aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/em28xx
AgeCommit message (Collapse)Author
2008-04-24V4L/DVB (7602): em28xx: generalise URB setup codeAidan Thornton
Move the URB setup and management code to em28xx-core.c and generalise it slighlty so that the DVB code can use it. Signed-off-by: Aidan Thornton <makosoft@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7601): em28xx-dvb: add support for the HVR-900Aidan Thornton
Adds the correct GPIOs and demod attach code for the HVR-900 Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7600): em28xx: Sets frequency when changing to analog modeMauro Carvalho Chehab
This will make tuner-xc2028 to change to analog, if needed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7599): em28xx-dvb: videobuf callbacks are waiting for em28xx_fhMauro Carvalho Chehab
Thanks to Devin Heitmueller <devin.heitmueller@gmail.com> for pointing this issue. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7598): em28xx: several fixes on gpio programmingDevin Heitmueller
em28xx-cards.c: - Fix reversed val/rst values in both analog_gpio and digital_gpio vectors - Fix crash that would was occurring during every analog startup while looping over gpio_ctl - Remove what appears to be a redundant setting of gpio_ctl->val - Don't use OREN538 demodulation for the HVR-950 (prevents ATSC scanning from working) em28xx-dvb.c: - Tuner should be in digital mode when issuing the reset - Add copyright - Change struct definition (corresponds to fix in em28xx-cards.c for gpio_ctl looping) Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7597): em28xx: share the same xc3028 setup for analog and digital modesMauro Carvalho Chehab
Thanks to Devin Heitmueller <devin.heitmueller@gmail.com> and Aidan Thornton" <makosoft@googlemail.com> for pointing some errors with the previous scenario. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7596): em28xx-dvb: Add support for HVR950Mauro Carvalho Chehab
This patch adds DVB support for Hauppauge HVR950. Thanks to Michael Krufky <mkrufky@linuxtv.org> for getting those values. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7595): Improve generic support for setting gpio valuesMauro Carvalho Chehab
em28xx based devices with xc3028 may require some specific gpio values. This patch adds a generic handling for such values. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7594): em28xx: Fix KconfigMauro Carvalho Chehab
Some devices have msp3400 audio decoder chip. Selects it, if em28xx. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7593): em28xx: add a module to handle dvbMauro Carvalho Chehab
This patch adds em28xx-dvb. This driver is highly based on cx88-dvb and saa7134-dvb. This code currently loads and unloads successfully. However, some changes are needed to properly support the mpeg streams and to setup em28xx to work on DVB mode. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7567): em28xx: Some cleanupsMauro Carvalho Chehab
Removes some fields from data structs. There are some fields that are just caching some calculus for buffer size. The calculus were moved to the places it were needed and the now unused fields were removed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7565): em28xx: fix buffer underrun handlingAidan Thornton
This patch fixes three related issues and a fourth trivial one: - Use buffers even if no-one's currently waiting for them (fixes underrun issues); - Don't return incomplete/mangled frames at the start of streaming and in the case of buffer underruns; - Fix an issue which could cause the driver to write to a buffer that's been freed after videobuf_queue_cancel is called (exposed by the previous two fixes - for some reason, ignoring buffers that weren't being waited on worked around the issue); - Fix a bug which could cause only one field to be filled in the first buffer (or first few buffers) after streaming is started. Signed-off-by: Aidan Thornton <makosoft@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7564): em28xx: Some fixes to display logicMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7563): em28xx: Add missing checksMauro Carvalho Chehab
There are some cases where nobody is waiting for a buffer. Due to the lack of check, if you try to abort the userspace app, machine were hanging, since IRQ were trying to use a buffer that were disallocated. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7559): em28xx: Fills the entire buffer, before getting another oneMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7557): em28xx: honour video_debug modprobe parameterMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7556): em28xx: fix locking on vidioc_s_fmt_capAidan Thornton
Currently, vidioc_s_fmt_cap is allowed even if streaming is running on some other fh. This is likely to cause issues. Block use of vidioc_s_fmt_cap if someone else has claimed access to the device. Signed-off-by: Aidan Thornton <makosoft@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7555): em28xx: remove timeoutMauro Carvalho Chehab
