aboutsummaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2006-09-27USB: Dealias -110 code (more complete)Pete Zaitcev
The purpose of this patch is to split off the case when a device does not reply on the lower level (which is reported by HC hardware), and a case when the device accepted the request, but does not reply at upper level. This redefinition allows to diagnose issues easier, without asking the user if the -110 happened "immediately". The usbmon splits such cases already thanks to its timestamp, but it's not always available. I adjusted all drivers which I found affected (by searching for "urb"). Out of tree drivers may suffer a little bit, but I do not expect much breakage. At worst they may print a few messages. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c-algo-bit: Discard the mdelay data struct memberJean Delvare
i2c-algo-bit: Discard the mdelay data struct member The i2c_algo_bit_data structure has an mdelay member, which is not used by the algorithm code (the code has always been ifdef'd out.) Let's discard it to save some code and memory. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-25fix broken/dubious driver suspend() methodsDavid Brownell
Small driver suspend() fixes in preparation for the PRETHAW events: - Only compare message events for equality against PM_EVENT_* codes; not against integers, or using greater/less-than comparisons. (PM_EVENT_* should really become a __bitwise thing.) - Explicitly test for SUSPEND events (rather than not-something-else) before suspending devices. - Removes more of the confusion between a pm_message_t (wraps event code) and a "state" ... suspend() originally took a target system state. These updates are correct and appropriate even without new PM_EVENT codes. benh: "I think in the Mesh case, we should handle the freeze case as well or we might get wild DMA." Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Greg KH <greg@kroah.com> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-25[PATCH] VIDIOC_ENUMSTD bugJonathan Corbet
The v4l2 API documentation for VIDIOC_ENUMSTD says: To enumerate all standards applications shall begin at index zero, incrementing by one until the driver returns EINVAL. The actual code, however, tests the index this way: if (index<=0 || index >= vfd->tvnormsize) { ret=-EINVAL; So any application which passes in index=0 gets EINVAL right off the bat - and, in fact, this is what happens to mplayer. So I think the following patch is called for, and maybe even appropriate for a 2.6.18.x stable release. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-10V4L/DVB (4608c): Fix I2C dependencies for saa7146 modulesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4608b): i2c deps fix on DVBAndrew de Quincey
Several DVB modules depends on I2C Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4605): Fixes an issue with V4L1 and make headers-installMauro Carvalho Chehab
V4L1 support should be disabled when no CONFIG_VIDEO_V4L1_COMPAT is defined, to allow checking for broken V4L2 ports. This is very important during the migration phase for V4L2 API. However, userspace apps should be capable of using both APIs, since they need to test at runtime, via VIDIOCGCAP ioctl, if V4L1 is supported. So, when __KERNEL__ is not defined, those ioctls and corresponding structs should be visible. This patch also removes the obsolete defines HAVE_V4L1 and HAVE_V4L2, that where causing some confusion, and were replaced by CONFIG_VIDEO_V4L1_COMPAT and CONFIG_VIDEO_V4L2. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4520): Fix an error when loading bttv driver on PV M4900.Mauro Carvalho Chehab
Previously, this were reported: Ooops: IR config error [card=139] Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4511): Restore tuner_ymec_tvf66t5_b_dff_pal_ranges[] to fix UHF ↵Hermann Pitton
switch functionality The tena_9533_di_pal_ranges use 0x04 instead the original 0x08 for the UHF (range 2) switching. This is wrong and therefore nothing happens. Restore tuner_ymec_tvf66t5_b_dff_pal_ranges[] to make the UHF switch working again. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4494a): Fix compilation when V4L1 support is not presentMauro Carvalho Chehab
VIDIOCGMBUF should be compiled only when V4L1 support is selected, since this ioctl is from the obsoleted API. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4431): Add several error checks to dstYeasah Pell
Signed-off-by: Yeasah Pell <yeasah@shwide.com> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4430): Quickcam_messenger compilation fixDiego Calleja
In bugzilla #6943, Maxim Britov reported: "I can enable Logitech quickcam support in .config, but it want be compile. I have to add into drivers/media/video/Makefile: obj-$(CONFIG_USB_QUICKCAM_MESSENGER) += usbvideo/" He's right, just enable that driver as module while disabling every other driver that gets into that directory, nothing will get compiled. This patch fixes the Makefile. Signed-off-by: Diego Calleja <diegocg@gmail.com> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4427): Fix V4L1 Compat for VIDIOCGPICT ioctlMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4419): Turn on the Low Noise Amplifier of the Samsung tuners.Hans Verkuil
Without the LNA these tuners perform very poorly (read 'unwatchable') when the signal is weak. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4418): Fix broken msp3400 module option 'standard'Hans Verkuil
