aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/ivtv/ivtv-ioctl.c
AgeCommit message (Collapse)Author
2008-07-26V4L/DVB (8482): videodev: move all ioctl callbacks to a new v4l2_ioctl_ops ↵Hans Verkuil
struct All ioctl callbacks are now stored in a new v4l2_ioctl_ops struct. Drivers fill in a const struct v4l2_ioctl_ops and video_device just contains a const pointer to it. This ensures a clean separation between the const ops struct and the non-const video_device struct. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8113): ivtv/cx18: remove s/g_ctrl, now all controls are handled ↵Hans Verkuil
through s/g_ext_ctrl videodev converts old-style controls to an extended control so the ivtv and cx18 drivers no longer have to handle both. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8111): ivtv/cx18: fix compile error when CONFIG_VIDEO_ADV_DEBUG is ↵Hans Verkuil
not defined. Thanks to Randy Dunlap for reporting this. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8104): cx18/ivtv: ioctl debugging improvementsHans Verkuil
Completely rely on the video_ioctl2 debugging facilities rather than doing it ourselves. Fill in some missing fields in ivtv with VIDIOC_G_FBUF. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8090): ivtv: yuv decoder lock fix (2)Ian Armstrong
The IVTV_IOC_DMA_FRAME ioctl fails to correctly 'start' the decoder. Although yuv output will be correct, some functions which should be disabled while the decoder is in use remain enabled. This can result in hardware registers being corrupted, causing problems with the mpeg decoder. This patch ensures the decoder 'start' sequence is called, disabling these functions until the device is closed. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8086): ivtv/cx18: fix video_temporal_filter handlingHans Verkuil
If the capture is scaled, then the video_temporal_filter is set to 0 by the cx2341x.c module since otherwise you would get ghosting. However, this was also done in the VIDIOC_S_FMT ioctl which meant that the video_temporal_filter control was reset to 0 or 8 each time S_FMT was called. This was old code that should have been removed a long time ago. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8085): ivtv: fill in all v4l2_framebuffer fields in VIDIOC_G/S_FBUFHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8084): ivtv/cx18: remove unnecessary memsets & KERNEL_VERSION testsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8081): ivtv: remove obsolete arrays.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8080): ivtv: make sure all v4l2_format fields are filled inHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8079): ivtv: Convert to video_ioctl2.Hans Verkuil
Based on an initial conversion patch from Douglas Landgraf. Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-14V4L/DVB (7852): ivtv: prefix ivtv external functions with ivtv_Hans Verkuil
Fix conflict with cx18 driver. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7758): ivtv: fix oops when itv->speed == 0 and VIDEO_CMD_PLAY is calledHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7756): ivtv: use strlcpy instead of strcpyHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7729): Fix VIDIOCGAP corruption in ivtvAlan Cox
Frank Bennett reported that ivtv was causing skype to crash. With help from one of their developers he showed it was a kernel problem. VIDIOCGCAP copies a name into a fixed length buffer - ivtv uses names that are too long and does not truncate them so corrupts a few bytes of the app data area. Possibly the names also want trimming but for now this should fix the corruption case. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7558): videobuf: Improve command output for debug purposesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7244): ivtv: CROP is not supported for video captureHans Verkuil
CROPCAP suggests that video capture supports cropping, but this is not the case. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7243): ivtv: yuv framebuffer trackingIan Armstrong
The existing yuv code limits output to the display area occupied by the framebuffer. This patch allows the yuv output to be 'detached' via V4L2_FBUF_FLAG_OVERLAY. By default, the yuv output window will be restricted to the framebuffer dimensions and the output position is relative to the top left corner of the framebuffer. This matches the behaviour of previous versions. If V4L2_FBUF_FLAG_OVERLAY is cleared, the yuv output will no longer be linked to the framebuffer. The maximum dimensions are either 720x576 or 720x480 depending on the current broadcast standard, with the output position relative to the top left corner of the display. The framebuffer itself can be resized, moved and panned without affecting the yuv output. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6776): ivtv: Some general fixesRichard Knutsson
Fix "warning: Using plain integer as NULL pointer". Convert 'x < y ? x : y' to use min() instead. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6731): ivtv: Remove a invalid shadow-variableRichard Knutsson
Remove the shadowing 'struct v4l2_chip_ident *chip', since it already exists and makes the if-statement useless. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6718): ivtv: ivtv yuv format description correctionIan Armstrong
The driver was incorrectly reporting that it supported YUV 4:2:2 output, when it is actually YUV 4:2:0. Though I believe the hardware can be pushed to 4:2:2, we don't currently support that. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6717): ivtv: Initial merge of video48 yuv handling into the ↵Ian Armstrong
IVTV_IOC_DMA_FRAME framework Previously, all yuv data written to /dev/video48 had only basic support with no double buffering to avoid display tearing. With this patch, yuv frames written to video48 are now handled by the existing IVTV_IOC_DMA_FRAME framework. As such, the frames are hardware buffered to avoid tearing, and honour scaling mode & field order options. Unlike the proprietary IVTV_IOC_DMA_FRAME ioctl, all parameters are controlled by the V4L2 API. Due to mpeg & yuv output restrictions being different, their V4L2 output controls have been separated. To control the yuv output, the V4L2 calls must be done via video48. If the ivtvfb module is loaded, there will be one side effect to this merge. The yuv output window will be constrained to the visible framebuffer area. In the event that a virtual framebuffer size is being used, the limit to the output size will be the virtual dimensions, but only the portion that falls within the currently visible area of the framebuffer will be shown. Like the IVTV_IOC_DMA_FRAME ioctl, the supplied frames must be padded to 720 pixels wide. However the height must only be padded up the nearest multiple of 32. This would mean an image of 102 lines must be padded to 128. As long as the true source image size is given, the padding will not be visible in the final output. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6341): ivtv: fix resizing MPEG1 streamsHans Verkuil
