| Age | Commit message (Collapse) | Author |
|---|
|
pending-tracking-hist top was this-patch-gets-the-linux-mci- / f45f6d893a0dc65a6041a2c0127e9970427a85da ... parent commitmessage:
From: Balaji Rao <balajirrao@openmoko.org>
This patch gets the Linux mci stack to use the voltage it negotiated before
with the uSD card on resume. Without this, it always reverts to and stays at
3.3V.
Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
|
|
hes-tracking-MERGE-via-master-MERGE-via-master-hist-1229078937-1229079488-1229082516-1229082771
pending-tracking-hist top was MERGE-via-stable-tracking-MERGE-via-mokopatches-tracking-MERGE-via-master-MERGE-via-master-hist-1229078937-1229079488-1229082516-1229082771 / f410ecd0cc4642ae8b0f69c15fe349ea5639f5e2 ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-stable-tracking-hist-MERGE-via-mokopatches-tracking-MERGE-via-master-MERGE-via-master-hist-1229078937-1229079488-1229082516
stable-tracking-hist top was MERGE-via-mokopatches-tracking-MERGE-via-master-MERGE-via-master-hist-1229078937-1229079488-1229082516 / 18f9a76ecc30ba8eee5de0627de3e7eb049775c3 ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-mokopatches-tracking-hist-MERGE-via-master-MERGE-via-master-hist-1229078937-1229079488
mokopatches-tracking-hist top was MERGE-via-master-MERGE-via-master-hist-1229078937-1229079488 / 7eb66508f95eeebbd7ad3487c5183b76524d4765 ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-master-MERGE-via-master-hist-1229078937
master top was MERGE-via-master-hist-1229078937 / ff0b5902f29135a782a3bfb68e3429b86669aea4 ... parent commitmessage:
From: merge <null@invalid>
MERGE-master-patchset-edits
|
|
This provides a way for code to force a mmc rescan by using the s3c hsmmc
platform device as a handle. It solves the issue of 6410 having two
card detect signals mutually exclusive on one physical ball.
Ben Dooks told he might implement this another way but we need this on GTA03
right now and can migrate it to any official way that turns up.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
plevel-patch
balaji-tracking-hist top was MERGE-via-stable-tracking-hist-config-gta02-uplevel-patch / eb381acecca375d0a7b88cfe640504a8a1fa4c39 ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-stable-tracking-hist-config-gta02-uplevel-patch
stable-tracking-hist top was config-gta02-uplevel-patch / 0e07e39074bbdb938cfefaea6ad7823282cc914c ... parent commitmessage:
From: Andy Green <andy@openmoko.com>
config-gta02-uplevel.patch
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
patches-tracking-via-master-s3c-hsmmc-clean
balaji-tracking-hist top was efb2d57c0e0ed62324d79d6c5793fe797c157266
|
|
When compiling s3cmci as a module and doing an insmod-rmmod-insmod
sequence, s3cmci_probe often oopses because the platform data contains
garbage.
The reason for this is that I'm not providing any platform data (removed
in gta02-mmc-mci.patch), and thus s3cmci tries to put its own defaults:
if (!host->pdata) {
pdev->dev.platform_data = &s3cmci_def_pdata;
host->pdata = &s3cmci_def_pdata;
}
s3cmci_def_pdata is inside the module, so the pointer in
pdev->dev.platform_data becomes invalid after the module is unloaded.
Since nothing else in s3cmci uses pdev->dev.platform_data, "patching"
it seems unnecessary. This patch removes it.
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
Oops ! It compiled file as non-module, but not as module.
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
This patch adds the module parameter f_max to s3cmci to limit the
maximum clock frequency of the SD interface.
E.g., when booting with s3cmci.f_max=10000000, the kernel should say
s3c2440-sdi s3c2440-sdi: f_max lowered from 50000000 to 10000000 Hz
and the interface frequency should be limited accordingly.
Setting the limit above the maximum frequency supported by the card
or the interface has no effect, so the option is ignored (and no
"f_max lowered" line is printed).
Setting the limit below the minimum frequency supported by the
interface sets it to that frequency.
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
christer-mmc-byte-alignment.patch reduced the FIFO I/O granularity
from words to bytes. This also includes the decision when the FIFO
is empty or full.
However, we sometimes only want to transfer full words, in which
case do_pio_read/do_pio_write busy-loop until the FIFO has filled
up or drained enough.