Due to a wrong statement order the 'standard' module option didn't work for 'G' model chips. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4416): Cx25840_read4 has wrong endianness.Hans Verkuil
cx25840_read4 assembled the bytes in the wrong order. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4411): Fix minor errors in build filesTrent Piepho
In pwc Kconfig, change 'depends' to 'depends on' In dvb-core Makefile, change '=' to ':=' Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4407): Driver dsbr100 is a radio device, not a video one!Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4399): Fix a typo that caused some compat stuff to not workMauro Carvalho Chehab
Config option typo: -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4395): Restore compat_ioctl in pwc driverLuc Van Oostenryck
The compat_ioctl support of the pwc driver was dropped during the last update of the driver. I suppose it was by mistake. If yes here is the patch to restore the support. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@looxix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4371a): Fix V4L1 dependencies on compat_ioctl32Mauro Carvalho Chehab
Compat32 should be able to handle V4L1 ioctls if the old API support were selected. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4380): Bttv: Revert VBI_OFFSET to previous value, it works betterTrent Piepho
A previous patch changed VBI_OFFSET to match what the datasheets say it should be. However, the bt8x8 datasheets are wrong. The old value of 244 is closer to what is actually observed. The real value appears to not be constant and is different for different chip revisions. Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4379): Videodev: Check return value of class_device_register() ↵Trent Piepho
correctly Errors are return values < 0, not != 0. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4373): Correctly handle sysfs error leg file removal in pvrusb2Mike Isely
Take note of which sysfs files / groups that the pvrusb2 successfully creates and only delete those specific items when tearing things down. (Previously we just blindly tore everything down every time.) Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4368): Bttv: use class_device_create_file and handle errorsTrent Piepho
Revert bttv-driver.c from video_device_create_file() to use class_device_create_file() again. video_device_create_file() is only available when V4L1 is on. Proper error checking is added for failure of class_device_create_file(). Will print error message and unroll partially created sysfs entries. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4367): Videodev: Handle class_device related errorsTrent Piepho
Add proper error checking and roll-back for failure of class_device_create_file() in videodev.c. Print error messages and unroll partially created sysfs entries. Also, failure of class_device_register() in video_register_device() is handled correctly. It was failing to de-allocate the minor number. This must be done in video_register_device(), since the caller has no way of knowing if failure occurred before or after the class device was registered. Also added an error message if video_register_device() is called with an unknown type, which should never happen. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4365): OVERLAY flag were enabled by mistakeMauro Carvalho Chehab
A patch from Aug, 17 activated by mistake OVERLAY flag on cx88-video, together with several cx88-blackbird cleanups. This makes the cx88 driver to report: /dev/video0 [v4l2]: ioctl VIDIOC_G_FBUF: Invalid argument instead of: /dev/video0 [v4l2]: no overlay support Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4344): Fix broken dependencies on media Kconfig Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4343): Fix for compilation without V4L1 or V4L1_COMPATMauro Carvalho Chehab
Removed usage of HAVE_V4L1 Including videodev.h will just include videodev2.h if V4L1 is not supported V4L1 code at core drivers will honor CONFIG_V4L1_COMPAT stuff Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4341): VIDIOCSMICROCODE were missing on compat_ioctl32Mauro Carvalho Chehab
video_code size is 24 on i386 and 32 on x86_64, so a proper handling is needed on compat_ioctl32 to fix it. This code should be tested, since just *a few* boards use this ioctl. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4322): Fix dvb-pll autoprobingAndrew de Quincey
Trent Piepho pointed out that the pll test i2c transmission is slightly wrong; it was transmitting a zero length message, and then reading from the PLL. This was wrong; it should only be transmitting a single read i2c message. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4311): Fix possible dvb-pll oopsAndrew de Quincey
Supplying a NULL i2c adapter to dvb_pll_attach is allowed, for example with mt352 demods. However, the pll i2c probe will segfault because it does not check for this. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4337): Refine dead code elimination in pvrusb2Mike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4323): [budget/budget-av/budget-ci/budget-patch drivers] fixed DMA ↵Oliver Endriss
start/stop code Fix bug reported by Andrew de Quincey: After cold boot the saa7146 DMA did not start if the demuxer was opened before the frontend has locked to the signal. DMA transfers will be started now if (and only if) the frontend is locked and data should be sent to the demuxer. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4316): Check __must_check warningsMichael Krufky
