aboutsummaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2008-07-27avr32: some mmc/sd cleanupsDavid Brownell
Minor cleanups for the MMC/SD support on avr32: - Make at32_add_device_mci() properly initialize "missing" platform data ... so boards like STK1002 won't try GPIO 0. - Switch over to gpio_is_valid() instead of testing for only one designated value. - Provide STK1002 platform data for the unlikely case that switches are set so first Ethernet controller isn't in use. (That's the only way to get card detect and writeprotect switch sensing on the STK1000.) And get rid of one "unused variable" warning. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-27Merge commit 'upstream/master'Haavard Skinnemoen
2008-07-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: atmel-mci: debugfs support mmc: Add per-card debugfs support mmc: Export internal host state through debugfs imxmmc: fix crash when no platform data is provided imxmmc: fix platform resources imxmmc: remove DEBUG definition mmc_spi: put signals to low power off fix
2008-07-27atmel-mci: debugfs supportHaavard Skinnemoen
Create additional files under the host's debugfs directory containing additional host-specific debug information. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27mmc: Add per-card debugfs supportHaavard Skinnemoen
For each card successfully added to the bus, create a subdirectory under the host's debugfs root with information about the card. At the moment, only a single file is added to the card directory for all cards: "state". It reflects the "state" field in struct mmc_card, indicating whether the card is present, readonly, etc. For MMC and SD cards (not SDIO), another file is added: "status". Reading this file will ask the card about its current status and return it. This can be useful if the card just refuses to respond to any commands, which might indicate that the card state is not what the MMC core thinks it is (due to a missing stop command, for example.) Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27mmc: Export internal host state through debugfsHaavard Skinnemoen
When CONFIG_DEBUG_FS is set, create a few files under /sys/kernel/debug containing information about an mmc host's internal state. Currently, just a single file is created, "ios", which contains information about the current operating parameters for the bus (clock speed, bus width, etc.) Host drivers can add additional files and directories under the host's root directory by passing the debugfs_root field in struct mmc_host as the 'parent' parameter to debugfs_create_*. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27imxmmc: fix crash when no platform data is providedPaulius Zaleckas
Don't crash if no platform data is provided. In this case assume that card is present. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27imxmmc: fix platform resourcesPaulius Zaleckas
Fixup platform resources handling. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27imxmmc: remove DEBUG definitionPaulius Zaleckas
Removed DEBUG #define #undef, because module is automaticaly compiled with -DDEBUG when CONFIG_MMC_DEBUG is defined. Currently it just generates compiler warning about redefinition. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-26dma-mapping: add the device argument to dma_mapping_error()FUJITA Tomonori
Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER architecture does: This enables us to cleanly fix the Calgary IOMMU issue that some devices are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423). I think that per-device dma_mapping_ops support would be also helpful for KVM people to support PCI passthrough but Andi thinks that this makes it difficult to support the PCI passthrough (see the above thread). So I CC'ed this to KVM camp. Comments are appreciated. A pointer to dma_mapping_ops to struct dev_archdata is added. If the pointer is non NULL, DMA operations in asm/dma-mapping.h use it. If it's NULL, the system-wide dma_ops pointer is used as before. If it's useful for KVM people, I plan to implement a mechanism to register a hook called when a new pci (or dma capable) device is created (it works with hot plugging). It enables IOMMUs to set up an appropriate dma_mapping_ops per device. The major obstacle is that dma_mapping_error doesn't take a pointer to the device unlike other DMA operations. So x86 can't have dma_mapping_ops per device. Note all the POWER IOMMUs use the same dma_mapping_error function so this is not a problem for POWER but x86 IOMMUs use different dma_mapping_error functions. The first patch adds the device argument to dma_mapping_error. The patch is trivial but large since it touches lots of drivers and dma-mapping.h in all the architecture. This patch: dma_mapping_error() doesn't take a pointer to the device unlike other DMA operations. So we can't have dma_mapping_ops per device. Note that POWER already has dma_mapping_ops per device but all the POWER IOMMUs use the same dma_mapping_error function. x86 IOMMUs use device argument. [akpm@linux-foundation.org: fix sge] [akpm@linux-foundation.org: fix svc_rdma] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix bnx2x] [akpm@linux-foundation.org: fix s2io] [akpm@linux-foundation.org: fix pasemi_mac] [akpm@linux-foundation.org: fix sdhci] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix sparc] [akpm@linux-foundation.org: fix ibmvscsi] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26drivers/mmc/host/sdhci.h needs scatterlist.hAndrew Morton
