aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/cx18
AgeCommit message (Collapse)Author
2009-09-19V4L/DVB (12725): v4l: warn when desired devnodenr is in use & add _no_warn ↵Hans Verkuil
function Warn when the desired device node number is already in use, except when the new video_register_device_no_warn function is called since in some use-cases that warning is not relevant. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12723): ivtv/cx18: replace 'kernel number' with 'device node number'.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12540): v4l: simplify v4l2_i2c_new_subdev and friendsHans Verkuil
Rewrite v4l2_i2c_new_subdev as a simplified version of v4l2_i2c_new_subdev_cfg and remove v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr. This simplifies this API substantially. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12884): cx18: Eliminate warning about discarding 'const' is ↵Andy Walls
assignment for IR init i2c-kbd-i2c allows a bridge driver to pass information about IR configuration, but uses a "void *" to pass along what is essentially constant data. This change casts a const * to a void * to remove the warning. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12699): cx18: ir-kbd-i2c initialization data should point to a ↵Andy Walls
persistent object ir-kbd-i2c's ir_probe() function can be called much later (i.e. at ir-kbd-i2c module load), than the lifetime of a struct IR_i2c_init_data allocated off of the stack in cx18_i2c_new_ir() at registration time. Make sure we pass a pointer to a persistent IR_i2c_init_data object at i2c registration time. Thanks to Brian Rogers for pointing out a solution, and Dustin Mitchell for testing against a 2.6.30 kernel. Reported-by: Dustin Mitchell <soxslayer@gmail.com> Reported-by: Brian Rogers <brian@xyzw.org> Tested-by: Dustin Mitchell <soxslayer@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12595): common/ir: use a struct for keycode tablesMauro Carvalho Chehab
Currently, V4L uses a scancode table whose index is the scancode and the value is the keycode. While this works, it has some drawbacks: 1) It requires that the scancode to be at the range 00-7f; 2) keycodes should be masked on 7 bits in order for it to work; 3) due to the 7 bits approach, sometimes it is not possible to replace the default keyboard to another one with a different encoding rule; 4) it is different than what is done with dvb-usb approach; 5) it requires a typedef for it to work. This is not a recommended Linux CodingStyle. This patch is part of a larger series of IR changes. It basically replaces the IR_KEYTAB_TYPE tables by a structured table: struct ir_scancode { u16 scancode; u32 keycode; }; This is very close to what dvb does. So, a further integration with DVB code will be easy. While we've changed the tables, for now, the IR keycode handling is still based on the old approach. The only notable effect is the redution of about 35% of the ir-common module size: text data bss dec hex filename 6721 29208 4 35933 8c5d old/ir-common.ko 5756 18040 4 23800 5cf8 new/ir-common.ko In thesis, we could be using above u8 for scancode, reducing even more the size of the module, but defining it as u16 is more convenient, since, on dvb, each scancode has up to 16 bits, and we currently have a few troubles with rc5, as their scancodes are defined with more than 8 bits. This patch itself shouldn't be doing any functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12367): cx18: Add i2c initialization for Z8F0811/Hauppage IR ↵Andy Walls
transceivers This patch add support to the cx18 driver for setting up the Z8F0811/Hauppauge IR Tx/Rx chip with the i2c binding model in newer kernels. Signed-off-by: Andy Walls <awalls@radix.net> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12343): Stop defining I2C adapter IDs nobody usesJean Delvare
There is no point in defining I2C adapter IDs when no code is using them. As this field might go away in the future, stop using it when we don't need to. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12207): cx18: Add an EEPROM dump routine for the Yuan MPC718 and ↵Andy Walls
future cards Add a routine for dumping the EEPROM of the MPC718. It is generic enough to use for other cards in the future that may have an EEPROM. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12199): remove redundant tests on unsignedRoel Kluin
input, inp and i are unsigned. When negative they are wrapped and caught by the other test. Cc: Andy Walls <awalls@radix.net> Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12196): cx18-fileops.c: Remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Andy Walls <awalls@radix.net> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12338): cx18: Read buffer overflowAndy Walls