It seems that we don't need a timeout for em28xx. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7550): em28xx: Fix a possible memory leakBrandon Philips
I did notice a possible memory leak since iolock is could possibly be called before a buffer has been freed. This ensure s_fmt isn't called while the queue is busy thereby avoiding iolock on already allocated buffers. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7549): em28xx: some small cleanupsMauro Carvalho Chehab
- Remove dead code; - Fix a few CodingStyle issues; - Prints frame number, if debug is enabled. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7548): Various fixes for the em28xx videobuf codeAidan Thornton
- Aborting buffer_filled if no-one's waiting on the waitqueue probably isn't what we want, since just because no-one's waiting for it now doesn't mean they wouldn't dequeue it in time. (vivi gets away with this, possibly because it can fill each buffer much faster.) - The first BUG_ON(lencopy <= 0); really isn't worth causing a kernel panic over, especially since there are some reasons why it could trigger in normal use. - The top and botom frames are actually the wrong way around. Signed-off-by: Aidan Thornton <makosoft@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7547): em28xx: Fix a broken lockMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7545): em28xx: Fix CodingStyle errors and most warnings introduced ↵Mauro Carvalho Chehab
by videobuf The last videobuf changes introduced several CodingStyle errors. Fixes all those errors, as reported by checkpatch.pl Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7544): em28xx: Fix timeout codeMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7543): Fix capture start/stop and timeoutMauro Carvalho Chehab
Also removes the dead restart_video_queue() function Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7542): em28xx: Fix some warningsMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7541): em28xx: Some fixes to videobufAidan Thornton
It fixes a couple of minor bugs, comments out a bogus BUG_ON, sets fh->type correctly, uses dev->width and dev->height for now, and adds a missing spinlock init (nasty - caused a system lockup). It also adds some debug code which probably isn't all that useful. I haven't tested this version of the patch yet, though, so I'm not sure what you can expect if you try it. Signed-off-by: Aidan Thornton <makosoft@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7540): em28xx: convert to use videobuf-vmallocMauro Carvalho Chehab
The usage of videobuf-vmalloc allows to cleanup em28xx logic. Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64): 39113 4876 40 44029 abfd old/em28xx.ko 36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command. A test with time command presented an even better result: This is the performance tests I did, running code_example to get 1,000 frames @29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at 1,5GHz: The old driver: $ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example 0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used The videobuf-based driver: $ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example 0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used Conclusion: The time consumption to receive the stream where reduced from about 33.38 seconds to 0.05 seconds. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7522): media/video/em28xx replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7381): tuner: rename TUNER_PHILIPS_ATSC to TUNER_PHILIPS_FCV1236DMichael Krufky
TUNER_PHILIPS_ATSC is an ambiguous name for a tuner. Rename it to TUNER_PHILIPS_FCV1236D to be more descriptive. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7331): Fix em2800 altsetting selectionSascha Sommer
Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7094): static memoryDouglas Schilling Landgraf
- Static memory is always initialized with 0. - Replaced in some cases C99 comments for /* */ Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-20V4L/DVB (7291): em28xx: correct use of and fixAndrew Morton
be less silly while we're there. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-20V4L/DVB (7285): em28xx: Correct use of ! and &Julia Lawall
In commit e6bafba5b4765a5a252f1b8d31cbf6d2459da337, a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. This is not tested and clearly changes the semantics, so it is only something to consider. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E1,E2; @@ ( !E1 & !E2 | - !E1 & E2 + !(E1 & E2) ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7180): em28xx: add URB_NO_TRANSFER_DMA_MAP, since urb->transfer_dma ↵Mauro Carvalho Chehab
is set Thanks to Alan Stern <stern@rowland.harvard.edu> for pointing this issue. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7179): Allow more than one em28xx boardMauro Carvalho Chehab
