delvare
When the input is set to tuner and no antenna is connected, the BT848 can flood VPRES interrupts. So we don't want to enable this type of interrupts when the input it set to tuner. As we don't do anything when receiving such an interrupt anyway, the easiest fix is to simply not unmask this specific interrupt. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8628): bttv: Add support for Encore ENLTV2-FMMauro Carvalho Chehab
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil (www.cdibrasil.com.br/) for sponsoring this development. Signed-off-by: Gilberto <gilberto@sistemafenix.com.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-10-12V4L/DVB (8627): Fix mute on bttv driverMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8613): v4l: move BKL down to the driver level.Hans Verkuil
The BKL is now moved from the video_open function in v4l2-dev.c to the various drivers. It seems about a third of the drivers already has a lock of some sort protecting the open(), another third uses video_exclusive_open (yuck!) and the last third required adding the BKL in their open function. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>