aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/tuner-simple.c
AgeCommit message (Collapse)Author
2007-10-09V4L/DVB (6006): tuner: move last_div to tuner-simple private dataMichael Krufky
tuner-simple is the only sub-driver that uses last_div, so we can free up two bytes of memory for all other tuners, by moving this into tuner-simple's private data area. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5978): tuner: Better tuner radio supportTrent Piepho
Add radio support for the Thomson DTT7612 tuner. This tuner uses a different 1st intermediate frequency than the other radio tuners supported (a lot of NTSC radio tuners probably need this change too). Add a new tuner-simple parameter, radio_if. It selects the 1st IF used for radio reception. The radio frequency setting code in tuner-simple now uses this field, instead of a special case select() block for each tuner with radio support. The tuner parameters for tuners that used a 33.3 MHz RIF now set radio_if to 1 in tuner-types.c. The Thomson DTT7612 gets radio_if = 2, also add has_tda9887 = 1 and fm_gain_normal = 1. Add some defines for tda9887 bits that control IF setting in radio mode. Add a new tda9887 config option, TDA9887_RIF_41_3, that selects a 41.3 MHz radio IF. Fix the way tda9887 radio options work. The driver was modifying the default radio mode config templates based on the TDA9887_XXXX flags. This means that _all_ tuners would get the same settings. If you had a one tuner than used TDA9887_GAIN_NORMAL and one that didn't, both would get the setting. Now the tda9987 driver just checks if tuner mode is radio and then applies the config settings directly to the data being sent, just like how all the TV mode settings already work. The PLL setting math is made a little more accurate. And a grammar error in a printk is fixed. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5793): Tuner: remove hardware-specific info from public headerMichael Krufky
Move internal structures and debug macros to drivers/media/video/tuner-driver.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5759): Tuner-simple: store tuning operations in tuner_operations structMichael Krufky
Create static struct tuner_operations simple_tuner_ops for tuner-simple tuning function callback pointers Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5753): Tuner: create struct tuner_operationsMichael Krufky
Move tuner callback function pointers out of struct tuner, into struct tuner_operations. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5681): Correct aliases for STD/L and STD/LcMauro Carvalho Chehab
Some macros were using very weird names, like PAL/L (this std doesn't exist). Fixing it. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-22V4L/DVB (5680): Tuner-simple.c fix suport for SECAM with FI1216MFmatthieu castet
Allow to use SECAM-BG with the FI1216MF tuner. The selection is done with the secam=B module argument. The default behaviour should be the same as before. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4935): Added the capability of selecting fm gain by tunerMauro Carvalho Chehab
Some tuners require using cGainNormal instead of cGainLow for high sensibility on FM reception. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4913): Fix broken TUNER_LG_NTSC_TAPE radio supportHans Verkuil
The TUNER_LG_NTSC_TAPE is identical in all respects to the TUNER_PHILIPS_FM1236_MK3. So use the params struct for the Philips tuner. Also add this LG_NTSC_TAPE tuner to the switches where radio specific parameters are set so it behaves like a TUNER_PHILIPS_FM1236_MK3. This change fixes the radio support for this tuner (the wrong bandswitch byte was used). Thanks to Andy Walls <cwalls@radix.net> for finding this bug. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4533): Tda9887: add configuration setting for L standard PLL gatingTrent Piepho
Add a tuner config parameter for TDA9887, default_pll_gating_18, that changes the L standard PLL gating value from 36% to 0% (datasheet says 0%, tda9887 code says 18%). Turn this on for Microtune 4049FM5, as recomended by tuner datasheet. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4498): Offset parameter permission were 0x666, instead of 0x664Mauro Carvalho Chehab
Although not dangerous, it may allow a normal user with access to a machine to untune a TV channel. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4366): Remove of couple of useless linesTrent Piepho
A buffer was set just before an if block, and then again in both branches of the if. Obvious coding error. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4314): Set the Auxiliary Byte when tuning LG H06xF in analog modeMichael Krufky
With the LG H06xF tuners, an auxiliary byte must be sent after the standard four-byte i2c sequence. The code that does this is currently in the wrong place, causing random bytes to be written to the tuner over i2c in the set_type function. This patch moves this code from set_type to default_set_tv_freq. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30V4L/DVB (4270): Add tda9887-specific tuner configurationHans Verkuil
Many tda9887 settings depend on the chosen tuner. Expand the tuner parameters to include these tda9887 settings. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (4118): Whitespace cleanupsTrent Piepho
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3419): This patch fixes Tuner TNF5335 familyMauro Carvalho Chehab
Radio now works. Tuner now supports both PAL/D and STD/MN models Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-07V4L/DVB (3278): Show debug for tuners trying to use unsupported video standardsMichael Krufky
With tuner_debug enabled, if a tuner tries to use a video standard that doesn't have a matching tuner_params defined, the IFPCoff value and tuner number will be displayed, and the default tuner_params entry will be used. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-07V4L/DVB (3277): Use default tuner_params if desired_type not availableMichael Krufky