em28xx driver is capable of handling more than one usb device. However, isoc transfers require a large amount of data to be transfered. Before this patch, just one em28xx board were enough to allocate more than 50% URBs: T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc=480/800 us (60%), #Int= 0, #Iso= 2 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 So, only one board could use an USB host at the same time. After the patch, it is possible to use more than one em28xx at the same time, on the same usb host, if the image size is slower or equal to 345600, since those images will require about 30% of the URBs: T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc=232/800 us (29%), #Int= 0, #Iso= 2 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 So, in thesis, after the patch, it would be possible to use up to 3 boards by each usb host, if the devices are generating small images. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7164): em28xx-alsa: Add a missing mutexMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7163): em28xx: makes audio settings more stableMauro Carvalho Chehab
Improves audio configurations on em28xx: - mutes audio before changing amux; - adds a delay after setting audio src; - waits up to 50ms for ac97 busy. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7162): em28xx: Fix endian and returns the correct valuesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7161): em28xx: Fix printing debug values higher than 127Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7160): em28xx: Allow register dump/setting for debugMauro Carvalho Chehab
Adds vidioc_[g|s]_register handlers. This allows getting/setting register from em28xx. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7158): Fix em28xx audio initializationMauro Carvalho Chehab
AC97 register initialization seem to always be needed. This patch fixes audio for Prolink/Pixelview USB2 board. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7156): em28xx/em28xx-core.c: fix use of potentially uninitialized ↵Andrew Morton
variable drivers/media/video/em28xx/em28xx-core.c: In function 'em28xx_set_audio_source': drivers/media/video/em28xx/em28xx-core.c:276: warning: 'no_ac97' may be used uninitialized in this function This looks like a genuine bug to me. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7132): Add USB ID for a newer variant of Hauppauge WinTV-HVR 900Luc Saillard
Device description: WinTV-HVR-900 M/R: 65018/B3C0 ##4207 Signed-off-by: Luc Saillard <luc@saillard.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7106): em28xx/: make 2 functions staticAdrian Bunk
This patch makes the following needlessly global functions static: - em28xx-core.c:em28xx_write_reg_bits() - em28xx-video.c:em28xx_vdev_init() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7049): Remove sound/driver.hMauro Carvalho Chehab
sound/driver.h is already included by sound/core. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-09drivers/media/video/em28xx/: Fix undefined symbol error with CONFIG_SND=NS.Çağlar Onur
Without this you get undefined symbol errors with CONFIG_SND=N: ERROR: "snd_pcm_period_elapsed" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined! ERROR: "snd_pcm_hw_constraint_integer" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined! ERROR: "snd_pcm_set_ops" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined! ERROR: "snd_pcm_lib_ioctl" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined! ERROR: "snd_card_new" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined! ERROR: "snd_card_free" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined! ERROR: "snd_card_register" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined! ERROR: "snd_pcm_new" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined! Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-25V4L/DVB (7060): em28xx: remove has_tunerMauro Carvalho Chehab
has_tuner flag doesn't make much sense, since tuner_type=TUNER_ABSENT means the same thing. Having two ways to say that a tuner is not present is not nice, since it may lead to bad setups. In fact, with the previous code, if a device were using has_tuner=0, but the user forces a tuner, with modprobe option tuner=type, the modprobe option won't work. Also, tveeprom returns TUNER_ABSENT, when tuner is unknown or absent. So, with the previous logic, in this case, the driver should set has_tuner=0, or has_tuner=1 otherwise. Instead of adding several additional tests and setups, better just to remove .has_tuner. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7021): Move all board specific configuration to em28xx-cards.cMauro Carvalho Chehab
This cleanup moves the board-specific configurations to em28xx-cards.c. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7020): Add USB ID for a newer variant of Hauppauge WinTV USB2Mauro Carvalho Chehab
Thanks to Jeroen Janssen <Jeroen.Janssen@vub.ac.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-10 02:07:22 +0000