In the case of do_pio_write, this can cause an endless loop if the
amount of data exceeds the FIFO size, because do_pio_write runs
before the transfer is initiated, so the FIFO never drains.
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
This pulls the Moko changes to regs-sdi.h that were in
include/asm-arm/arch-s3c2410 over to the file at arch/arm/../mach and
deletes the file at include/asm-arm.
Note: we have been using a mix of regs-sdi.h from the two different
locations. The unification of these two files may have some unknown
consequences... keep your eyes open for oddities after applying this.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
After the big include file move these paths ended up incorrect. Fix
these so that this builds cleanly again.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This is a MMC/SD driver for the Samsung S3C24xx SD/MMC controller, originally
developed years ago by Thomas Kleffel <tk@maintech.de>.
Due to time restraints, he had no time to further maintain the driver and
follow the mainline Linux changes in the SD/MMC stack.
With his authorization, I have taken over the task of making it compliant to
the current mainline SD/MMC API and take care of the mainline kernel merge.
After a potential kernel inclusion, we would co-maintain the driver.
Acked-by: Thomas Kleffel <tk@maintech.de>
Signed-off-by: Harald Welte <laforge@gnumonks.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into rmk-next
|
|
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
It seems that some cards are slightly out of spec and occasionally
will not be able to complete a write in the alloted 250 ms [1].
Incease the timeout slightly to allow even these cards to function
properly.
[1] http://lkml.org/lkml/2008/9/23/390
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
Add a change_clock callback to allow drivers to update
device specific clock selections and control registers
when there is a change in clock.
Move the main part of sdhci_set_clock() to a new routine
which can be called by the glue drivers to do the sdhci
standard clock management.
Update the sdhci-s3c driver to use this to select the
appropriate clock source when clocks change.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
At the end of a transfer, check that the DMA engine in the
SDHCI controller actually did what it was meant to and didn't
overrun the end of the buffer.
This seems to be triggered by a timeout during an CMD25 (multiple block
write) to a card. The mmc_block module then issues a command to find out
how much data was moved and this seems to end up triggering this DMA
check. The result is the card's queue generates an OOPS as the stack has
been trampled on due to the extra data transfered.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Add support for the 'HSMMC' block(s) in the Samsung SoC
line. These are compatible with the SDHCI driver so add
the necessary setup and driver binding for the platform
devices.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
The Samsung SDHCI controller block seems to fail to generate an
INT_DATA_END after the transfer has completed and the bus busy
state finished.
Changes in e809517f6fa5803a5a1cd56026f0e2190fc13d5c to use the
new busy method are the cause of the behaviour change.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Add a set_ios hook which is called when the SDHCI driver
is called to change parameters such as clock or card
width.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
If using ADMA, then we should print the ADMA error
and current pointer in sdhci_dumpregs() when any
debug is requested.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Some controllers do not provide clock information in their
capabilities (in the Samsung case, it is because there are
multiple clock sources available to the controller). Add hooks
to allow the system to supply clock information.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into s3c64xx
|
|
Move mci.h to new position in arch/arm/plat-s3c24xx/include/plat
ready to clean out old include directories.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Fix fastpath issues
Since mmci_request() can be called from a non-interrupt
context, and does, during kernel init, causing a host
of debug messages during boot if you enable spinlock debugging,
we need to use the spinlock calls that save IRQ flags and
restore them.
Signed-off-by: Linus Walleij <triad@df.lth.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
To keep the size of changesets sane we split the switch by drivers;
to keep the damn thing bisectable we do the following:
1) rename the affected methods, add ones with correct
prototypes, make (few) callers handle both. That's this changeset.
2) for each driver convert to new methods. *ALL* drivers
are converted in this series.
3) kill the old (renamed) methods.
Note that it _is_ a flagday; all in-tree drivers are converted and by the
end of this series no trace of old methods remain. The only reason why
we do that this way is to keep the damn thing bisectable and allow per-driver
debugging if anything goes wrong.