If a given tuner definition contains more than one tuner_params array members, it will try to select the appropriate tuner_params based on the video standard in use. If there is no tuner_params defined for the current video standard, it will select the default, tuner_params[0] Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-07V4L/DVB (3271): Update tuner commentsMichael Krufky
Right now, all tuners are using the first tuner_params[] array element for analog mode. We are now ready to begin merging similar tuner definitions together, such that each tuner definition will have a tuner_params struct for each available video standard. The tuner_params[] array element will be chosen based on the video standard in use. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-07V4L/DVB (3270): Tuner_dbg will show tuner param and range selectedMichael Krufky
- tuner_dbg will show tuner param and range selected Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-07V4L/DVB (3269): Allow multiple tuner params in each tuner definitionMichael Krufky
- allow multiple tuner params in each tuner definition. - the correct tuner_params element will be chosen based on current video standard. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-07V4L/DVB (3268): Move video std detection to top of set_tv_freq functionMichael Krufky
- move video std detection to top of set_tv_freq function - we must detect video std first, so that we can choose the correct tuner_params Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-23V4L/DVB (3436): move config byte from tuner_params to tuner_range struct.Michael Krufky
- Move config byte from tuner_params to tuner_range struct. - dvb tuners must be able to set different config byte for each range. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-23V4L/DVB (3435): rename cb variable names in tuner structures for global ↵Michael Krufky
consistency - rename cb variable names in tuner structures for global consistency Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-15V4L/DVB (3384): Separate tv & radio freqs, fix cb/freq transmit order for ↵Hans Verkuil
tuners that need this. - Moved MSP_SET_MATRIX to v4l2-common.h - Fix typos and integer overflows in tea5767.c - Split old freq field into a tv_freq and a radio_freq. Prevents that a radio tuner is initialized with a tv frequency or vice versa. - When switching to radio mode initialize the tuner with the last used radio frequency (this was already done for the TV mode). As a result of these changes the tuner module now remembers the last set radio and TV frequencies, which is what you would expect to happen. - Move out of range frequencies to the closest valid frequency as per v4l2 API spec. - Fix incorrect initial radio frequency (multiplier is 16000, not 16) - Add boundary check for out of range frequencies. - Use new flag to check if the order of the CB and freq. depends on the last set frequency. That is needed for some tuners or you can get static as a result. The flag is added for those tuners where I know that the datasheet indicates that this is necessary. - For this new check use the last set div value, not the last frequency as radio frequencies are always much higher due to the 16000 multiplier. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-13V4L/DVB (3359): Redesign tuners struct for maximum flexibilityMichael Krufky
- Tunertype struct redefined to allow one or more tuner_params structs per tuner definition, one for each video standard. - Each tuner_params struct has an element containing an arbitrary amount of tuner_ranges. (this is needed for dvb tuners - to be handled later) - A tuner_range may be referenced by multiple tuner_params structs. There are many duplicates in here. Reusing tuner_range structs, rather than defining new ones for each tuner, will cut down on memory usage, and is preferred when possible. - tunertype struct contains an element, has_tda988x. We must set this for all tunertypes that contain a tda988x chip, and then we can remove this setting from the various card structs. - Improves tuners array memory usage efficiency. - Right now, all tuners are using the first tuner_params[] array element for analog mode. In the future, we will be merging similar tuner definitions together, such that each tuner definition will have a tuner_params struct for each available video standard. At that point, the tuner_params[] array element will be chosen based on the video standard in use. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-09V4L/DVB (3239): reorganize tuner-simple threshold structure.Michael Krufky
- Create an array containing frequency threshold and control byte. - allows for an arbitrary amount of frequency ranges to be set, like dvb-pll. - improves code readability. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3196): correct Thomson DTT 761x frequency rangesMichael Krufky
- Corrected Thomson DTT 7611 tuner programming, based on spec sheet - renamed to Thomson DTT 761x - applies to DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A (DTT 7610 is similar, but slightly different programming) - corrected frequency ranges for analog and digital modes Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3166): "Philips 1236D ATSC/NTSC dual in" - fix typo.Michael Krufky
- "Philips 1236D ATSC/NTSC dual in" - fix typo. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3117): Fix broken TV standard check.Hans Verkuil
- Fix incorrect matching of TV standards leading to incorrect IFPCoff values. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3084): Added a new debug msg to help identifying tuner ProblemsMauro Carvalho Chehab
- Added a new debug msg to help identifying tuner Problems Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3081): added offset parameter for adjusting tuner offset by handMauro Carvalho Chehab
- added offset parameter for adjusting tuner offset by hand Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3062): Fix wrong tuner.h define for tuner 46Hans Verkuil