alpha: drivers/mmc/host/sdhci.h:242: error: field 'sg_miter' has incomplete type Cc: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24mmc_spi: put signals to low power off fixJan Nikitenko
The original intention was to write a zero byte to mmc to force spi signals to low when doing power off. Somehow the spi_w8r8 call got there so a read followed the write of single zero byte. This patch changes that to simple write of zero byte without the following read. This way the power off is more reliable and completely sufficient. Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23sdhci: highmem capable PIO routinesPierre Ossman
Improve the PIO handling so that it can service highmem pages. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23mmc_test: print message when attaching to cardPierre Ossman
Make it a bit more obvious that the card has been claimed by the mmc_test driver so that people don't have to wonder why their block device never shows up. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23mmc_block: bounce buffer highmem supportPierre Ossman
Support highmem pages in the bounce buffer code by using the sg_copy_from/to_buffer() functions. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23sdhci: fix bad warning from commit c8b3e02Pierre Ossman
Commit c8b3e02 renamed a variable, but missed one reference to it inside a WARN_ON, causing it to incorrectly trigger. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23sdhci: add warnings for bad buffers in ADMA pathPierre Ossman
The ADMA code path assumes that the 3 byte alignment fix doesn't cross a page boundary. I'm not convinced this is worth supporting, but at least print a warning in the off chance we'll actually see such a request. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23mmc_test: test oversized sg listsPierre Ossman
Add tests that make sure the driver properly checks the blocks and blksz fields and doesn't assume the sg list has a size that perfectly matches the current request. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23mmc_test: highmem testsPierre Ossman
Add a couple of tests to make sure the host driver handles highmem memory pages properly. Unfortunately there is no way to guarantee an allocation below 4 GB in i386, so it might give you addresses that are out of reach for the hardware (OTOH, so will any other highmem allocation in the kernel). Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23s3cmci: ensure host stopped on machine shutdownBen Dooks
Ensure that the s3cmci host controller is turned off when the machine is shutdown, otherwise we end up leaving the card powered and processing insertion and removal events after the system prints "System halted." Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23au1xmmc: suspend/resume implementationManuel Lauss
Basic suspend/resume support: disable peripheral on suspend and reinit on resume. Tested on Au1200. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23s3cmci: fixes for section mismatch warningsBen Dooks
Fix the naming of various functions in the s3cmc driver to stop triggering section mismatch warnings. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23pxamci: trivial fix of DMA alignment register bit clearingKarl Beldan
Signed-off-by: Karl Beldan <karl.beldan@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-18avr32: clean up mci platform codeBen Nizette
This patch does a few small cleanups around the atmel mci platform code and in the atmel-mci driver. The platform changes simply removes an unused variable, uses the fact that by the end we always have some form of platform data and notes that GPIO_PIN_NONE != 0. This last point could cause the incorrect attempt to twice reserve pin PA0. While we've got the hood up, add linux/err.h to the atmel-mci.c include list. It needs it and generally pulls it by voodoo but I did once stumble across a config which don't build. This is against Linus' latest git. Signed-off-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (68 commits) sdio_uart: Fix SDIO break control to now return success or an error mmc: host driver for Ricoh Bay1Controllers sdio: sdio_io.c Fix sparse warnings sdio: fix the use of hard coded timeout value. mmc: OLPC: update vdd/powerup quirk comment mmc: fix spares errors of sdhci.c mmc: remove multiwrite capability wbsd: fix bad dma_addr_t conversion atmel-mci: Driver for Atmel on-chip MMC controllers mmc: fix sdio_io sparse errors mmc: wbsd.c fix shadowing of 'dma' variable MMC: S3C24XX: Refuse incorrectly aligned transfers MMC: S3C24XX: Add maintainer entry MMC: S3C24XX: Update error debugging. MMC: S3C24XX: Add media presence test to request handling. MMC: S3C24XX: Fix use of msecs where jiffies are needed MMC: S3C24XX: Add MODULE_ALIAS() entries for the platform devices MMC: S3C24XX: Fix s3c2410_dma_request() return code check. MMC: S3C24XX: Allow card-detect on non-IRQ capable pin MMC: S3C24XX: Ensure host->mrq->data is valid ... Manually fixed up bogus executable bits on drivers/mmc/core/sdio_io.c and include/linux/mmc/sdio_func.h when merging.