New methods:
open(bdev, mode)
release(disk, mode)
ioctl(bdev, mode, cmd, arg) /* Called without BKL */
compat_ioctl(bdev, mode, cmd, arg)
locked_ioctl(bdev, mode, cmd, arg) /* Called with BKL, legacy */
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
s3cmci: Add Ben Dooks/Simtec Electronics to header & copyright
s3cmci: fix continual accesses to host->pio_ptr
s3cmci: Support transfers which are not multiple of 32 bits.
s3cmci: cpufreq support
s3cmci: Make general protocol errors less noisy
mmc_block: tell block layer there is no seek penalty
|
|
Conflicts:
arch/arm/mach-versatile/core.c
|
|
Since the original authour (Thomas Kleffel) has been too busy to
merge the s3cmci driver and keep it up to date, I (mostly as part
of my role with Simtec Electronics) got the driver to a mergable
state and have been maintaining it since I think that I should
be added to the header. Also add a copyright statement for the
new work.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
The s3cmci driver uses the host->pio_ptr field to
point to the current position into the buffer for data
transfer. During the transfers it does the following:
while (fifo_words--)
*(host->pio_ptr++) = readl(from_ptr);
This is inefficent, as host->pio_ptr is not used in any
other part of the transfer but the compiler emits code
which does the following:
while (fifo_words--) {
u32 *ptr = host->pio_ptr;
*ptr = readl(from_ptr);
ptr++;
host->pio_ptr = ptr;
}
This is obviously a waste of a load and store each time
around the loop, which could be up to 16 times depending
on how much needs to be transfered.
Move the ptr accesses to outside the while loop so that
we do not end up reloading/re-writing the pointer.
Note, this seems to make the code 16 bytes larger.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
To be able to do SDIO the s3cmci driver has to support non-word-sized
transfers. Change pio_words into pio_bytes and fix up all the places
where it is used.
This variant of the patch will not overrun the buffer when reading an
odd number of bytes. When writing, this variant will still read past
the end of the buffer, but since the driver can't support non-word-
aligned transfers anyway, this should not be a problem, since a
word-aligned transfer will never cross a page boundary.
This has been tested with a CSR SDIO Bluetooth Type A device on a
Samsung S3C24A0 processor.
Signed-off-by: Christer Weinigel <christer@weinigel.se>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
Support for cpu frequency changing.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
General errors, such as timeouts during probe do not need to
be sent to the console, so move them down to be included if the
debug is enabled.
Such errors include:
s3c2440-sdi s3c2440-sdi: s3cmci_request: no medium present
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
Conflicts:
arch/arm/mach-versatile/core.c
|
|
Conflicts:
arch/arm/mach-omap2/gpmc.c
arch/arm/mach-omap2/irq.c
|
|
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
include/asm-x86/statfs.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (24 commits)
MMC: Use timeout values from CSR
MMC: CSD and CID timeout values
sdhci: 'scratch' may be used uninitialized
mmc: explicitly mention SDIO support in Kconfig
mmc: remove redundant "depends on"
Fix comment in include/linux/mmc/host.h
sdio: high-speed support
mmc_block: hard code 512 byte block size
sdhci: force high speed capability on some controllers
mmc_block: filter out PC requests
mmc_block: indicate strict ordering
mmc_block: inform block layer about sector count restriction
sdio: give sdio irq thread a host specific name
sdio: make sleep on error interruptable
sdhci: reduce card detection delay
sdhci: let the controller wait for busy state to end
atmel-mci: Add missing flush_dcache_page() in PIO transfer code
atmel-mci: Don't overwrite error bits when NOTBUSY is set
atmel-mci: Add experimental DMA support
atmel-mci: support multiple mmc slots
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/atmel-mci-2.6.28
Conflicts:
drivers/mmc/host/atmel-mci.c
|
|
Hard-coded timeout values of 250ms for writes and 100ms for reads are
currently used for MMC transactions over SPI. The spec states that the
timeout values from the card should be used.
Signed-off-by: Matthew Fleming <matthew.fleming@imgtec.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
The MMC spec states that the timeout for accessing the CSD and CID
registers is 64 clock cycles.
Signed-off-by: Matthew Fleming <matthew.fleming@imgtec.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
The variable 'scratch' is always initialized before it's used. The
conditional which is responsible for initialization of 'scratch' will
always evaluate 'true' when the first loop iteration occurs, and thus,
it's properly initialized. GCC doesn't see this, of course, so using
the uninitialized_var() macro seems to work for silencing this case.
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
We use 512 byte blocks on all cards, and newer cards support nothing
else, so hard code it and make the code less complex.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
Some high speed capable controllers forget to set the high speed
capability bit. Make sure we enable the functionality anyway.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
