aboutsummaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2008-11-24V4L/DVB (9689): gspca: Memory leak when disconnect while streaming.Jean-Francois Moine
As a side effect, the sd routine stop0 is called on disconnect. This permits the subdriver to free its resources. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-20V4L/DVB (9668): em28xx: fix a race condition with haldMauro Carvalho Chehab
Newer versions of hald tries to open it to call QUERYCAP. Due to the lack of a proper locking, it is possible to open the device before it finishes initialization. This patch adds a lock to avoid this risk, and to protect the list of em28xx devices. While here, remove the uneeded BKL lock. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-20V4L/DVB (9664): af9015: don't reconnect device in USB-busJose Alberto Reguero
Don't reconnect device in the USB-bus. Reconnect command was not executed every time by device firmware and that causes harm. Reconnection is not needed so remove it. Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-20V4L/DVB (9647): em28xx: void having two concurrent control URB'sMauro Carvalho Chehab
Now that we have a polling task for IR, there's a race condition, since IR can be polling while other operations are being doing. Also, we are now sharing the same urb_buf for both read and write control urb operations. So, we need a mutex. Thanks to Davin Heitmueller <devin.heitmueller@gmail.com> for warning me. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-20V4L/DVB (9646): em28xx: avoid allocating/dealocating memory on every control urbMauro Carvalho Chehab
Before this patch, every register setup on em28xx were dynamically allocating a temporary buffer for control URB's to be handled. To avoid this ping-pong, use, instead a pre-allocated buffer. Also, be sure that read control URB's also use the buffer, instead of relying on a stack buffer. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-20V4L/DVB (9645): em28xx: Avoid memory leaks if registration failsMauro Carvalho Chehab
em28xx_init_dev() has some error conditions that are not properly de-allocating dev var, nor freeing the device number for a future usage. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9639): Make dib0700 remote control support work with firmware v1.20Devin Heitmueller
The format for reading the IR controller changed in firmware 1.20. It now provides the events on bulk endpoint 1 instead of using a control request. Support the new format, providing backward compatibility for users who might be using older firmware. Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing the required information on how the version 1.20 firmware works. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9635): v4l: s2255drv fix firmware test on big-endianHarvey Harrison
Noticed by sparse: drivers/media/video/s2255drv.c:2531:6: warning: restricted __le32 degrades to integer Cc: Dean Anderson <dean@sensoray.com> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9634): Make sure the i2c gate is open before powering down tunerDevin Heitmueller
It is not safe to assume that the i2c gate will be open before issuing the command to power down the tuner. In fact, many demods only open the gate long enough to issue the tuning command. This fix allows power management to work properly for those tuners behind an i2c gate (in my case the problem was with the HVR-950Q) Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9632): make em28xx aux audio input workDevin Heitmueller
The attached patch makes the em28xx auxillary audio input work. Tested with the HVR-950. em28xx: make auxillary audio input work The tuner audio input was working but the aux input wasn't. Tested with the HVR-950. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9631): Make s2api work for ATSC supportDevin Heitmueller
ATSC should be considered a legacy delivery system, or else fields such as p->u.vsb.modulation do not get populated (resulting in set_frontend failures) Cc: Steven Toth <stoth@linuxtv.org> Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9627): em28xx: Avoid i2c register error for boards without eepromMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9608): Fix section mismatch warning for dm1105 during makeIgor M. Liplianin
-- Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9605): usb-urb: fix memory leakDouglas Schilling Landgraf
Free allocated memory Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9604): ttusb_dec: fix memory leakDouglas Schilling Landgraf