2008-07-15sdio_uart: Fix SDIO break control to now return success or an errorDavid Howells
This is a consequence of patch 9ea761bfef52c116fed4715d4043392c2503fe6a. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: host driver for Ricoh Bay1ControllersSascha Sommer
Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdio: sdio_io.c Fix sparse warningsTomas Winkler
Unfold nested macros it creates not readable code and sparse warnings sdio_io.c:190:9: warning: symbol '_min1' shadows an earlier one Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdio: fix the use of hard coded timeout value.Benzi Zbit
This adds reading and using of enable_timeout from the CIS Signed-off-by: Benzi Zbit <benzi.zbit@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: OLPC: update vdd/powerup quirk commentAndres Salomon
This comment update got lost in the great floo^Wmerge. As Pierre pointed out, no one knows what 'CaFe' is. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: fix spares errors of sdhci.cTomas Winkler
1. sdhci_prepare_data: fix shadowing of count variable u8 count int count -> sg_cnt; 2. sdhci_add_host: assignment of integer to pointer dma_mask = 0 -> dma_mask = NULL; Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: remove multiwrite capabilityPierre Ossman
Relax requirements on host controllers and only require that they do not report a transfer count than is larger than the actual one (i.e. a lower value is okay). This is how many other parts of the kernel behaves so upper layers should already be prepared to handle that scenario. This gives us a performance boost on MMC cards. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15wbsd: fix bad dma_addr_t conversionPierre Ossman
DMA addresses are not pointers, so don't treat them as such. Avoids compiler warnings when using 64-bit DMA addresses on a 32-bit system. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15atmel-mci: Driver for Atmel on-chip MMC controllersHaavard Skinnemoen
This is a driver for the MMC controller on the AP7000 chips from Atmel. It should in theory work on AT91 systems too with some tweaking, but since the DMA interface is quite different, it's not entirely clear if it's worth merging this with the at91_mci driver. This driver has been around for a while in BSPs and kernel sources provided by Atmel, but this particular version uses the generic DMA Engine framework (with the slave extensions) instead of an avr32-only DMA controller framework. This driver can also use PIO transfers when no DMA channels are available, and for transfers where using DMA may be difficult or impractical for some reason (e.g. the DMA setup overhead is usually not worth it for very short transfers, and badly aligned buffers or lengths are difficult to handle.) Currently, the driver only support PIO transfers. DMA support has been split out to a separate patch to hopefully make it easier to review. The driver has been tested using mmc-block and ext3fs on several SD, SDHC and MMC+ cards. Reads and writes work fine, with read transfer rates up to 3.5 MiB/s on fast cards with debugging disabled. The driver has also been tested using the mmc_test module on the same cards. All tests except 7, 9, 15 and 17 succeed. The first two are unsupported by all the cards I have, so I don't know if the driver handles this correctly. The last two fail because the hardware flags a Data CRC Error instead of a Data Timeout error. I'm not sure how to deal with that. Documentation for this controller can be found in many data sheets from Atmel, including the AT32AP7000 data sheet which can be found here: http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: fix sdio_io sparse errorsTomas Winkler
This patch fixes sdio_io sparse errors. This fix changes signature of API functions, changing unsigned char -> u8 unsigned short -> u16 unsigned long -> u32 - this was probably a bug in 64 bit platforms Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: wbsd.c fix shadowing of 'dma' variableTomas Winkler
This patch fix warning :shadowing dma variable and made use of module_param_named instead of module_param Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15MMC: S3C24XX: Refuse incorrectly aligned transfersBen Dooks
The hardware does not support any multi-block transfers with an block-size that is not 32bit aligned. Also the driver itself does not support single block non-32bit transfers either. Ensure that the s3cmci_setup_data() returns the appropriate error if we encounter this. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15MMC: S3C24XX: Update error debugging.Ben Dooks
Add better debugging to show where errors are being generated, as some error codes can come from several different code paths. Also fix the error return path from s3cmci_setup_data() to return the error it returned to the request. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15MMC: S3C24XX: Add media presence test to request handling.Ben Dooks
Ensure that we have physical media present before attempting to send a request to a card. This ensures that we do not get flooded by errors from commands that can never be completed timing out. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15MMC: S3C24XX: Fix use of msecs where jiffies are neededBen Dooks
mmc_detect_change() takes jiffies, not msecs. Convert the previous value of msecs into jiffies before calling. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15MMC: S3C24XX: Add MODULE_ALIAS() entries for the platform devicesBen Dooks
Add MODULE_ALIAS() declerations for all the supported platform devices for this driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15MMC: S3C24XX: Fix s3c2410_dma_request() return code check.Ben Dooks
The driver should be checking for a negative error code from s3c2410_dma_request(), not non-zero. Newer kernels now return the DMA channel number that was allocated by the request. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15MMC: S3C24XX: Allow card-detect on non-IRQ capable pinBen Dooks
Add support to the S3C24XX MMC driver to have the card detect be on a pin that is not IRQ capable. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15MMC: S3C24XX: Ensure host->mrq->data is validBen Dooks
Fix a crash if host->mrq->data is NULL on ending a transfer. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15MMC: S3C24XX: Add support to invert write protect lineBen Dooks
Support for inverting the sense of the MMC driver's write protect detection line. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15MMC: S3C24XX: Add platform data for MMC/SD driverBen Dooks
This patch adds platform data support to the s3mci driver. This allows flexible board-specific configuration of set_power, card detect and read only pins. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15MMC: Fix S3C24XX IRQ enable during PIO transfersRoman Moracik
Fix Bug #677 - I/O errors on heavy microSD writes for 2.6.22.x. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15Fix the request finalisation by ensuring the controllerThomas Kleffel
is stopped. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Harald Welte <laforge@openmoko.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15MMC: DMA free fix for S3C24XX SD/MMC driverHarald Welte
Bugfix to ensure DMA channel allocated is freed on exit. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15MMC: S3C24XX MMC/SD driver write fixesHarald Welte
This patch is a workaround of some S3C2410 MMC chip bug Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 18:00:38 +0000