aboutsummaryrefslogtreecommitdiff
path: root/drivers/mfd/Makefile
AgeCommit message (Collapse)Author
2009-01-11mfd: PCF50633 gpio supportBalaji Rao
What the PCF05633 calls as a 'GPIO' is much more than the GPIO in the linux sense and there are only 4 of them - which means, the gpiolib is not used here. Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-11mfd: PCF50633 adc driverBalaji Rao
This patch adds basic support for the PCF50633 ADC. The subtractive mode is not supported yet. Since we don't have adc subsystem, it currently lives in drivers/mfd. Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Acked-by: Jonathan Cameron <jonathan.cameron@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-11mfd: PCF50633 core driverBalaji Rao
This patch implements the core of the PCF50633 driver. This core driver has generic register read/write functions and does interrupt management for its sub devices. Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: move drivers/i2c/chips/menelaus.c to drivers/mfdDavid Brownell
ove the menelaus driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP2 generation chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: move drivers/i2c/chips/tps65010.c to drivers/mfdDavid Brownell
Move the tps65010 driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP1 generation chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: dm355evm msp430 driverDavid Brownell
Basic MFD framework for the MSP430 microcontroller firmware used on the dm355evm board: - Provides an interface for other drivers: register read/write utilities, and register declarations. - Directly exports: * Many signals through the GPIO framework + LEDs + SW6 through gpio sysfs + NTSC/nPAL jumper through gpio sysfs + ... more could be added later, e.g. MMC signals * Child devices: + LEDs, via leds-gpio child (and default triggers) + RTC, via rtc-dm355evm child device + Buttons and IR control, via dm355evm_keys - Supports power-off system call. Use the reset button to power the board back up; the power supply LED will be on, but the MSP430 waits to re-activate the regulators. - On probe() this: * Announces firmware revision * Turns off the banked LEDs * Exports the resources noted above * Hooks the power-off support * Muxes tvp5146 -or- imager for video input Unless the new tvp514x driver (tracked for mainline) is configured, this assumes that some custom imager driver handles video-in. This completely ignores the registers reporting the output voltages on the various power supplies. Someone could add a hwmon interface if that seems useful. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-24mfd: add missing Kconfig entry for da903xSamuel Ortiz
This one was accidentally left out during the rc1 mfd merge. Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-22mfd: twl4030 IRQ handling updateDavid Brownell
- Move it into a separate file; clean and streamline it - Restructure the init code for reuse during secondary dispatch - Support both levels (primary, secondary) of IRQ dispatch - Use a workqueue for irq mask/unmask and trigger configuration Code for two subchips currently share that secondary handler code. One is the power subchip; its IRQs are now handled by this core, courtesy of this patch. The other is the GPIO module, which will be supported through a later patch. There are also minor changes to the header file, mostly related to GPIO support; nothing yet in mainline cares about those. A few references to OMAP-specific symbols are disabled; when they can all be removed, the TWL4030 support ceases being OMAP-specific. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-19mfd: TWL4030 core driverDavid Brownell
This patch adds the core of the TWL4030 driver, which supports chips including the TPS65950. These chips are multi-function; see http://focus.ti.com/docs/prod/folders/print/tps65950.html Public specs are in the works. For now, the block diagram on the second page of the datasheet is fairly informative. There are some known issues with this core code. Most notably, the IRQ dispatching needs simplification (to use more of genirq), generalization (integrating support for secondary IRQ dispatch as well as primary, and removing the build dependency on OMAP), and then probably updating to leverage threaded IRQ support (expected to arrive in mainline "soon"). Once the core is in mainline, drivers for other parts of this chip can follow its lead and start swimming upstream too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-13mfd: Add GPIO pin configuration support for WM8350Mark Brown
The WM8350 provides a number of user-configurable pins providing access to various signals generated by the functions on the chip. These are referred to as GPIO pins in the device documentation but in Linux terms they are more general than that, providing configuration of alternate functions. This patch implements support for selecting the alternate functions for these pins. They can also be used as GPIOs in the normal Linux sense - a subsequent patch will add support for doing so. This code was all written by Liam Girdwood and has had minor updates and rearrangements by Mark Brown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-13mfd: Add I2C control support for WM8350Mark Brown