Free allocated memory Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9603): dvb-ttusb-budget: Add validation for ttusb_alloc_iso_urbsDouglas Schilling Landgraf
Added validation for ttusb_alloc_iso_urbs Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9602): dvb-ttusb-budget: Add NULL pointer validationDouglas Schilling Landgraf
Added validation for NULL pointer Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9601): ttusb_dec: Add NULL pointer validationDouglas Schilling Landgraf
Added validation for NULL pointer Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9624): CVE-2008-5033: fix OOPS on tvaudio when controlling bass/trebleMauro Carvalho Chehab
This bug were supposed to be fixed by 5ba2f67afb02c5302b2898949ed6fc3b3d37dcf1, where a call to NULL happens. Not all tvaudio chips allow controlling bass/treble. So, the driver has a table with a flag to indicate if the chip does support it. Unfortunately, the handling of this logic were broken for a very long time (probably since the first module version). Due to that, an OOPS were generated for devices that don't support bass/treble. This were the resulting OOPS message before the patch, with debug messages enabled: tvaudio' 1-005b: VIDIOC_S_CTRL BUG: unable to handle kernel NULL pointer dereference at 00000000 IP: [<00000000>] *pde = 22fda067 *pte = 00000000 Oops: 0000 [#1] SMP Modules linked in: snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_hwdep snd soundcore tuner_simple tuner_types tea5767 tuner tvaudio bttv bridgebnep rfcomm l2cap bluetooth it87 hwmon_vid hwmon fuse sunrpc ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 dm_mirrordm_multipath dm_mod configfs videodev v4l1_compat ir_common 8139cp compat_ioctl32 v4l2_common 8139too videobuf_dma_sg videobuf_core mii btcx_risc tveeprom i915 button snd_page_alloc serio_raw drm pcspkr i2c_algo_bit i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support sr_mod cdrom sg ata_generic pata_acpi ata_piix libata sd_mod scsi_mod ext3 jbdmbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: soundcore] Pid: 15413, comm: qv4l2 Not tainted (2.6.25.14-108.fc9.i686 #1) EIP: 0060:[<00000000>] EFLAGS: 00210246 CPU: 0 EIP is at 0x0 EAX: 00008000 EBX: ebd21600 ECX: e2fd9ec4 EDX: 00200046 ESI: f8c0f0c4 EDI: f8c0f0c4 EBP: e2fd9d50 ESP: e2fd9d2c DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process qv4l2 (pid: 15413, ti=e2fd9000 task=ebe44000 task.ti=e2fd9000) Stack: f8c0c6ae e2ff2a00 00000d00 e2fd9ec4 ebc4e000 e2fd9d5c f8c0c448 00000000 f899c12a e2fd9d5c f899c154 e2fd9d68 e2fd9d80 c0560185 e2fd9d88 f8f3e1d8 f8f3e1dc ebc4e034 f8f3e18c e2fd9ec4 00000000 e2fd9d90 f899c286 c008561c Call Trace: [<f8c0c6ae>] ? chip_command+0x266/0x4b6 [tvaudio] [<f8c0c448>] ? chip_command+0x0/0x4b6 [tvaudio] [<f899c12a>] ? i2c_cmd+0x0/0x2f [i2c_core] [<f899c154>] ? i2c_cmd+0x2a/0x2f [i2c_core] [<c0560185>] ? device_for_each_child+0x21/0x49 [<f899c286>] ? i2c_clients_command+0x1c/0x1e [i2c_core] [<f8f283d8>] ? bttv_call_i2c_clients+0x14/0x16 [bttv] [<f8f23601>] ? bttv_s_ctrl+0x1bc/0x313 [bttv] [<f8f23445>] ? bttv_s_ctrl+0x0/0x313 [bttv] [<f8b6096d>] ? __video_do_ioctl+0x1f84/0x3726 [videodev] [<c05abb4e>] ? sock_aio_write+0x100/0x10d [<c041b23e>] ? kmap_atomic_prot+0x1dd/0x1df [<c043a0c9>] ? enqueue_hrtimer+0xc2/0xcd [<c04f4fa4>] ? copy_from_user+0x39/0x121 [<f8b622b9>] ? __video_ioctl2+0x1aa/0x24a [videodev] [<c04054fd>] ? do_notify_resume+0x768/0x795 [<c043c0f7>] ? getnstimeofday+0x34/0xd1 [<c0437b77>] ? autoremove_wake_function+0x0/0x33 [<f8b62368>] ? video_ioctl2+0xf/0x13 [videodev] [<c048c6f0>] ? vfs_ioctl+0x50/0x69 [<c048c942>] ? do_vfs_ioctl+0x239/0x24c [<c048c995>] ? sys_ioctl+0x40/0x5b [<c0405bf2>] ? syscall_call+0x7/0xb [<c0620000>] ? cpuid4_cache_sysfs_exit+0x3d/0x69 ======================= Code: Bad EIP value. EIP: [<00000000>] 0x0 SS:ESP 0068:e2fd9d2c Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9623): tvaudio: Improve debug msg by printing something more humanMauro Carvalho Chehab
Before the patch, the used ioctl were printed as an hexadecimal code, hard to be understand without consulting the way _IO macros work. Instead, use the V4L default handler for printing such errors into a way that would be easier to understand. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9622): tvaudio: Improve comments and remove a unneeded prototypeMauro Carvalho Chehab
Some comments are not clear enough. Improve it to allow a better understanding of the driver behavior. While there, remove an unneeded struct prototype. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9621): Avoid writing outside shadow.bytes[] arrayMauro Carvalho Chehab
