aboutsummaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2008-10-04V4L/DVB (8955): bttv: Prevent NULL pointer dereference in radio_openJean Delvare
Fix the following crash in the bttv driver: BUG: unable to handle kernel NULL pointer dereference at 000000000000036c IP: [<ffffffffa037860a>] radio_open+0x3a/0x170 [bttv] This happens because radio_open assumes that all present bttv devices have a radio function. If a bttv device without radio and one with radio are installed on the same system, and the one without radio is registered first, then radio_open checks for the radio device number of a bttv device that has no radio function, and this breaks. All we have to do to fix it is to skip bttv devices without a radio function. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8935): em28xx-cards: Remove duplicate entry ↵Douglas Schilling Landgraf
(EM2800_BOARD_KWORLD_USB2800) Removed duplicated entry for EM2800_BOARD_KWORLD_USB2800 Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8933): gspca: Disable light frquency for zc3xx cs2102 Kokom.Costantino Leandro
CS2102K stop streaming on setlightfreq (50Hz & 60Hz). Disable it for now until a correct solution is found. Signed-off-by: Costantino Leandro <le_costantino@pixartargentina.com.ar> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8926): gspca: Bad fix of leak memory (changeset 43d2ead315b1).Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8919): cx18: Fix tuner audio input for Compro H900 cardsHans Verkuil
Earlier fixes to get the tuner audio working correctly broke the audio on the Compro VideoMate H900 cards. This is now fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-29V4L/DVB (8909): gspca: PAC 7302 webcam 093a:262a added.Hans de Goede
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-29V4L/DVB (8905): ov511: fix exposure sysfs attribute bugHans Verkuil
Exposure was always 0. Thanks to sparse for finding this. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-29V4L/DVB (8904): cx88: add missing unlock_kernelHans Verkuil
sparse found an unbalanced BKL usage. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-29V4L/DVB (8892): pvrusb2: Handle USB ID 2040:2950 same as 2040:2900Mike Isely
The device 2040:2950 is a really old variant of the PVR USB2 hardware. I have just learned of its existence. For the purposes of the pvrusb2 driver, it is functionally identical to the well known 29xxx series (2040:2900). Amazing that this went undetected for 3+ years. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-29V4L/DVB (8887): gspca: fix memory leakDouglas Schilling Landgraf
Free allocated memory Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-29V4L/DVB (8886): ov511: fix memory leakDouglas Schilling Landgraf
Free allocated memory Cc: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-29V4L/DVB (8885): cpia2_usb: fix memory leakDouglas Schilling Landgraf
Free allocated memory Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-29V4L/DVB (8884): em28xx-audio: fix memory leakDouglas Schilling Landgraf
Free allocated memory Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-29V4L/DVB (8883): w9968cf: Fix order of usb_alloc_urb validationDouglas Schilling Landgraf
Fixed order of usb_alloc_urb pointer validation. Cc: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-10V4L/DVB (8789): wm8739: remove wrong kfreeHans Verkuil
i2c_client is allocated for us, we should never free it ourselves. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-10V4L/DVB (8559a): Fix a merge conflict at gspca/sonixbMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-09-04V4L/DVB (8881): gspca: After 'while (retry--) {...}', retry will be -1 but ↵Li Zefan
not 0. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8880): PATCH: Fix parents on some webcam driversHans de Goede
While doing some testing using Luca Risolia's sonix driver I noticed that the video device did not get ACL's set to allow access by locally logged in users, nor does it show up as a video device in lshal, causing cheese to not see it. This turns out to be caused by all of Luca Risolia's drivers not setting the parent member of the video_device struct. This patch fixes this. Cc: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8877): b2c2 and bt8xx: udelay to mdelayThierry MERLE
b2c2-flexcop, dvb/bt8xx and video/bt8xx fails to build on ARM with: __bad_udelay is specifically designed on ARM to fail when udelay is called in a bad way. arch/arm/include/asm/delay.h has this to say about __bad_udelay: /* * This function intentionally does not exist; if you see references to * it, it means that you're calling udelay() with an out of range value. * * With currently imposed limits, this means that we support a max delay * of 2000us. Further limits: HZ<=1000 and bogomips<=3355 */ extern void __bad_udelay(void); Solution is to replace udelay by a mdelay and udelay with value less than 2000 Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8876): budget: udelay changed to mdelayThierry MERLE
