aboutsummaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2008-01-25V4L/DVB (6766): ivtv: remove i2c legacy support from drivers that no longer ↵Hans Verkuil
need it Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6765): ivtv: convert to bus-based i2c APIHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6764): ivtv: select VIDEO_IR in KconfigHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6763): ivtv: add AVerMedia EZMaker PCI Deluxe supportHans Verkuil
Add support for the AVerMedia EZMaker PCI Deluxe and update the ivtv cardlist. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6762): ivtv: update version number to 1.2Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6759): CodingStyle fixesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6758): Miscelaneous cleanupsMauro Carvalho Chehab
Manually fixed all pertinent checkpatch.pl errors inside the source code. Also removed some unused code at the driver and a few minor cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6755): Avoid troubles when using multiple devicesMauro Carvalho Chehab
mv_count is a counter used to move the vertical bars. Before this patch, it where a static var. This works fine for just one device. However, when using multiple devices, every device would increment it. This patch moves it to its correct place: struct vivi_dev. So, now, each device has its own data. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6754): Allow vivi to open multiple video devicesMauro Carvalho Chehab
Now, it is possible to open multiple vivi devices, by using n_devs parameter. This makes vivi driver closer to a real one. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6753): Fix vivi to support non-zero minor nodeMauro Carvalho Chehab
There were a trouble at vivi driver when using non-zero inodes. This where due to not properly preserving the minor inode after calling video_register. Since this driver is a reference for newer drivers, and it is possible to have more than one video device inside the machine, this patch makes vivi to dynamically allocate video_device struct. Thanks to Gregor Jasny <jasny@vidsoft.de> for pointing the issue. Also, this patch removes a very anoying (but useless) message of not having a proper release call. CC: Gregor Jasny <jasny@vidsoft.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6752): saa7134: Enable remote control support for Avermedia M102Albert Graham
This patch enabled the IR remote control for the Avermedia M102 (card=110), which appears to be the same IR as the already supported device on the Avermedia AVerTV GO 007 FM (card=57) model, the code is two one liners which enable the IR for this device (subsystem: 1461:f31e) Signed-off-by: Albert Graham <agraham@g-b.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6749): v4l-nopage-fixAndrew Morton
dont just copy-and-paste stuff. (compile-tested this time) Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6748): Subject: v4l: nopageNick Piggin
Convert v4l from nopage to fault. Remove redundant vma range checks. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6745): tda18271: remove tuning offset for atsc/qamMichael Krufky
The tuning request coming in from userspace is already center adjusted, so we should not adjust to center (+1.75mhz) within the driver. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6743): cx25840: fix endianness inconsistencyHans Verkuil
cx25840_read4 reads a little-endian 32-bit value whereas cx25840_write4 writes the 32-bit value as big-endian. Convert write4 to use little-endian as well (that's the correct endianness). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6742): ivtv: fix incorrect debug messageHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6741): cx2341x: codingstyle cleanupsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6740): tlv320aic23b: codingstyle cleanupsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6739): cs53l32a: codingstyle cleanupsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6738): wm8739: codingstyle cleanupsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6737): wm8775: codingstyle cleanupHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6736): Fix some errors at the video_ioctl2 conversionMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6735): Reorder functions to make easier to compare with the ↵Mauro Carvalho Chehab
previous code After this patch, the order of the functions will be the same as before the patch converting the driver to user video_ioctl2. This makes easier to diff between the previous version and the newer one. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6734): Converted saa7134-video to use video_ioctl2Douglas Schilling Landgraf
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6732): dsbr100 violates DMA coherency rulesOliver Neukum
Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6731): ivtv: Remove a invalid shadow-variableRichard Knutsson
Remove the shadowing 'struct v4l2_chip_ident *chip', since it already exists and makes the if-statement useless. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6728): tda18271: fix register dump formatMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6727): tda18271: convert table lookup loops to functionsMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6726): tda18271: set image rejection validityMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6725): tda18271: improve debug flexibilityMichael Krufky
converted debug module option to an or-able setting. 1 = info 2 = table map values 4 = register dumps Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6724): tda18271: remove duplicated codeMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6723): tda18271: only force init once during attachMichael Krufky
Once the image rejection calibration procedure has been successful, we should not initialize the tuner registers again. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6719): ivtv: ivtv-yuv clean-up + source cropping bug-fixIan Armstrong
ivtv-yuv code clean up & reformat. Includes minor changes to some debug lines. Also fixes a bug found during the reformatting, which would cause the incorrect amount of yuv data to be sent to the card if source cropping coordinates were used. Apart from the bug-fix, there should be no functional difference to the previous version. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6718): ivtv: ivtv yuv format description correctionIan Armstrong
The driver was incorrectly reporting that it supported YUV 4:2:2 output, when it is actually YUV 4:2:0. Though I believe the hardware can be pushed to 4:2:2, we don't currently support that. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6717): ivtv: Initial merge of video48 yuv handling into the ↵Ian Armstrong