There were no check about the limits of shadow.bytes array. This offers a risk of writing values outside the limits, overriding other data areas. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9620): tvaudio: use a direct reference for chip descriptionMauro Carvalho Chehab
Instead of storing the pointer for the proper entry at chip description table, the driver were storing an indirect reference, by using an index. Better to reference directly the data. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9619): tvaudio: update initial commentsMauro Carvalho Chehab
A driver used on several bttv boards since 2000 is not experimental anymore ;) Remove it from the comments. While there, update copyrights addind a quick note about the "recent" updates since 2005. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9618): tvaudio: add additional logic to avoid OOPSMauro Carvalho Chehab
This patch checks for volume, bass, treble, set mode and get mode callbacks before actually enabling the code that would use them. Instead of aborting the driver for load, this patch will allow it to load with a reduced number of functionatities. This prevents OOPS if some board entry is missing a needed callback. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9617): tvtime: remove generic_checkmode callbackMauro Carvalho Chehab
generic_checkmode() were called, via a callback, for some tvaudio chips. There's just one callback code used on all those boards. So, it makes no sense on keeping this as a callback. Since there were some OOPS reported on tvaudio on kerneloops.org, this patch removes this callback, adding the code at the only place were it is called: inside chip_tread. A flag were added to indicate the need for a kernel thread to set stereo mode on cards that needs it. Using this more direct approach simplifies the code, making it more robust against human errors. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9616): tvaudio: cleanup - group all callbacks togetherMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9615): tvaudio: instead of using a magic number, use ARRAY_SIZEMauro Carvalho Chehab
Also, the default standard is the first one. So, fix the comment at the array. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9613): tvaudio: fix a memory leakMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9516): cx18: Move DVB buffer transfer handling from irq handler to ↵Andy Walls
work_queue cx18: Move DVB buffer transfer handling from irq handler to work_queue thread. In order to properly lock the epu2cpu mailbox for driver to CX23418 commands, the DVB/TS buffer handling needs to be moved from the IRQ handler and IRQ context to a work queue. This work_queue implmentation is strikingly similar to the ivtv implementation - for better or worse. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9557): gspca: Small changes for the sensor HV7131B in zc3xx.Jean-Francois Moine
- touch only one register for brightness change - no quality control - don't probe again at streamon time. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9556): gspca: Bad init sequence for sensor HV7131B in zc3xx.Jean-Francois Moine
This patch fixes the H flip and the R & B color inversion of mode 320x240. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9549): gspca: Fix a typo in one of gspca chips name.Krzysztof Helt
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9515): cx18: Use correct Mailbox IRQ Ack values and misc IRQ ↵Andy Walls
handling cleanup cx18: Use correct Mailbox IRQ Ack values and misc IRQ handling cleanup. The SCB field definitions for Ack IRQ's for mailboxes were inconsistent with the bitmasks being loaded into those SCB fields and the SW2 Ack IRQ handling logic. Renamed fields in SCB to make things consistent and did misc IRQ handling cleanups: removing legacy ivtv dma_reg_lock, HPU IRQ flags, etc. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9493): kconfig patchFrederic CAND
Ok I made a patch that converts gspca kconfig file to a more standard= one, with tabs + 2 white spaces, so that if a warning is added it still compiles please find it attached Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9527): af9015: fix compile warningsAntti Palosaari
- use static to avoid compile warnings Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9524): af9013: fix bug in status readingroel kluin
- ! has a higher precedence than & Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9511): cx18: Mark CX18_CPU_DE_RELEASE_MDL as a slow API callAndy Walls
