aboutsummaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2008-10-12V4L/DVB (8900): pvrusb2: Implement cropping pass throughMike Isely
This builds upon the previous pvrusb2 change to more formally implement full cropping support. This enables access from the driver's V4L interface, and enables access to full capabilities from sysfs as well. Note that this is only effective when in analog mode. It also will only work when the underlying digitizer's driver (saa7115 or cx25840 depending on the hardware) also implements the appropriate functions. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8899): pvrusb2: Implement default value retrieval in sysfs interfaceMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8898): pvrusb2: Be able to programmatically retrieve a control's ↵Mike Isely
default value The pvrusb2 control mechanism up until now has used a constant int to hold a control's default value. This change makes it possible to retrieve the control's default through some other means, e.g. as a result of a query from lower level software. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8897): pvrusb2: Mark crop window size change as being disruptive to ↵Mike Isely
the encoder Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8896): pvrusb2: Implement crop supportvdb128@picaros.org
Implement pvrusb2 driver plumbing to support cropping. Submitted by a pvrusb2 user. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8895): pvrusb2: Fail gracefully if an alien USB ID is usedMike Isely
The driver includes an internal table specifying additional information on a per device-type basis. This works great until somebody tries to run-time associate another USB ID with the driver. This change should hopefully allow the driver to fail gracefully under such a circumstance. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8894): pvrusb2: Remove BKLMike Isely
The earlier change from Hans Verkuil that pushed the BKL from video_open() down into the drivers should be unneeded for the pvrusb2 driver. This driver's implementation for open already protects its internal structures through other means, thus the BKL is not required. This change reverses Hans' previous change, for the pvrusb2 driver. It probably would have been a good idea for Hans to previously have asked for my ack before committing his change. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8893): pvrusb2: Add comment elaborating on direct use of swab32()Mike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8890): budget: Add callback to load firmware for the TDHD1 tunerOliver Endriss
Supply callback to load firmware for the TDHD1 tuner (using request_firmware). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8889): dvb-ttpci: Support full-ts hardware modificationOliver Endriss
Add support for the 'full-ts' hardware modification. On full-featured cards the data throughput is limited by the hardware design. The full-ts mod removes this bottleneck, i.e. the card is able to deliver the complete transport stream of a transponder. For details see http://www.escape-edv.de/endriss/dvb-full-ts-mod Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8888): budget: Support Activy DVB-T with TDHD1 tunerOliver Endriss
Support Fujitsu-Siemens Activy DVB-T card rev AL (ALPS TDHD1-204A tuner). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8559): replace __FUNCTION__ with __func__Alexander Beregalov
v4l: replace __FUNCTION__ with __func__ Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8879): bttv: Don't unmask VPRES interruptJean Delvare
When the input is set to tuner and no antenna is connected, the BT848 can flood VPRES interrupts. So we don't want to enable this type of interrupts when the input it set to tuner. As we don't do anything when receiving such an interrupt anyway, the easiest fix is to simply not unmask this specific interrupt. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8866): Add dummy FE to the Kconfig-file and fix itPatrick Boettcher
Reactivated dummy frontend driver which is extremely useful for debugging. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8857): v4l2-dev: replace panic with BUGHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8856): v4l: fix assorted compile warnings/errorsHans Verkuil
BIT define conflicts on kernels < 2.6.24, byteorder/swab.h doesn't need to be included at all. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8852): v4l2: use register_chrdev_region instead of register_chrdevHans Verkuil
Replace the old register_chrdev with the more flexible register_chrdev_region. Ensure that the release() is called when the very last chardev usage was released, and not when the sysfs devices were removed. This should simplify hotpluggable drivers considerably. Tested-by: Mike Isely <isely@isely.net> Tested-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: David Ellingsworth <david@identd.dyndns.org> Reviewed-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8850): bt856: fix define conflictHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8847): uvcvideo: Add support for a Bison Electronics webcam found ↵Laurent Pinchart
in the Fujitsu Amilo SI2636. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8846): uvcvideo: Supress spurious "EOF in empty payload" trace messageLaurent Pinchart
Pass the payload size instead of the header size to uvc_video_decode_end() to avoid generating an extra trace message for each frame. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8845): s2255drv: adds JPEG compression quality controlDean Anderson
adds VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP ioctls for controlling JPEG compression quality. Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8838): CRED: Wrap task credential accesses in video input driversDavid Howells
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8807): Add DVB support for the Leadtek Winfast PxDVR3200 HSteven Toth
This patch is on behalf of Stephen Backway <stev391@email.com>, and represents two patches I received (and some subsequent whitespace cleanup I had due to how I pulled the patches). From the original author: a) Add DVB support for the Leadtek Winfast PxDVR3200 H. b) The tuner callback previously checked the command 3 times: 1) To see if it was the XC2028_RESET_CLK 2) To see if it was not the XC2028_RESET_TUNER 3) To see if it was the XC2028_RESET_TUNER This patch removes the third check. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Stephen Backway <stev391@email.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8800): [v4l-dvb-maintainer] [PATCH] v4l: mt9m111.c make function staticHarvey Harrison
drivers/media/video/mt9m111.c:758:5: warning: symbol 'mt9m111_restore_state' was not declared. Should it be static? New warning in next-20080825 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8797): A simple state machine was added to saa7134_ts.Dmitry Belimov