budget.ko fails to build on ARM with: ERROR: "__bad_udelay" [drivers/media/dvb/ttpci/budget.ko] undefined! make[1]: *** [__modpost] Error 1 __bad_udelay is specifically designed on ARM to fail when udelay is called in a bad way. arch/arm/include/asm/delay.h has this to say about __bad_udelay: /* * This function intentionally does not exist; if you see references to * it, it means that you're calling udelay() with an out of range value. * * With currently imposed limits, this means that we support a max delay * of 2000us. Further limits: HZ<=1000 and bogomips<=3355 */ extern void __bad_udelay(void); Solution is to replace udelay by a mdelay and udelay with value less than 2000 Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8874): gspca: Adjust hstart for sn9c103/ov7630 and update usb-id's.Hans de Goede
- Adjust hstart in ov7630 on sn9c103 initdata to shift bayer pattern, this is the same change as done for the other initdata tables in a previous patch. - Assign usb-id's for the ov7630 + sn9c103 to gspca if gspca and sn9c102 drivers are both enabled. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8873): gspca: Bad image offset with rev012a of spca561 and adjust ↵Hans de Goede
exposure. -Make raw bayer header size change from 20 to 16 affect rev072a only, my 2 rev012a cams both have a header size of 20 -While testing this I also tested the new exposure setting (good work on finding the register JF), and after quite a bit of testing have found out the exact meaning of the register, this patch modifies setexposure to control the exposure over a much wider range. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8872): gspca: Bad image format and offset with rev072a of spca561.Jean-Francois Moine
- have 2 pixfmt tables - offset of Bayer frames at 16 instead of 20. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8870): gspca: Fix dark room problem with sonixb.Hans de Goede
When using the sonixb driver in a dark room and given that the autoexposure algorithm starts with a setting most suitable for daylight, the picture produced by the cam may actually be 100% black leading to a avg_lum value of 0, so an avg_lum value of 0 does not always signal an exposure settings change (which it normally does). This patch adds a check for the really black image case and stops dropping all frames as invalid in this case. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8869): gspca: Move the Sonix webcams with TAS5110C1B from sn9c102 ↵Hans de Goede
to gspca. This patch makes gspca claim the USB-ID for sn9c101/2 cams with a TAS5110C1B sensor even if both gspca and sn9c102 are enabled, as these cams are much better supported under gspca (and extensively tested with gspca). It also removes an usb-id from sn9c102 for one more unsupported bridge sensor combo. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8868): gspca: Support for vga modes with sif sensors in sonixb.Hans de Goede
- Add documentation for some known registers - Add support for vga modes (320x240, 160x120) for sif sensors - Remove F_RAW sensor flag raw mode should work on any sensor as its a bridge only thing and keeping the flag was becoming awkward. - Fixup ov6650 and pas106 auto exposure window settings Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8844): dabusb_fpga_download(): fix a memory leakAdrian Bunk
This patch fixes a memory leak in an error path. Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8843): tda10048_firmware_upload(): fix a memory leakAdrian Bunk
This patch fixes a memory leak ("fw" wasn't freed). Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8842): vivi_release(): fix use-after-freeAdrian Bunk
video_device_release() does kfree(), which made the following printk() doing a use-after-free. printk() first and release then. Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8840): dib0700: add basic support for Hauppauge Nova-TD-500 (84xxx)Michael Krufky
This adds basic support for the Hauppauge Nova-TD-500 84xxx series. A future patch will allow for one aerial input to supply both tuners. With the current code, an aerial must be plugged into each antannae input in order for both tuners to function. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8839): dib0700: add comment to identify 35th USB id pairMichael Krufky
This comment helps to make the code more readable. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8837): dvb: fix I2C adapters name sizeJean Delvare