Check __must_check warnings for class_device_register and class_device_create_file video_device_create_file was declared as a void, but instead should return the int value of class_device_create_file. Move the check from bttv-driver.c into v4l2-dev.h, because all other callers of video_device_create_file must also be checked. Replace the call to class_device_create_file in videodev.c with video_device_create_file, as defined in v4l2-dev.h, so that the return value of class_device_create_file will be checked. Check the return value of class_device_register in videodev.c and pvrusb2-sysfs.c Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4314): Set the Auxiliary Byte when tuning LG H06xF in analog modeMichael Krufky
With the LG H06xF tuners, an auxiliary byte must be sent after the standard four-byte i2c sequence. The code that does this is currently in the wrong place, causing random bytes to be written to the tuner over i2c in the set_type function. This patch moves this code from set_type to default_set_tv_freq. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4313): Bugfix for keycode calculation on NPG remotesRicardo Cerqueira
Fix keycode calculations (all codes for this remote were wrong due to a lost + sign) Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4310): Saa7134: rename dmasound_{init, exit}Adrian Bunk
Two different exports with the same name are not a good idea: $ grep -r EXPORT_SYMBOL\(dmasound_init\) * drivers/media/video/saa7134/saa7134-core.c:EXPORT_SYMBOL(dmasound_init); sound/oss/dmasound/dmasound_core.c:EXPORT_SYMBOL(dmasound_init); $ This patch renames the saa7134 dmasound_{init,exit} to saa7134_dmasound_{init,exit}. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4306): Support non interlaced capture by default for saa713xHartmut Hackmann
This patch just sets the option noninterlaced to 1 by default since it has no known disadvantages. It is still possibe to get the old behaviour by setting noninterlaced=0. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4298): Check all __must_check warnings in bttv.Randy Dunlap
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4296): Remove stradis MODULE_DEVICE_INFO definitionAndrew de Quincey
To prevent autoloading of the driver, as it then conflicts with every other saa7146 device in existence. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4295): Fix typo in comment for TDA9819Marco Schluessler
Fix typo in comment for TDA9819 Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4294): Fix broken tda665x PLL definition.Andrew de Quincey
It was pointed out on the mailing list that this PLL definition is broken. I went back to the original dibusb driver and confirmed it used to use these settings, as well as consulting the datasheet. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4293): Fix unstable DISEQC behaviour on budget cards.Andrew de Quincey
Use the stv0299 native DISEQC implementation instead of the bitbanging one as required by the ves1893. This was originally found by Oliver Endriss. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4292): Fix DISEQC regressionAndrew de Quincey
The changes to add frontend reinitialisation moved the position where the init() op is called into the frontend thread. Unfortunately, since DISEQC operations do not use the frontend thread, this meant that DISEQC could be called against an uninitalised frontend, leading to all sorts of trouble. Patch fixes this by reinstating the original fronted intialisation call. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4291): Add dvbpll i2c device check.Andrew de Quincey
Some cards have multiple possible addresses for their PLLs, with no other way to tell if a PLL is present or not apart from probing to see if an i2c device is present. This adds a quick check to see if an i2c device is present at the given i2c address. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-10[PATCH] release_firmware() fixesMagnus Damm
Use release_firmware() to free requested resources. According to Documentation/firmware_class/README the request_firmware() call should be followed by a release_firmware(). Some drivers do not however free the firmware previously allocated with request_firmware(). This patch tries to fix this by making sure that release_firmware() is used as expected. Signed-off-by: Magnus Damm <magnus@valinux.co.jp> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02[PATCH] irq-flags: media: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: Remove obsolete #include <linux/config.h> remove obsolete swsusp_encrypt arch/arm26/Kconfig typos Documentation/IPMI typos Kconfig: Typos in net/sched/Kconfig v9fs: do not include linux/version.h Documentation/DocBook/mtdnand.tmpl: typo fixes typo fixes: specfic -> specific typo fixes in Documentation/networking/pktgen.txt typo fixes: occuring -> occurring typo fixes: infomation -> information typo fixes: disadvantadge -> disadvantage typo fixes: aquire -> acquire typo fixes: mecanism -> mechanism typo fixes: bandwith -> bandwidth fix a typo in the RTC_CLASS help text smb is no longer maintained Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
2006-06-30V4L/DVB (4290): Add support for the TCL M2523_3DB_E tuner.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>