This mistakenly tested against sizeof(freqs) instead of the array size. Due to the mask the only illegal value possible was 3. Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05V4L/DVB (12182): cx18: Add DVB-T support for Yuan MPC-718 cards with an ↵Andy Walls
MT352 or ZL10353 Add DVB-T support for Yuan MPC-718 cards with an MT352 or ZL10353 demodulator. There are apparently some units with a DiBcom demodulator which could be supported by one of the dib7000 modules - but this is not implemented in the cx18 driver (yet). Due to lack of porgramming details for the MT352 and the mt352 module requiring a "demod_init" function, a "firmware" must be obtained and loaded to get DVB-T working for Yuan MPC-718 cards with an MT352. Tested-by: Steve Firth <firth650@btinternet.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05V4L/DVB (12180): cx18: Update Yuan MPC-718 card entry with better ↵Andy Walls
information and guesses Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (12104): ivtv/cx18: fix regression: class controls are no longer seenHans Verkuil
A previous change (v4l2-common: remove v4l2_ctrl_query_fill_std) broke the handling of class controls in VIDIOC_QUERYCTRL. The MPEG class control was broken for all drivers that use the cx2341x module and the USER class control was broken for ivtv and cx18. This change adds back proper class control support. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11951): cx18: Add DVB-T support for the Leadtek WinFast DVR3100 HAndy Walls
This adds support for DVB-T on the Leadtek DVR3100 H and should also get analog TV capture from the tuner working properly as well. DVB-T 6 MHz and 8 MHz have been tested and verified to work by Terry Wu of Leadtek. DVB-T 7 MHz has also been verified working with a change developed by Terry to the tuner-xc2028.c driver. Special thanks go to Terry Wu <terrywu2009@gmail.com> of Leadtek who provided the needed information and testing to get digital TV working for the Leadtek DVR3100 H. Reported-by: Terry Wu <terrywu2009@gmail.com> Tested-by: Terry Wu <terrywu2009@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11950): cx18: Split LeadTek PVR2100 and DVR3100 H into 2 separate ↵Andy Walls
card entries Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11898): cx18: Perform 64 bit divide so it works for 32 bit systemsAndy Walls
Thanks to David Ward and Mike Krufky for reporting the problem and debugging this as an unresolved symbol due to a 64 bit divide on a 32 bit system. David Ward provided the content of this patch; Andy Walls only performed some cosmetic edits. Reported-by: David Ward <david.ward@gatech.edu> Signed-off-by: David Ward <david.ward@gatech.edu> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11865): cx18: Tweak color burst gate delay and initial color ↵Andy Walls
sub-carrier freq Fix the burst gate delays to use a crystal value of 28636360 as assumed by the rest of the driver. Also have the initial color sub-carrier freq paramter use the src decimation ratio per the documentation, instead of the actual crystal/pixel clock ratio. The tracking circuit will find the correct color subcarrier in any case, as long as we're close. Also fix up some debug print statements. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11864): cx18: Complete support for Sliced and Raw VBI for 625 line ↵Andy Walls
systems Finish changes for sliced and raw VBI for 625 line systems. Tested with VPS and WSS being emitted by a PVR-350 in field 1 lines 16 and 23. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11863): cx18: Initial attempt to get sliced VBI working for 625 ↵Andy Walls
line systems Initial changes to get sliced VBI for 625 line system working. This is patch is untested. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11752): cx18: Add missing newline to tuner detection error messageAndy Walls
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11703): cx18: Have audio decoder drive SIF gain control, and rework ↵Andy Walls
AFE config Ensure the variable gain amplifier gain for SIF is driven by the audio deocder and not the video decoder. This forced rework of the analog front end (AFE) configuration to not rely on autoconfiguration, but instead set up the AFE mux, AFE parameters, and ADC1 & ADC2 configurations explicitly. Reported-by: Helen Buus <mythtv@hbuus.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11624): cx18: Toggle the AI1 mux when changing the ↵Andy Walls
