aboutsummaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2006-03-23Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (3568k): zoran: Use i2c_master_send when possible V4L/DVB (3568j): adv7175: Drop unused encoder dump command V4L/DVB (3568i): adv7175: Drop unused register cache V4L/DVB (3568h): cpia: correct email address V4L/DVB (3568g): sem2mutex: zoran V4L/DVB (3568f): saa7110: Fix array overrun V4L/DVB (3568e): bt856: Spare memory V4L/DVB (3568d): saa7111.c fix V4L/DVB (3568c): zoran: Init cleanups V4L/DVB (3568b): saa7111: Prevent array overrun V4L/DVB (3568a): saa7114: Fix i2c block write
2006-03-23[PATCH] I2C: Drop unneeded i2c-dev.h includesJean Delvare
Several media/video and sound drivers include i2c-dev.h while they don't need it at all. Clean it up. This header file is really only needed by i2c-dev.c and compat_ioctl.c, other drivers should never need it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23V4L/DVB (3568k): zoran: Use i2c_master_send when possibleJean Delvare
Change all the Zoran (ZR36050/ZR36060) drivers to use i2c_master_send instead of i2c_transfer when possible. This simplifies the code by a few lines in each driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-23V4L/DVB (3568j): adv7175: Drop unused encoder dump commandJean Delvare
Drop support for the ENCODER_DUMP command in the adv7175 driver. ENCODER_DUMP was never actually defined as far as I can see, so the code was ifdef'd out, and I suspect it was never used, not even once, as it includes an obvious array overrun. The register values of this specific chip can be dumped in a generic way using the i2c-dev driver and the "i2cdump" user-space tool if it is ever really needed. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-23V4L/DVB (3568i): adv7175: Drop unused register cacheJean Delvare
Drop the adv7175 register cache, as it is only written to and never read back from. This saves 128 bytes of memory and slightly speeds up the register writes. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-23V4L/DVB (3568h): cpia: correct email addressRandy Dunlap
Correct email address typo (erdfeld -> erdfelt). Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-23V4L/DVB (3568g): sem2mutex: zoranIngo Molnar
Semaphore to mutexes conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-23V4L/DVB (3568f): saa7110: Fix array overrunJean Delvare
Fix a (probably harmless) array overrun in the DECODER_DUMP command of the saa7110 driver. No big deal as this command is not used anywhere anyway. Also reformat the dump so that it displays nicely. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-23V4L/DVB (3568e): bt856: Spare memoryJean Delvare
The bt856 driver has a register cache much larger than needed. We really only write to 3 registers, so a 32-byte cache is a bit too much. We can be just as efficient with a 6-byte cache. We could even do with a 3-byte cache, but at the cost of additional arithmetics arguably not worth the spared 3 bytes. Also, 4 of the 6 other members of the bt856 data structure were not used anywhere, so we can as well drop them for an additional 16 bytes of memory spared. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-23V4L/DVB (3568d): saa7111.c fixMartin Samuelsson
When grabbing composite video with Iomega Buz, the stock driver will prevent grabbing from the same input twice in a row, forcing the user to switch inputs before anything useful can be grabbed again. It is caused by some optimization code in the input selection parts, and triggered by the saa7111_command() executing cmd 0. The attached patch will remedy this by disabling cmd 0 altogether; a fix that has no found negative effects on the rest of the code. In fact, saa7110.c does the exact same thing. Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-23V4L/DVB (3568c): zoran: Init cleanupsJean Delvare
Cleanups to the zr36057 initialization: * Drop intermediate local variables. * Single error path. Also drop a needless cast on kfree. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-23V4L/DVB (3568b): saa7111: Prevent array overrunJean Delvare
Explicitely state the number of registers the SAA7111 has, and use that defined value where relevant. This should prevent any future array overrun like the one I just fixed in the saa7110 driver. This patch also saves 8 bytes of memory as a side effect, as the register cache was larger than needed. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-23V4L/DVB (3568a): saa7114: Fix i2c block writeJean Delvare
Fix the i2c block write mode of the saa7114 driver. A previous code change accidentally commented out a local variable increment, which should have been kept, causing the register writes over the I2C bus to never be batched, replacing any attempted block write by slower, individual write transactions. Also drop the commented out code, as it only adds to confusion. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-22Merge with ↵Jaroslav Kysela
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
2006-03-22[ALSA] Fix snd_xxx_t typedefsTakashi Iwai
Modules: PXA Mainstone driver,CX88 driver,SAA7134 driver Replace snd_xxx_t typedefs with explicit structs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-21Revert "V4L/DVB (3543): Fix Makefile to adapt to bt8xx/ conversion"Linus Torvalds
This reverts commit 08f1d0b99f4e2203935d86640a7fec5c233b777c The "bt8xx/ conversion" for drivers/video/ hasn't actually percolated all the way to this tree, so the Makefile change escaped too soon. Build breakage noticed by Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-21V4L/DVB (3545): Fixed no_overlay option and quirks on saa7134 driverMauro Carvalho Chehab
