aboutsummaryrefslogtreecommitdiff
path: root/drivers/mfd/sm501.c
AgeCommit message (Collapse)Author
2009-01-11mfd: Ensure sm501 GPIO pin mode is GPIO when configuredBen Dooks
When setting an GPIO to either input or output, we should ensure that the pin configuration elsewhere in the chip is set to GPIO in-case the initial setup has not been done correctly. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-22mfd: check for platform_get_irq() return value in sm501Roel Kluin
sm501_devdata->irq is unsigned, while platform_get_irq() returns a signed int. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-22mfd: use pci_ioremap_bar() in sm501Arjan van de Ven
Use the newly introduced pci_ioremap_bar() function in drivers/mfd. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-19mfd: update sm501 debugging/low information messagesBen Dooks
Make the default output of the SM501 driver to be less noisy wrt to message that have low informational value, or simply should be debug. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-07-25mfd: sm501 fix gpio number calculation for upper bankBen Dooks
The sm501_gpio_pin2nr() routine returns the wrong values for gpios in the upper bank. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25mfd: sm501 build fixes when CONFIG_MFD_SM501_GPIO unsetBen Dooks
Fix the build problems if CONFIG_MFD_SM501_GPIO is not set, which is generally when there is no gpiolib support available as currently happens on x86 when building PCI SM501. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Tested-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25sm501: fixes for akpms comments on gpiolib additionBen Dooks
Fixup the comments from the patch that added the gpiolib support from Andrew Morton. These include spotting some missing frees on error or release, and changing a memcpy for a type-safe assingment. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25sm501: gpio I2C supportBen Dooks
Add support for adding the GPIO based I2C resources. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Arnaud Patard <apatard@mandriva.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25sm501: gpio dynamic registration for PCI devicesArnaud Patard
The SM501 PCI card requires a dyanmic gpio allocation as the number of cards is not known at compile time. Fixup the platform data and registration to deal with this. Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Arnaud Patard <apatard@mandriva.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25sm501: add gpiolib supportBen Dooks
Add support for exporting the GPIOs on the SM501 via gpiolib. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Arnaud Patard <apatard@mandriva.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25sm501: add power control callbackBen Dooks
Add callback to get or set the power control if the device has the sleep connected to some form of GPIO. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Arnaud Patard <apatard@mandriva.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25mfd: fix platform driver hotplug/coldplugKay Sievers
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS with "platform:"), the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the MFD platform drivers, to re-enable auto loading. [dbrownell@users.sourceforge.net: one was missing] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30drivers: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28sm501: add uart supportMagnus Damm
This patch extends the sm501 mfd with 8250 uart support. We're currently doing this in the board specific r2d-1 code already, but it would be nice to do move things into the mfd since it's more chip specific than board specific. Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04sm501: add support for the SM502 programmable PLLVille Syrjala
SM502 has a programmable PLL which can provide the panel pixel clock instead of the 288MHz and 336MHz PLLs. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Ville Syrjala <syrjala@sci.fi> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04sm501: remove a duplicated tableVille Syrjala
misc_div is a subset of px_div so eliminate the smaller table. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29MFD: SM501 debug typo fixBen Dooks
Remove errnoeous x character from dev_dbg() call that stops the driver compiling under debug. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-24SM501: Check SM501 ID register on initialisationBen Dooks
When binding the driver, check the ID register for a valid identity, in case the SM501 is not functioning correctly. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-24SM501: Clock updates and checksBen Dooks
Ensure that the M1XCLK and MCLK are sourced from the same PLL (and refuse to bind the driver if they are not). Update the PCI to safe initialisation values, as 72MHz is the maximum clock for 33MHz PCI bus mastering. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-24SM501: Fix sm501_init_reg() mask/set orderBen Dooks
The order of the set and mask operation in sm501_init_reg() was setting and then masking the bits set. Correct the order so that we do not end up with 288MHz SDRAM clocks on certain systems. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-24SM501: initialise SDRAM clock before bus clocksBen Dooks
This init sequence of setting the SDRAM clock before the bus clock is recommend by Silicon Motion to stop problems with writes not sticking into registers. Signed-off-by: Vincent Sanders <vince@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-24SM501: suspend supportBen Dooks
This patch adds support for suspending the core (mfd driver) of the SM501. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-02[PATCH] drivers/mfd/sm501.c: fix an off-by-oneAdrian Bunk
Fix an off-by-one spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-26[PATCH] drivers/mfd/sm501.c: Replace pci_module_init with pci_register_driverRichard Knutsson
Replace pci_module_init with pci_register_driver Signed-off-by: Richard Knutson <ricknu-0@student.ltu.se> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] mfd: SM501 core driverBen Dooks
This driver provides the core functionality of the SM501, which is a multi-function chip including two framebuffers, video acceleration, USB, and many other peripheral blocks. The driver exports a number of entries for the peripheral drivers to use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>