CX18_AUDIO_ENABLE register Toggle the AI1 mux when changing the CX18_AUDIO_ENABLE register. It's hard to reliably tell when we have written to this register successfully unless we change some bits we know we can read back. The AI mux bits always read back what we wrote to them, so force them to toggle whenever we have to write to the register, so we can tell we wrote to the register successfully. This change was prompted by users experiencing broadcast audio decoding problems after the cx18 module loads for the first time. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11623): cx18: Verify cx18-av-core digitizer firmware loads correctlyAndy Walls
Add code to verify the cx18-av-core digitizer firmware loads correctly. The verification function reads back and compares the firmware bytes loaded into the A/V core. The result of the verification is only used to log a message in the system log. This change was prompted by users with multiple card setups that have problems with broadcast audio decoding the first time the cx18 module is loaded. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11622): cx18: Allow IVTV format VBI insertion in MPEG-2 SVCD and ↵Andy Walls
DVD streams Both the MPEG-2 SVCD stream format and the MPEG-2 DVD stream format should use an MPEG-2 PS container. This makes it safe to stuff IVTV Private Stream 1 VBI packets in these stream types using the existing cx18 driver routines. Reported-by: Helen Buus <mythtv@hbuus.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11620): cx18: Increment version due to significant buffer handling ↵Andy Walls
changes Version bump from 1.1.0 to 1.2.0 Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11619): cx18: Simplify the work handler for outgoing mailbox commandsAndy Walls
Simplify the way outgoing work handler gets scheduled to send empty buffers back to the firmware for use. Also reduced the memory required for scheduling this outgoing work, by using a single, per stream work object. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11618): cx18: Convert per stream mutex locks to per queue spin locksAndy Walls
To avoid sleeps in providing buffers to user space and in handling incoming buffers from the capture unit, converted the per stream mutex for locking queues to 3 spin locks. There is now a spin lock per queue to increase concurrency when moving buffers around. Also simplified queue manipulations and buffer handling of incoming buffers of data from the capture unit. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11617): cx18: Set up to wait for a one-shot response before sending ↵Andy Walls
a firmware cmd When sending an outgoing firmware command, prepare to wait before we raise the interrupt, so we don't miss the wake_up() on the acknowledgment. When waiting for the acknowledgement, there is no need to loop around schedule(), as there will only be one interrupt, and hence one wake_up(), issued. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11616): cx18: Add a work queue for deferring empty buffer handoffs ↵Andy Walls
to the firmware This change defers sending all CX18_CPU_DE_SET_MDL commands, for a stream with an ongoing capture, by adding a work queue to handle sending such commands when needed. This prevents any sleeps, caused by notifying the firmware of new usable buffers, when a V4L2 application read() is being satisfied or when an incoming buffer is processed by the cx18-NN-in work queue thread. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11615): cx18: Rename the work queue to "in_work_queue"Andy Walls
Rename the work queue to "in_work_queue" to indicate it is handling incoming mailbox commands. This is preparation for adding a work queue for handling deferrable outgoing mailbox commands. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11568): cx18: Fix the handling of i2c bus registration errorJean Delvare
* Return actual error values as returned by the i2c subsystem, rather than 0 or 1. * If the registration of the second bus fails, unregister the first one before exiting, otherwise we are leaking resources. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11494): cx18: Send correct input routing value to external audio ↵Andy Walls
multiplexers A late v4l2_subdev framework change accidentally sent the audio input routing value to the external multiplexer, instead of the muxer input routing value to the external multiplexer. This change corrects that error. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11381): ivtv/cx18: remove VIDIOC_INT_S_AUDIO_ROUTING debug support.Hans Verkuil
Remove support for the debug call VIDIOC_INT_S_AUDIO_ROUTING from cx18 and ivtv. These internal ioctls shouldn't be exposed. These were only used through the cx18-ctl and ivtv-ctl utilities, and only when testing a new card variant. This cleanup allows the removal of this ioctl from v4l2-common.h. Cc: Andy Walls <awalls@radix.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11380): v4l2-subdev: change s_routing prototypeHans Verkuil