cx18: Mark CX18_CPU_DE_RELEASE_MDL as a slow API call. Give the encoder time to complete the MDL release before destroying the encoder internal task. This avoids an encoder lockup on the next digital capture and error messages about buffers being returned for an inactive encoder task handle. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9510): cx18: Fix write retries for registers that always change - ↵Andy Walls
part 2. cx18: Fix write retries for registers that always change - part 2. Some registers, especially interrupt related ones, will never read back the value just written. Modified interrupt register readback checks to make sure the intended effect was achieved. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9506): ivtv/cx18: fix test whether modules should be loaded or not.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9499): cx88-mpeg: final fix for analogue only compilation + ↵Darron Broad
de-alloc fix Final fix for when analogue only is selected for compilation (ie, !CX88_DVB) This tidies up previous fix and adds missing de-alloc memory leak on fault (eg, if fe1 fails to alloc where fe0 was allocated). Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9496): cx88-blackbird: bugfix: cx88-blackbird-mpeg-usersFrederic CAND
Allows multiple access to the mpeg device Signed-off-by: Frederic CAND <frederic.cand@anevia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9495): cx88-blackbird: bugfix: cx88-blackbird-poll-fixFrederic CAND
Starts encoder not only on a read call but also on a poll command. Signed-off-by: Frederic CAND <frederic.cand@anevia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9494): anysee: initialize anysee_usb_mutex staticallyAkinobu Mita
anysee_usb_mutex is initialized at every time the anysee device is probed. If the second anysee device is probed while anysee_usb_mutex is locked by the first anysee device, the mutex is broken. This patch fixes by initialize anysee_usb_mutex statically rather than initialize at probe time. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9492): unplug oops from dvb_frontend_init...Daniel J Blueman
When inadvertently hot-unplugging a WT-220U USB DVB-T receiver with 2.6.24, I was met with an oops [1]. The problem is relevant to 2.6.25/26-rc also. dvb_frontend_init() was called either from re-creation of the kdvb-fe0 thread - seems unlikely, or someone called dvb_frontend_reinitialise(), causing this path in the thread - really unlikely, as I can't find any call-site for it. Either way, quite a number of drivers call dvb_usb_generic_rw() [2] without checking the validity of the relevant member in the dvb_usb_device struct - which had changed. Having dvb_usb_generic_rw() sanity-check and fail (rather than loading from 0x120) seems reasonable defensive programming [3], in light of it being called in this way. The problem with this, is that drivers don't check the return code of the init call [4]. Does it make sense to cook a patch which allows the failure to be propagated back up, or am I missing something else? Thanks, Daniel <whoops, hot unplug> [83711.538485] dvb-usb: bulk message failed: -71 (1/0) [83711.538875] dvb-usb: bulk message failed: -71 (1/0) [83711.538899] usb 7-5: USB disconnect, address 3 [83711.538905] dvb-usb: bulk message failed: -22 (1/0) [83711.538924] dvb-usb: bulk message failed: -22 (1/0) [83711.538943] dvb-usb: bulk message failed: -22 (1/0) [83711.588979] dvb-usb: bulk message failed: -22 (1/0) [83711.589031] dvb-usb: bulk message failed: -22 (1/0) [83711.589078] dvb-usb: bulk message failed: -22 (1/0) [83711.589122] dvb-usb: bulk message failed: -22 (1/0) [83711.589167] dvb-usb: bulk message failed: -22 (1/0) [83711.639233] dvb-usb: bulk message failed: -22 (1/0) [83711.639282] dvb-usb: bulk message failed: -22 (1/0) [83711.639330] dvb-usb: bulk message failed: -22 (1/0) [83711.639374] dvb-usb: bulk message failed: -22 (1/0) [83711.639421] dvb-usb: bulk message failed: -22 (1/0) [83711.658391] dvb-usb: bulk message failed: -22 (1/0) [83768.174281] dvb-usb: bulk message failed: -22 (2/-32512) [83768.174350] Unable to handle kernel NULL pointer dereference<6>dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully deinitialized and disconnected. [83768.174459] at 0000000000000120 RIP: [83768.174459] [<ffffffff88339b4f>] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.174580] PGD 0 [83768.174643] Oops: 0000 [1] SMP [83768.174723] CPU 0 [83768.174782] Modules linked in: nfsd auth_rpcgss exportfs nfs lockd nfs_acl sunrpc af_packet xt_length ipt_tos ipt_TOS xt_CLASSIFY sch_sfq sch_htb ipt_MASQUERADE ipt_REDIRECT xt_limit xt_state xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack iptable_mangle iptable_filter ip_tables x_tables xfs sbp2 parport_pc lp parport loop ftdi_sio usbserial evdev dvb_usb_dtt200u dvb_usb dvb_core i2c_core sky2 iTCO_wdt iTCO_vendor_support snd_hda_intel shpchp snd_pcm snd_timer snd_page_alloc snd_hwdep snd pci_hotplug soundcore ipv6 button intel_agp ext3 jbd mbcache sg sd_mod ata_generic pata_acpi ahci ata_piix libata scsi_mod ohci1394 ieee1394 ehci_hcd uhci_hcd usbcore e1000 thermal processor fan fbcon tileblit font bitblit softcursor fuse [83768.176968] Pid: 5732, comm: kdvb-fe-0 Not tainted 2.6.24-16-server #1 [83768.177009] RIP: 0010:[<ffffffff88339b4f>] [<ffffffff88339b4f>] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.177096] RSP: 0018:ffff810021939df0 EFLAGS: 00010286 [83768.177138] RAX: ffff81003bc7cc00 RBX: 0000000000000001 RCX: 0000000000000000 [83768.177181] RDX: 0000000000000001 RSI: ffff810021939e67 RDI: 0000000000000000 [83768.177223] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [83768.177267] R10: ffff810001009880 R11: 0000000000000001 R12: ffff81003c10b400 [83768.177311] R13: ffff81003c10b5b0 R14: ffff810021939ec0 R15: 0000000000000000 [83768.177354] FS: 0000000000000000(0000) GS:ffffffff805c3000(0000) knlGS:0000000000000000 [83768.177409] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [83768.177449] CR2: 0000000000000120 CR3: 0000000000201000 CR4: 00000000000006e0 [83768.177491] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [83768.177534] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [83768.177576] Process kdvb-fe-0 (pid: 5732, threadinfo ffff810021938000, task ffff81003bd1b7a0) [83768.177629] Stack: ffff81003e9b6828 0000000000000000 ffff8100378369f8 0000000000000000 [83768.177800] ffff81003bd1b7a0 ffff810037836d48 ffff81003bc7cc30 ffff81003c10b400 [83768.177943] ffff81003c10b5b0 ffff810021939ec0 ffff81003c10b5e0 ffffffff88342452 [83768.178054] Call Trace: [83768.178130] [<ffffffff88342452>] :dvb_usb_dtt200u:dtt200u_fe_init+0x22/0x30 [83768.178178] [<ffffffff88339f6a>] :dvb_usb:dvb_usb_fe_wakeup+0x3a/0x50 [83768.178229] [<ffffffff88325c41>] :dvb_core:dvb_frontend_init+0x21/0x70 [83768.178278] [<ffffffff8832746b>] :dvb_core:dvb_frontend_thread+0x8b/0x370 [83768.178329] [<ffffffff883273e0>] :dvb_core:dvb_frontend_thread+0x0/0x370 [83768.178382] [<ffffffff80253e3b>] kthread+0x4b/0x80 [83768.178427] [<ffffffff8020d198>] child_rip+0xa/0x12 [83768.178473] [<ffffffff80253df0>] kthread+0x0/0x80 [83768.178514] [<ffffffff8020d18e>] child_rip+0x0/0x12 [83768.178557] [83768.178594] [83768.178594] Code: 44 8b 87 20 01 00 00 49 89 f4 45 89 ce 45 85 c0 0f 84 ad 00 [83768.179167] RIP [<ffffffff88339b4f>] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.179234] RSP <ffff810021939df0> [83768.179271] CR2: 0000000000000120 [83768.179419] ---[ end trace dba8483163cb1700 ]--- Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9486): ivtv/ivtvfb: no longer experimentalHans Verkuil
Remove the EXPERIMENTAL tag. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9485): ivtv: remove incorrect V4L1 & tvaudio dependencyHans Verkuil
ivtv used tvaudio in the past and at the time tvaudio required V4L1. Since tvaudio is no longer dependent on V4L1 and since ivtv actually no longer uses tvaudio at all, this is no removed from Kconfig. Without this patch ivtv won't be build if V4L1 is disabled. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9482): Documentation, especially regarding audio and informational ↵Tobias Lorenz
links This patch adds a recommendation to select SND_USB_AUDIO for listing and adds a documentation file for si470x. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9475): cx18: Disable write retries for registers that always change ↵Andy Walls
- part 1. cx18: Disable write retries for registers that always change - part 1. Interrupt related registers will likely not read back the value we just wrote. Disable retries for these registers for now to avoid accidently discarding interrupts. More intelligent read back verification criteria are needed for these and other registers (e.g. GPIO line registers), which will be addressed in subsequent changes. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9372): Minor fixes to the saa7110 driverJean Delvare
* Apparently the author of the saa7110 driver was confused by the number of outputs returned by DECODER_GET_CAPABILITIES. Of course a decoder chip has no analog ouputs, but it must have at least one digital output. * Fix an off-by-one error when checking the input value of DECODER_SET_INPUT. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 04:01:22 +0000