IVTV_IOC_DMA_FRAME framework Previously, all yuv data written to /dev/video48 had only basic support with no double buffering to avoid display tearing. With this patch, yuv frames written to video48 are now handled by the existing IVTV_IOC_DMA_FRAME framework. As such, the frames are hardware buffered to avoid tearing, and honour scaling mode & field order options. Unlike the proprietary IVTV_IOC_DMA_FRAME ioctl, all parameters are controlled by the V4L2 API. Due to mpeg & yuv output restrictions being different, their V4L2 output controls have been separated. To control the yuv output, the V4L2 calls must be done via video48. If the ivtvfb module is loaded, there will be one side effect to this merge. The yuv output window will be constrained to the visible framebuffer area. In the event that a virtual framebuffer size is being used, the limit to the output size will be the virtual dimensions, but only the portion that falls within the currently visible area of the framebuffer will be shown. Like the IVTV_IOC_DMA_FRAME ioctl, the supplied frames must be padded to 720 pixels wide. However the height must only be padded up the nearest multiple of 32. This would mean an image of 102 lines must be padded to 128. As long as the true source image size is given, the padding will not be visible in the final output. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6716): ivtv: yuv interlace mode changeIan Armstrong
Interlace mode selection code moved into the frame setup phase, so it's now run before the frame is loaded into a hardware buffer. Given that it can affect how a new frame is displayed, it was a bit stupid running it after the frame was already visible. A few stray interlace related variables which were linked to individual frames have now been moved into the yuv_frame_info struct. This means that all variables linked to a specific frame are in the same place & not scattered. Minor code reformatting in areas touched by the above changes. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6715): ivtv: Remove unnecessary register updateIan Armstrong
To reduce the number of display register accesses, the yuv code keeps track of the current video settings. Should there be a change in any single parameter, it will update the associated display registers to ensure everything is displayed correctly. The existing check also looks at the field order for the video. This is not required, since field reversal does not require any display register changes. This patch removes the field order from the check. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6714): ivtv: yuv frame parameter fixIan Armstrong
Inadvertently missed a line when converting code to new hardware buffering method. In some circumstances, this would lead to a frame being displayed using parameters belonging to another frame. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6713): ivtv: ivtv_yuv_prep_frame breakup and yuv hardware buffer ↵Ian Armstrong
changes ivtv_yuv_prep_frame is split in smaller code blocks. Modified yuv buffer handling on the PVR350 itself. We now cycle through all 8 hardware buffers. With this patch in place, driver behaviour should remain unchanged from the existing release. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6712): ivtv: ivtv yuv stream handling changeIan Armstrong
Currently the yuv output stream buffer is divided into blocks whose size depend on the broadcast standard selected during the driver init phase. However, the standard can be changed after the init phase. This effectively breaks the yuv output stream handler, since it relies on the different yuv planes being block aligned. This patch changes the setup, so that the block size is always the same. The decoder dma function has been modified to cope with the fact that the second yuv plane may no longer be block aligned. The start of the yuv frame must still be at the beginning of a block, so the stream write function has also been modified to ensure this is always true. Also, the stream write function will now initiate a yuv dma transfer as soon as a full frame is ready. It will not wait until the current write request has completed, or the stream buffer becomes full. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6710): pvrusb2: Recognize ATSC video standard bit valuesMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6709): pvrusb2: minor rework for default video standard handlingMike Isely
pvrusb2: When a per-device-type default video standard is declared, handle it in such a way that it can be correctly and unambiguously reported in the system log. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6708): pvrusb2: Expand comment in device attributes descriptionMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6707): pvrusb2: Remove use of volatile in pipeline control state ↵Mike Isely
machine pvrusb2: Eliminate use of volatile in pipeline control state variables. These were all cases of paranoia; upon further review the overall mechanism employed here should not require use of volatile. This had originally been done out of paranoia, and I have since been convinced that the paranoia is not required. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6706): pvrusb2: Remove use of volatile in command sequencerMike Isely
pvrusb2: Remove use of volatile for command sequencer; these variables are set by interrupt-context code and we check their state in such a manner that there should be no race conditions. This had originally been done out of paranoia, and I have since been convinced that the paranoia is not required. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6705): pvrusb2: Implement default standard selection based on ↵Mike Isely
device type This adds a default video standard setting to the pvr2_device_desc structure for describing device types. With this change it is possible to set a reasonable default standard based on device type. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6703): pvrusb2: Change division to bit-or for tveeprom standardsRoel Kluin
Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6702): pvrusb2: fix typo in commentsMichael Krufky
Firmware file name(s) for 24xxx devices Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6701): pvrusb2: Enable support for "GOTVIEW USB2.0 DVD2" hardwareMike Isely
This changeset allows the pvrusb2 driver to operate a new device type ("GOTVIEW USB2.0 DVD2"). Changes amount to defining a new routing scheme for the device and adding appropriate table entries into pvrusb2-devattr.c. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6700): pvrusb2: Soften the crashed encoder warning messageMike Isely
The pvrusb2 driver has been successfully recovering from a crashed encoder now for over 2 years. I think it's time to reduce the perceived severity of the warning message. While I'd still very much like to stop these crashes, the recovery logic is solid enough that the problem is effectively benign. No point in panicing the users over it. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 02:17:51 +0000