It is no longer needed to use a struct pointer as argument, since v4l2_subdev doesn't require that ioctl-like approach anymore. Instead just pass the input, output and config (new!) arguments directly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11373): v4l2-common: add explicit v4l2_device pointer as first arg ↵Hans Verkuil
to new_(probed)_subdev The functions v4l2_i2c_new_subdev and v4l2_i2c_new_probed_subdev relied on i2c_get_adapdata to return the v4l2_device. However, this is not always possible on embedded platforms. So modify the API to pass the v4l2_device pointer explicitly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11370): v4l2-subdev: move s_std from tuner to core.Hans Verkuil
s_std didn't belong in the tuner ops. Stricly speaking it should be part of the video ops, but it is used by audio and tuner devices as well, so it is more efficient to make it part of the core ops. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11369): v4l2-subdev: add load_fw and use that instead of abusing ↵Hans Verkuil
core->init. The init callback was used in several places to load firmware. Make a separate load_fw callback for that. This makes the code a lot more understandable. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11310): cx18: remove intermediate 'ioctl' stepHans Verkuil
The audio and vbi parts still used an 'ioctl'-like interface. Replace this with normal functions. Cc: Andy Walls <awalls@radix.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11127): Kconfig: replace all occurrences of CUSTOMIZE to CUSTOMISEMauro Carvalho Chehab
There are several Kconfig items using CUSTOMIZE. Yet, most use the English writing CUSTOMISE. This generates lots of trouble, because people sometimes type the Kbuild item different. Let's standardise every occurrence using the same syntax. The changes were generated by this small shell script: for i in `find linux -type f`; do sed s,CUSTOMIZE,CUSTOMISE,g $i >/tmp/a && mv /tmp/a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11092): cx18: Optimize processing of VBI buffers from the capture unitAndy Walls
Removed some unnecessary memcpy()'s by reworking the compress_*_vbi_buf() functions. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11091): cx18, ivtv: Ensure endianess for linemasks in VBI embedded ↵Andy Walls
in MPEG stream The sliced VBI payloads that cx18 and ivtv would insert in the MPEG stream did not have consistent endianess for the linemasks in the payload (a big endian platform would write them out big endian). This change ensures the linemasks are always stored as little-endian in the MPEG stream to ensure cross platform consistency in parsing the generated MPEG stream. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10856): cx18: Add interlock so sliced VBI insertion only happens ↵Andy Walls
for an MPEG PS The cx18 private packet insertion code only expects to operate on an MPEG PS when inserting private packets of sliced VBI data. This patch keeps the cx18 driver from corrupting the MPEG TS or other non-PS stream types, in case the user enables sliced VBI insertion for these MPEG stream types. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10855): cx18: Fix VPS service register codesAndy Walls
Based on a documentation clarification from Conexant, fix the register code used for sliced VBI VPS service. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10854): cx18: Correct comments about vertical and horizontal ↵Andy Walls
blanking timings This change only affects comments. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10853): cx18: Fix s-parse warnings and a logic error about ↵Andy Walls
extracting the VBI PTS My s-parse builds never griped about be32_to_cpu() casting to __be32, but Hans' builds did. This change explictly declares the pointer into the VBI buffer header as __be32, which is the correct thing to do as the data is always big endian when we go to fetch it. Hopefully this will quiet s-parse warnings. Also corrected a misplaced parenthesis logic error in checking for the VBI header magic number. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10852): cx18: Include cx18-audio.h in cx18-audio.c to eliminate ↵Andy Walls
s-parse warning Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10851): cx18: Fix a video scaling check problem introduced by ↵Andy Walls
sliced VBI changes Fix a scaling check that was failing, due to a magic number I missed fixing during previous slice VBI changes. Now $ v4l2-ctl -v width=480,height=480,pixelformat=MPEG yields proper visual results again. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10850): cx18: Use strlcpy() instead of strncpy() for temp eeprom ↵Andy Walls
i2c_client setup Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>