aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/cx25840/cx25840-audio.c
AgeCommit message (Collapse)Author
2008-01-25V4L/DVB (7002): cx25840: Add basic CX23885 AVCore supportSteven Toth
The cx23885/7/8 PCIe bridge has an internal AVCore modelled on the cx2584x family. Many of the registers positions are identical but some moved. The register values are also different because the different bridges run at different clock rates. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6743): cx25840: fix endianness inconsistencyHans Verkuil
cx25840_read4 reads a little-endian 32-bit value whereas cx25840_write4 writes the 32-bit value as big-endian. Convert write4 to use little-endian as well (that's the correct endianness). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6051): cx25840: make proper use of SOFT_RESETHans Verkuil
Whenever the 0x80b register is used the microcontroller should be reset. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5997): cx25840: fix audio mute handling and reportingHans Verkuil
Audio muting for the tuner input was implemented by stopping the audio microcontroller and restarting it on unmute. However, it appears that this method can actually crash the audio firmware. It's rare and seems to happen with NTSC only. It has been reimplemented by setting to volume to 0. In addition, the reporting of the mute state has been improved as well: it used to be impossible to detect whether the audio was muted by the user or if it was muted due to the microcontroller trying to detect the audio standard. This is now clearly stated. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (4008): Audio soft reset improvementsHans Verkuil
The soft reset (de)assert commands where not at the right place. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (4006): Stop/start microcontroller when changing sampling frequencyHans Verkuil
Stop/start microcontroller when changing sampling frequency to prevent tinny audio. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (4005): Add support for the cx25836/7 video decoder.Hans Verkuil
Signed-off-by: Scott Alfter <salfter@ssai.us> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-04-02V4L/DVB (3610): Added the new routing commands to cx25840.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-24V4L/DVB (3577): Cleanup audio input handlingHans Verkuil
Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-09V4L/DVB (3279): Added VIDIOC_QUERYCTRL to cx25840.Hans Verkuil
- Added VIDIOC_QUERYCTRL - Removed unnecessary inlines. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3249): Generalized cx25840 video/audio input handlingHans Verkuil
- Added VIDIOC_S_AUDIO to set the audio inputs separately. - Removed AUDC_SET_INPUT. - Made the video inputs much more general. - Removed cardtype CID and replaced with a CID to enable the PVR150 workaround. The cardtype is no longer necessary with the general video input change. - Update VIDIOC_LOG_STATUS output to show the video and audio inputs separately. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3214): Calculate the saa7115 AMCLK regs instead of using fixed valuesHans Verkuil
- Calculate the audio master clock registers from the actual frequencies. This simplifies the code and it also prepares for adding CGC2 support. - VIDIOC_INT_AUDIO_CLOCK_FREQ now receives an u32 instead of an enum. It is more generic and actually easier to implement. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-11-13[PATCH] v4l: (966.1) Removes Obsoleted i2c-compat.h from newer driversMauro Carvalho Chehab
Removed obsoleted i2c-compat.h file from cx25840, saa7115 and saa7127 drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13[PATCH] v4l: (946) adds support for cx25840 video decoderHans Verkuil
Adds support for cx25840 video decoder. Driver authors: Hans Verkuil, Chris Kennedy, Tyler Trafford, Ulf Eklund. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Chris Kennedy <c@groovy.org> Signed-off-by: Tyler Trafford <tatrafford@comcast.net> Thanks-to: Ulf Eklund <ivtv@eklund.to>. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>