Implement the I2C control interface for the WM8350. This code was originally written by Liam Girdwood and has been updated for submission by Mark Brown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-13mfd: Core support for the WM8350 AudioPlus PMICMark Brown
The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-13mfd: Core support for the WM8400 AudioPlus HiFi CODEC and PMUMark Brown
The WM8400 is a highly integrated audio CODEC and power management unit optimised for use in mobile multimedia applications. This patch adds core support for the WM8400 to the MFD subsystem. Both I2C and SPI access are supported by the hardware but currently only I2C access is implemented. The code is structured to allow SPI support to be slotted in later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-07Merge branch 'pxa-palm' into pxa-machinesRussell King
Conflicts: drivers/mfd/Kconfig drivers/pcmcia/Makefile
2008-08-20[ARM] 5184/1: Split ucb1400_ts into core and touchscreenMarek Vašut
This patch splits ucb1400_ts into ucb1400_ts and ucb1400_core. Since this chip supports more features than only touchscreen, it was necessary to prepare it for feature addition. The previous functionality is preserved by applying this patch. [Build fixes for non-ARM by Stephen Rothwell and Takashi Iwai] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-10mfd: driver for the TC6387XB TMIO controller.Ian Molton
This patch adds support for the TC6387XB. Unlike other TMIO devices this one has only one subdevice and no interrupt mux, however using the MFD framework allows it to share the TMIO MMC driver. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-08-10mfd: driver for the T7L66XB TMIO SoCIan Molton
This patchset provides support for the core functinality of the T7L66XB SoC from Toshiba. Supported in this patchset is the IRQ MUX, MMC controller and NAND flash controller. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-07-07[ARM] 5127/1: Core MFD supportDmitry Baryshkov
This patch provides a common subdevice registration system for MFD type chips, using platfrom device. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-07[ARM] 5096/2: Support Toshiba TC6393XB Mobile I/O Controller.Dmitry Baryshkov
Add support for Toshiba TC6393XB companion chip. Currently only GPIO and part of IRQ features of the device are supported. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4964/1: htc-pasic3: MFD driver for PASIC3 LED control + DS1WM chipPhilipp Zabel
This driver will provide registers, clocks and GPIOs of the HTC PASIC3 (AIC3) and PASIC2 (AIC2) chips to the ds1wm and leds-pasic3 drivers. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4947/1: htc-egpio, a driver for GPIO/IRQ expanders with fixed ↵Philipp Zabel
input/output pins implemented in CPLD chips on several HTC devices. The original driver was written by Kevin O'Connor, I have adapted it to use gpiolib and made the bus/register widths configurable. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-07ASIC3 driverSamuel Ortiz
This is a patch for the Compaq ASIC3 multi function chip, found in many PDAs (iPAQs, HTCs...). It is a simplified version of Paul Sokolovsky's first proposal [1]. With this code, it is basically a GPIO and IRQ expander. My plan is to add more features once this patch gets reviewed and accepted. [1] http://lkml.org/lkml/2007/5/1/46 Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Cc: Paul Sokolovsky <pmiscml@gmail.com> Cc: Ben Dooks <ben@trinity.fluff.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] mfd: SM501 core driverBen Dooks
This driver provides the core functionality of the SM501, which is a multi-function chip including two framebuffers, video acceleration, USB, and many other peripheral blocks. The driver exports a number of entries for the peripheral drivers to use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2005-09-11[MFD] Add code UCB1200/UCB1300 assabet platform supportRussell King
Add support for Intel assabet specific board support for UCB1200/UCB1300 devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11[MFD] Add code UCB1200/UCB1300 touchscreen supportRussell King
Add support for Philips UCB1200 and UCB1300 touchscreen interfaces found on ARM devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11[MFD] Add code UCB1200/UCB1300 device supportRussell King
Add the core device support code for the Philips UCB1200 and UCB1300 devices. Also includes the following from Pavel: This fixes u32 vs. pm_message_t confusion and uses cleaner try_to_freeze() [fixing compilation as a side-effect on newer kernels.] Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18[MFD] Add SA11x0 MCP supportRussell King
This adds support for the MCP interface found on SA11x0 devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18[MFD] Add multimedia communication port core supportRussell King
Add support for the core of the multimedia communication port framework. This is a port used to communicate with devices with two DMA paths and a control path. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>