Some DVB drivers are incorrectly assuming that the size of i2c_adapter.name is I2C_NAME_SIZE. Here's a fix. Also change strncpy to strlcpy, as the former is error-prone (and was indeed incorrectly used.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Uwe Bugla <uwe.bugla@gmx.de> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8835): gspca: Same pixfmt as the sn9c102 driver and raw Bayer added ↵Hans de Goede
in sonixb. 1) Lower the hstart setting for all sensor by 1 so that we generate (compressed) BGGR data just like sn9c102 does (instead of GBRG data) 2) Add support for raw bayer output in the lowest resolutions (not enough bandwidth for higher resolutions), this should work with all sensors but to be sure only enable it for sensors where it has been tested. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8834): gspca: Have a bigger buffer for sn9c10x compressed images.Hans de Goede
Under certain conditions sonixb compressed frame size can get bigger then the uncompressed size (seen with 0c45:6028), so make the buffers slightly bigger. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8833): gspca: Cleanup the sonixb code.Hans de Goede
-the usb-id table caried several flags which were not usb-id specific but sensor specific, add a sensor_data array and move these flag there -fr_h_sz was being abused to store and check which bridge was being used instead add a bridge member to the sd struct -now that we have a sensor_data table use that to store pointers to init_sequences instead of using switch cases on sd->sensor Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8832): gspca: Bad pixelformat of vc0321 webcams.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8831): gspca: Resolve webcam conflicts between some drivers.Hans de Goede
-remove USB-id's from zc0301 for cams for which zc0301.c does not support the sensor -remove USB-id's from sn9c102 for cams where sn9c102 does not support the bridge sensor combination -no longer make inclusion of usb id's removed from zc0301 and sn9c102 conditional in gspca -fix conditional inclusion of USB-id's in gspca to also work when the conflicting drivers are build as a module -add a number of USB-id's to gspca from various windows .inf files: 0c45:608f from generic sonix sn9c103 inf file (+ ov7630 which we support) 041e:4022 from creative webcam nx pro, same as already supported 041e:401e 0ac8:0301 from generic zc0301 driver which supports many sensors 10fd:804d from typhoon webshot driver (also FlyCAM-USB 300 plus) Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8830): gspca: Move some probe code to the new init function.Hans de Goede
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8829): gspca: Have a clean kmalloc-ated buffer for USB exchanges.Jean-Francois Moine
The USB buffer may be used for DMA and there may be a caching problem if the buffer is part of the device structure. Thanks to Alan Stern. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8828): gspca: Set the clock at the end of initialization in sonixj.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8827): gspca: Stop pac7302 autogain oscillation.Hans de Goede
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8826): gspca: Webcam Labtec 2200 (093a:2626) added in pac7311.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8825): gspca: More controls for pac73xx and new webcam 093a:2624.Hans de Goede
-Add usb id for 093a:2624 (pac7302) -Report some controls to userspace with 7302 only, as they are 7302 only -Add gain and exposure controls -Add autogain -Fix 7302 imaged being mirrored by default Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8824): gspca: Too much code removed in the suspend/resume changeset.Jean-Francois Moine
- the stream must stop when the main application closes the device. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8823): gspca: H and V flips work for ov7670 only in ov519.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8822): gspca: Change some subdriver functions for suspend/resume.Jean-Francois Moine
- new function 'init' called on probe and resume - remove the functions 'open' and 'closed' - 'stopN' and 'stop0' are optional Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8820): gspca: Change initialization and gamma of zc3xx - pas106.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8819): gspca: Initialize the ov519 at open time and source cleanup.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8818): gspca: Reinitialize the device on resume.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8817): gspca: LED and proble changes in sonixb.Hans de Goede
- turn the led of the cam off after plugging in the cam - move the probe code from open to config, so that if the probe fails we never register Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-16 09:19:27 +0000