Some chipsets have several problems when pci to pci transfers are activated on overlay mode. the option no_overlay allows disabling such feature of the driver, in favor of keeping the system stable. The default is to use pcipci_fail flag defined on drivers/pci/quirks.c. It also allows the user to override it by forcing disable overlay or forcing enable. Forcing enable may generate PCI transfer corruption, including disk mass corruption, so should be used with care. Added a text description to this option and make messages looks the same at both bttv and saa7134 drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3543): Fix Makefile to adapt to bt8xx/ conversionManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3537a): Whitespace cleanupMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3533): Add WSS (wide screen signalling) module parametersOliver Endriss
Add wss_cfg_4_3 and wss_cfg_16_9 configuration options. Firmware 2623 or later required. Both parameters are bit masks: - bit 15: disable WSS - bit 14: send short WSS burst, then turn off WSS - bit 13..0: WSS bits as specified by the standard These parameters are useful if you own a broken tv set which does not handle wss correctly. Default settings: - wss_cfg_4_3: 0x4008 - wss_cfg_16_9: 0x0007 These should work with most devices. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3532): Moved duplicated code of ALPS BSRU6 tuner to a standalone file.Perceval Anichini
Moved duplicated code of ALPS BSRU6 tuner to a standalone file. Modified av7110 and budget drivers to include the new file. Signed-off-by: Perceval Anichini <perceval.anichini@streamvision.fr> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3530): Kconfig: remove VIDEO_AUDIO_DECODERMichael Krufky
- removed VIDEO_AUDIO_DECODER Kconfig menu item. VIDEO_MSP3400, VIDEO_CS53L32A and VIDEO_WM8775 now each have their own menu items. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3529): Kconfig: add menu items for cs53l32a and wm8775 A/D convertersMichael Krufky
- created Kconfig item, VIDEO_CS53L32A, for the cs53l32a module which supports the Cirrus Logic CS53L32A Low Voltage Stereo A/D Converter. - created Kconfig item, VIDEO_WM8775, for the wm8775 module which supports the Wolfson Microelectronics WM8775 high performance stereo A/D Converter. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3528): Kconfig: fix ATSC frontend menu item names by manufacturerMichael Krufky
- Corrected typo for NxtWave NXT200X - Added "Oren" manufacturer name to menu items for OR51132 and OR51211 - Removed "(pcHDTV HDx000 card)" from Oren frontends menu item names, This isn't necessary, as these frontends are selected by the card drivers, build configuration (DVB_BT8XX and VIDEO_CX88_DVB). Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3527): VIDEO_CPIA2 must depend on USBAdrian Bunk
CONFIG_VIDEO_CPIA2=y, CONFIG_USB=n results in the following compile <-- snip --> ... LD .tmp_vmlinux1 drivers/built-in.o: In function `set_alternate':cpia2_usb.c:(.text+0x443aa2): undefined reference to `usb_set_interface' drivers/built-in.o: In function `cpia2_usb_stream_resume': undefined reference to `usb_alloc_urb' drivers/built-in.o: In function `cpia2_usb_stream_resume': undefined reference to `usb_submit_urb' drivers/built-in.o: In function `cpia2_usb_stream_pause': undefined reference to `usb_kill_urb' drivers/built-in.o: In function `cpia2_usb_stream_pause': undefined reference to `usb_free_urb' drivers/built-in.o: In function `cpia2_usb_disconnect':cpia2_usb.c:(.text+0x443e14): undefined reference to `usb_driver_release_interface' drivers/built-in.o: In function `cpia2_usb_transfer_cmd': undefined reference to `usb_control_msg' drivers/built-in.o: In function `cpia2_usb_transfer_cmd': undefined reference to `usb_control_msg' drivers/built-in.o: In function `cpia2_usb_complete':cpia2_usb.c:(.text+0x444836): undefined reference to `usb_submit_urb' drivers/built-in.o: In function `cpia2_usb_cleanup': undefined reference to `usb_deregister' drivers/built-in.o: In function `cpia2_usb_init': undefined reference to `usb_register_driver' Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3525): Kconfig: remove VIDEO_DECODERMichael Krufky
- removed VIDEO_DECODER Kconfig menu item. VIDEO_CX25840, VIDEO_SAA711X and VIDEO_SAA7127 now each have their own menu items. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3524): Kconfig: add menu items for saa7115 and saa7127Michael Krufky
- created Kconfig menu item, VIDEO_SAA711X, for the saa7115 module, which supports SAA7113, SAA7114 and SAA7115 video decoders. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3494): Kconfig: select VIDEO_MSP3400 to build msp3400.koMichael Krufky
The msp3400 driver is currently only being built if the bttv driver is selected. There are new drivers that will be needing msp3400, so simply including msp3400 in the Makefile is no longer appropriate. This patch creates VIDEO_MSP3400, and alters VIDEO_BT848, VIDEO_PVRUSB2 and VIDEO_AUDIO_DECODER each to select VIDEO_MSP3400. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3522): Fixed a trouble with other PAL standardsMauro Carvalho Chehab
V4L2_STD_PAL define is not correct. It specifies only 50Hz PAL standards. This patch fixes saa7113 color config for other PAL video standards. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3521): Avoid warnings at video-buf.cMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3514): SAA7113 doesn't have auto std chroma detection modeMauro Carvalho Chehab