A simple state machine was added to saa7134_ts. It has three states: SAA7134_TS_STOPPED SAA7134_TS_BUFF_DONE SAA7134_TS_STARTED When buffer_setup is run we start the TS initialization: set SAA7134_TS_STOPPED. When all buffers are prepared we write data into DMA register and set SAA7134_TS_BUFF_DONE. When the first buffer is active start TS and set SAA7134_TS_STARTED. When ts_release is called stop TS and set SAA7134_TS_STOPPED. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8796): saa7134-empress: remove incorrect IRQ defines for TSDmitry Belimov
SAA7134_IRQ1_INTE_RA2_3 and SAA7134_IRQ1_INTE_RA2_2 are used for planar video, not for TS. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8795): saa7134-empress: insert leading null bytes for Beholder M6 ↵Dmitry Belimov
empress cards Additional code to improve the init sequence and add board type tests were done by Hans Verkuil. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8791): v4l2-dev: do not clear the driver_data fieldHans Verkuil
The driver_data field of the device structure was zeroed, thus losing this information. Many drivers set this up before calling video_device_register, so we have to ensure that it isn't lost. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8788): v4l: replace video_get_drvdata(video_devdata(filp)) with ↵Hans Verkuil
video_drvdata(filp) Use the new video_drvdata(filp) function where it is safe to do so. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8787): v4l2-dev: cleanups and add video_drvdata helper functionHans Verkuil
Cleanup v4l2-dev.[ch], add/improve comments and add a new helper function: video_drvdata() that can get the private driver data from a file struct. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8786): v4l2: remove the priv field, use dev_get_drvdata insteadHans Verkuil
Remove the priv field and let video_get/set_drvdata use dev_get_drvdata and dev_set_drvdata instead. Convert all drivers that still used priv directly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8784): v4l2-dev: make the video_device's release callback mandatoryHans Verkuil
Now that all drivers set the release callback in the video_device struct we can put in a BUG_ON in video_register_device to ensure that the callback is always there. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8783): v4l: add all missing video_device release callbacksHans Verkuil
All drivers that call video_device_register where checked to see if they set the release callback of struct video_device. Where that callback was missing it was added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8782): v4l2-dev: add video_device_release_emptyHans Verkuil
Add a second release function: video_device_release_empty It can be used by drivers that have statically allocated video_device structs. Its use usually, but not always, indicates laziness on the part of the driver programmer. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8781): v4l2-dev: remove obsolete video_exclusive_open/releaseHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8780): v4l: replace the last uses of video_exclusive_open/releaseHans Verkuil
Handle the video_exclusive_open/release functionality inside the driver. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8776): radio: replace video_exclusive_open/releaseHans Verkuil
Move the video_exclusive_open/release functionality into the driver itself. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8774): cx18: Have CX23418 release buffers at end of capture.Andy Walls
cx18: Have CX23418 release buffers at end of capture. The CX23418 reuses task handles so we need to have it release the buffers associated with a task handle at the end of a capture. If we don't, buffer ids used for one type of stream in the driver (MPEG, TS, PCM), could be used for another type of stream by the CX23418, if a previously used handle is assigned to a different type of stream. The driver would drop valid buffers when this happened. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8773): cx18: Fix cx18_find_handle() and add error checkingAndy Walls
cx18: Fix cx18_find_handle() and add error checking. cx18_find_handle() did not find a good task handle and would use the invalid task handle under common conditions. Added a define for the invalid task handle and added error checking as well. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8772): cx18: Convert cx18_queue buffers member to atomic_tAndy Walls
cx18: Convert cx18_queue buffers member to atomic_t. This allows safe concurrent access to check if a queue has data without having to acquire the queue spinlock. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8771): cx18: Remove redundant struct cx18_queue length member.Andy Walls
cx18: Remove redundant struct cx18_queue length member. It can be trivially computed from queue->buffers * stream->buf_size, if ever really needed. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8770): cx18: get rid of ununsed buffers stolen fieldAndy Walls
cx18: get rid of ununsed buffers stolen field. It's an unused holdover from ivtv. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8754): uvcvideo: Implement the USB power management reset_resume ↵Laurent Pinchart
method. When a suspended device has been reset instead of being resumed, USB core calls the reset_resume method if available instead of unbinding and rebinding the device. This patch implements reset_resume by reusing the current resume implementation and simplifies the resume method by skipping the controls restore stage. Resuming from autosuspend should be faster. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8752): s2255drv: firmware improvement patchDean Anderson
Fix for reloading firmware when removing and reloading driver Handshaking for firmware loading and changing modes. Removes the restriction of one user per channel at a time. JPEG capture mode added. Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8750): V4L: check inval in video_register_device_index()Henrik Kretzschmar
Better check the video_device pointer before using it. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8748): V4L: fix return value of meye probe callbackHenrik Kretzschmar
The return vaule of the probe function should return -ENOMEM instead of -EBUSY if video_device_alloc() fails. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8746): v4l-dvb: fix compile warnings.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8745): v4l2: fix a bunch of compile warnings.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8742): pvrusb2: use proper byteorder interfaceHarvey Harrison
___swab32 is an internal detail of the implementation. Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8739): dtv5100: remove prohibited space...Antoine Jacquet
Signed-off-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 12:32:00 +0000