- Fix wrong tuner.h define for tuner 46 (it's a Panasonic, not a Microtune). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L (1021): Tuner description now follows the same CodingStyle as the othersMauro Carvalho Chehab
- Tuner description now follows the same CodingStyle as the others Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L (0988): Tuner cleanups by removing Video IF from tuners structMauro Carvalho Chehab
- Video IF was removed from tuners struct. - Each Video standard have its own Video IF frequency, so it is related to video standard. Of course tuner also needs saw filters for IF, but this way, similar tuners can be grouped into just one entry, if they have the same cut-off freqs and the same switch config and global config. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-11-13[PATCH] v4l:: (936) Support for sabrent bt848 versionBill Pechter
Support for Sabrent bt848 version. Signed-off-by: Bill Pechter <pechter@gmail.com> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 869: iso c90 forbids mixed declarations and codeMichael Krufky
- ISO C90 forbids mixed declarations and code Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 868: added support for nxt200x based cards ati hdtv wonderKirk Lapray
- Added support for NXT200X based cards (ATI HDTV Wonder) Signed-off-by: Kirk Lapray <kirk.lapray@gmail.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 800: whitespace cleanupsMauro Carvalho Chehab
- Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 712: added analog support for ati hdtv wonderKirk Lapray
- Added analog support for ATI HDTV Wonder Signed-off-by: Kirk Lapray <kirk.lapray@gmail.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 685: update the tveeprom tuner list with the tunerHans Verkuil
- Update the tveeprom tuner list with the tuner Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 655: added support for the philips td1316 tunerHartmut Hackmann
- Added support for the Philips TD1316 tuner Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 644: lower switch from vhf lo to vhf hi for philips 1216me mk3Nickolay V. Shmyrev
- Lower switch from VHF_LO to VHF_HI for Philips 1216ME MK3 Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] v4l: the Microtune 4049FM5 uses an IF frequency of 33.3 MHz for FM ↵Mauro Carvalho Chehab
radio. - The Microtune 4049FM5 uses an IF frequency of 33.3 MHz for FM radio. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] v4l: change LG TDVS H062F from NTSC to ATSCMauro Carvalho Chehab
- Change LG TDVS H062F from NTSC to ATSC. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] v4l: normalize whitespace and comments in tuner listsMauro Carvalho Chehab
- normalize whitespace and comments in tuner lists Signed-off-by: Philip Rowlands <phr@doc.ic.ac.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] v4l: correct LG NTSC TALN mini tuner takeoverMauro Carvalho Chehab
- correct LG NTSC TALN mini tuner takeover as far we can empirically determine for now. Signed-off-by: Hermann Pitton <hermann.pitton@onlinehome.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] v4l: common part Updates and tuner additionsMauro Carvalho Chehab
- Remove $Id CVS logs for V4L files - Included newer cards. - Added a new NEC protocol for ir based on pulse distance. - Enable ATSC support for DViCO FusionHDTV5 Gold. - Added tuner LG NTSC (TALN mini series). - Fixed tea5767 autodetection. - Resolve more tuner types. - Commented debug function removed from mainstream. - Remove comments from mainstream. Still on development tree. - linux/version dependencies removed. - BTSC Lang1 now is set to auto_stereo mode. - New tuner standby API. - i2c-core.c uses hexadecimal for the i2c address, so it should stay consistent. Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Mac Michaels <wmichaels1@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Hermann Pitton <hermann.pitton@onlinehome.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01[PATCH] V4L: Miscellaneous fixesMauro Carvalho Chehab
- Fixed some bttv card numbers. - BTTV and SAA7134 version numbers incremented to reflect changes. - pci_dma_supported() is called after pci_set_dma_mask() which already did check that for us. This patch removes the unneeded call to pci_dma_supported() at bttv-driver.c - Ensure a sufficient I2C bus idle time between 2 messages for saa7134-i2c.c - It is important to write at first to MO_GP3_IO for cx88-tvaudio.c - Use try_to_freeze() instead of refrigerator at msp3400.c - Recognizing the MFPE05-2 Tuner at tveeprom.c - Add new parameter to help identify radio chipsets at tuner module: show_i2c=1 will show 16 reading bytes from detected tuners. - BTTV does generate some Unimplemented IOCTL log at tuner module: 0x40046d11(dir=1,tp=0x6d,nr=17,sz=4) means that it is sending MSP3400 calls to non-msp3400 tuners. Warning eliminated. VIDIOSAUDIO is also called, so debug messages updated. It is still requiring IOCTL implementation. - Added two more tuners. - Add support for the SVideo input on the GDI Black Gold. Signed-off-by: Peter Missel <peter.missel@onlinehome.de> Signed-off-by: Graham Bevan <graham.bevan@ntlworld.com> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de> Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12[PATCH] v4l: I2C TunerMauro Carvalho Chehab
- Fixed a trouble on tuner-core that generates erros on computers with more than one TV card. - Rename tuner structures fields. - Tail spaces removed. - I2C cleanups and converged to a basic reference structure. - Removed unused structures. - Fix setting frequency on tda8290. - Added code for TEA5767 autodetection. - Standby mode support implemented. It is used to disable a non used tuner. Currenlty implemented on tea5767. - New macro: set_type disables other tuner when changing mode. - Some cleanups. - Use 50 kHz step when tunning radio for most tuners to improve precision. Signed-off-by: Fabien Perrot <perrot1983@yahoo.fr> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-By: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 14:22:57 +0000