This patch makes chroma standard selection based at possible values, according with datasheet. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3513): Remove saa711x driverMauro Carvalho Chehab
Now, em28xx uses saa7115 instead of saa711x. saa7115 driver is capable of handling saa 7113, 7114 and 7115. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3509): Make a needlessly global function static.Adrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3506): Cinergy T2 dmx cleanup on disconnectMarkus Rechberger
Detaching the device didn't clean up several device files in /dev/dvb, after applying that patch all dvb devices disappeared as expected. Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3504): Medion 7134: Autodetect second bridge chipMichael Krufky
The device, Medion 7134, has two saa7134 chips on it, but only one of them is functional in the current saa7134 driver. This patch adds autodetection for the second, unsupported saa7134 chip, as SAA7134_BOARD_MD7134_BRIDGE_2, and displays a message to the user (in dmesg) indicating that the second chip isn't yet functional. This is useful for users, since two instances of the saa7134 driver will spawn. This patch will prevent confusion by warning the user that only one of the chips on the board are functional. There are other versions of the SAA7134_BOARD_MD7134 with only a single saa7134 bridge/decoder -- those devices will not be affected by this patch. Only devices containing the second chip will display the warning. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3503): Whitespace: fix incorrect indentation of curly bracketMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3502): Saa7134: make unsupported secondary decoder message genericMichael Krufky
There are already some supported devices that contain two saa713x chips on-board, where only one of these chips is currently functional in the driver. We are already printing a warning message for the second saa7134 decoder in SAA7134_BOARD_AVERMEDIA_A169_B. This patch alters that case to make it generic, so that other cards in the same situation can use it. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3501): Dmxdev: use dvb_ringbufferAndreas Oberritter
Use dvb_ringbuffer instead of an own buffer implementation in dmxdev.[ch]. Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3500): Ringbuffer: don't reset pointers to zeroAndreas Oberritter
Oliver Endriss spotted, that resetting read and write pointers on flush() requires additional locking and breaks the av7110 driver. Therefore this patch partially reverts the previous patch titled "make dvb_ringbuffer compatible to dmxdev_buffer". Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3499): Fix a bug when more than MAXBOARDS were plugged on em28xxMauro Carvalho Chehab
Coverity reported a bug at checking max number of supported boards by em28xx init code. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3497): Remove redundant makefile inclusion of tuner.oMichael Krufky
VIDEO_MXB selects VIDEO_TUNER, so we don't have to include tuner.o in the Makefile. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3496): Cpia2: move Kconfig build logic into cpia2/KconfigMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3495): Kconfig: select VIDEO_CX25840 to build cx25840 a/v decoder ↵Michael Krufky
module The cx25840 module requires external firmware in order to function, so it must select FW_LOADER, but saa7115 and saa7129 do not require it. This patch creates VIDEO_CX25840, and alters VIDEO_DECODER to select it. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3488): Snd_cx88_create: don't dereference NULL coreDuncan Sands
If the call to cx88_core_get returns a NULL value, it is dereferenced by cx88_reset, and perhaps by cx88_core_put. Spotted by the Coverity checker. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3485): BUG_ON() Conversion in drivers/video/mediaEric Sesterhenn
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3484): Make dvb_ringbuffer compatible to dmxdev_bufferAndreas Oberritter
Added variable 'error' to struct dvb_ringbuffer, which is set to zero on init() and flush(). Also reset read an write pointers to zero on flush() to get less fragmented data. Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3479): Cleanup mangled whitespaceMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3449): Cx88 default picture controls valuesMarcin Rudowski
This patch fixes default values for some picture controls: - brightness set to 50% by default (now is 0%) - hue set to 50% by default (now is 0%) - sets saturation to datasheet value - volume set to 0dB (now is -32dB) and some left small fixes: - twice offset adding - balance didn't follow datasheet (bits[0:5] = attenuation; bit[6] = channel to provide attenuation) Signed-off-by: Marcin Rudowski <mar_rud@poczta.onet.pl> Signed-off-by: Ian Pickworth <ian@pickworth.me.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3448): Cx88-input.c: add IR remote control support to ↵Matheus Izvekov
CX88_BOARD_PROLINK_PLAYTVPVR This patch adds support for the IR remote control found in the card CX88_BOARD_PROLINK_PLAYTVPVR. Signed-off-by: Matheus Izvekov <mizvekov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3447): Cx88-cards.c: fix values of gpio0 for card ↵Matheus Izvekov
CX88_BOARD_PROLINK_PLAYTVPVR This patch changes the gpio0 values for the card CX88_BOARD_PROLINK_PLAYTVPVR to the ones observed using RegSpy from the dscaler project. Signed-off-by: Matheus Izvekov <mizvekov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>