Resizing an MPEG 1 stream would cut off the right half of the image due to a missing divide by 2 in VIDIOC_S_FMT. Also did some minor cleanup in this part of the code. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6109): ivtv: use new videodev2.h pixel formatsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6097): ivtv: set correct pixel format and alpha propertiesHans Verkuil
ivtv: set correct pixel format and alpha properties in VIDIOC_G_FBUF Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6093): ivtv: reorganized and cleanup ivtv structHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6092): ivtv: more cleanups, merged ivtv-audio.c and ivtv-video.c ↵Hans Verkuil
into ivtv-routing.c Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6089): ivtv: log in status if framebuffer uses YUV instead of RGBHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6087): ivtv: prevent changing VBI format while capture is in progressHans Verkuil
Changing the VBI format requires a CX2341X_ENC_INITIALIZE_INPUT firmware call. This can only be done if no capture is in progress. So return -EBUSY if the encoder is busy. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6086): ivtv: fix output mode processing: UDMA_YUV wasn't clearedHans Verkuil
- Always clear when stopping the decoder - Clear if the filehandle that is being close was used for UDMA_YUV output. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6061): ivtv: add VIDIOC_OVERLAYHans Verkuil
Add VIDIOC_OVERLAY to enable/disable the OSD. Also add the OSD state to the log status report. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6059): ivtv: log stereo/bilingual audio modesHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6056): ivtv: move serialization to the fileops levelHans Verkuil
Serialization is now done on the open/close/ioctl level and also when the read/write/poll start an encoder/decoder stream. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6055): ivtv: improve debug messagesHans Verkuil
- add FILE debug flag for open/close/read/write/poll. - show cmd for encoder/decoder command ioctl. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6045): ivtv: fix handling of INITIALIZE_INPUT fw callHans Verkuil
The CX2341X_ENC_INITIALIZE_INPUT firmware call requires careful handling, otherwise the computer can freeze or the top-third of the screen can start flickering. This patch ensures that CX2341X_ENC_INITIALIZE_INPUT is called at the right time and in the right way. In addition the stop capture handling was improved so that the last pending DMA transfer is also processed. Otherwise this would be the first data that arrived when a new capture was started which is not what you want. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5994): ivtv: make VIDIOC_INT_RESET support smarter.Hans Verkuil
Add support to optionally reset the IR and/or the video digitizer. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5992): ivtv: show card name as well in the LOG_STATUS output.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-09-14V4L/DVB (6095): ivtv: fix VIDIOC_G_ENC_INDEX flag handlingHans Verkuil
Due to a documentation bug (the type mask is 3 bits long, not 2) the wrong frame types were filled in: the B and P frame types were swapped. This bug also hid a second bug: when a capture is stopped a last entry is written into the pgm index buffer with internal type 0, denoting the end of the program. This entry wasn't ignored, instead it was accidentally returned to the caller as a P frame. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (5969): ivtv: report ivtv version in status logHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (5967): ivtv: fix VIDIOC_S_FBUF:new OSD values where never setHans Verkuil
ivtv: fix VIDIOC_S_FBUF support: new OSD values where never actually set. The values set with VIDIOC_S_FBUF were not actually used until the next VIDIOC_S_FMT. Fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5916): ivtv: fix pause/continue/play handlingHans Verkuil
Pausing a decoder followed by a Play command would do nothing. Fixed. Pausing a decoder running at non-standard speed following by a Continue would reset the speed to 100%. Fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5770): Ivtv: fix return code of VIDIOC_G/S_FBUF when no FB is presentHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-08V4L/DVB (5751): Ivtv: fix ia64 printk format warnings.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-08V4L/DVB (5732): Add ivtv CROPCAP support and fix ivtv S_CROP for video output.Hans Verkuil
The VIDIOC_CROPCAP ioctl was missing in ivtv. The handling of output video cropping was wrong. This has now been fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-22V4L/DVB (5670): Adding new fields to v4l2_pix_format broke the ABI, reverted ↵Hans Verkuil
that change Reverted the change to struct v4l2_pix_format. I completely missed that this struct was used by existing ioctls so that changing it broke the ABI. I will have to think of another way of setting the top/left coordinates but for now this change is reverted to preserve compatibility. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5560): Ivtv: fix incorrect bitwise-and for command flags.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5412): Fix VIDIOC_TRY_ENCODER_CMD and VIDEO_TRY_COMMANDHans Verkuil
VIDIOC_TRY_ENCODER_CMD did the same as VIDIOC_ENCODER_CMD, now it no longer touches the encoder. Both the encoder and decoder commands did not clear the flags field of unknown flags. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5411): Use v4l_printk_ioctl for debugHans Verkuil
Using v4l_printk_ioctl saves a lot of code duplication. Also moved a few ioctl cases to another function, improving the ioctl grouping. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5410): Add VIDIOC_G/S_PRIORITY support to ivtv.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5403): Set vsync_field correctly in ivtv.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-08 06:08:59 +0000