aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/pxa3xx_nand.c
AgeCommit message (Collapse)Author
2009-04-06Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (53 commits) [MTD] struct device - replace bus_id with dev_name(), dev_set_name() [MTD] [NOR] Fixup for Numonyx M29W128 chips [MTD] mtdpart: Make ecc_stats more realistic. powerpc/85xx: TQM8548: Update DTS file for multi-chip support powerpc: NAND: FSL UPM: document new bindings [MTD] [NAND] FSL-UPM: Add wait flags to support board/chip specific delays [MTD] [NAND] FSL-UPM: add multi chip support [MTD] [NOR] Add device parent info to physmap_of [MTD] [NAND] Add support for NAND on the Socrates board [MTD] [NAND] Add support for 4KiB pages. [MTD] sysfs support should not depend on CONFIG_PROC_FS [MTD] [NAND] Add parent info for CAFÉ controller [MTD] support driver model updates [MTD] driver model updates (part 2) [MTD] driver model updates [MTD] [NAND] move gen_nand's probe function to .devinit.text [MTD] [MAPS] move sa1100 flash's probe function to .devinit.text [MTD] fix use after free in register_mtd_blktrans [MTD] [MAPS] Drop now unused sharpsl-flash map [MTD] ofpart: Check name property to determine partition nodes. ... Manually fix trivial conflict in drivers/mtd/maps/Makefile
2009-03-20[MTD] [NAND] pxa3xx_nand: add ability to keep controller settings defined by ↵Mike Rapoport
OBM/bootloader Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-20[MTD] [NAND] pxa3xx_nand: allow building as moduleMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-20[MTD] [NAND] pxa3xx_nand: use resource_size instead of 'r->end - r->start + 1'Mike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-09[ARM] pxa: move DMA registers definitions into <mach/dma.h>Eric Miao
1. Driver code where pxa_request_dma() is called will most likely reference DMA registers as well, and it is really unnecessary to include pxa-regs.h just for this. Move the definitions into <mach/dma.h> and make relevant drivers include it instead of <mach/pxa-regs.h>. 2. Introduce DMAC_REGS_VIRT as the virtual address base for these DMA registers. This allows later processors to re-use the same IP while registers may start at different I/O address. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-05[MTD] [NAND] pxa3xx: convert from ns to clock ticks more accuratelyMatt Reimer
The various fields in NDTR{01} are in units of clock ticks minus one, but the ns2cycle macro mistakenly adds one, inflating the number of clock ticks and making it impossible to set any of these fields to zero. Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-05[MTD] [NAND] pxa3xx: fix non-page-aligned readsMatt Reimer
Reads from non-page-aligned addresses were broken because while the address to read from was correctly written to NDCB*, a full page was always read. Fix this by ignoring the column and only using the page address. I suspect this whole-page behavior is due to the controller's need to read the entire page in order to generate correct ECC. In the non-ECC case this could be optimized to use the column address, and to set the read length to what is being requested rather than the length of an entire page. Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-15Merge branch 'omap3-upstream' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2008-12-03[MTD] [NAND] fix OOPS accessing flash operations over STM flash on PXADenis V. Lunev
STM 2Gb flash is a large-page NAND flash. Set operations accordingly. This field is dereferenced without a check in several places resulting in OOPS. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Eric Miao <ymiao3@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-02Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel Conflicts: arch/arm/mach-pxa/pxa25x.c
2008-12-02[ARM] pxa: explicit #include <mach/dma.h> in various driversEric Miao
Where 'pxa_dma_desc' and 'pxa_{request,free}_dma' are referenced. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-27[ARM] pxa: don't pass a consumer clock name for devices with unique clocksRussell King
Where devices only have one consumer, passing a consumer clock ID has no real benefit. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-01[MTD] [NAND] pxa3xx_nand: added warning which tells id of detected NANDEnrico Scholz
Minor patch to help debugging of NAND detection. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-01[MTD] [NAND] pxa3xx_nand: moved some helper variables out from platform dataEnrico Scholz
This patch moves some attributes out from the platform data into the dynamically created nand device. This results into a cleaner interface and allows to use constant pxa3xx_nand_flash definitions. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-01[MTD] [NAND] pxa3xx_nand: added some 'const' annotations to the exported APIEnrico Scholz
This patch marks some attributes as 'const' which are set only once and never be modified by the driver. There are some changes in parameter list and variable declarations too which mark them as 'const'. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-01[MTD] [NAND] pxa3xx_nand: allow to disable builtin flash-type tableEnrico Scholz
This patch adds a MTD_NAND_PXA3xx_BUILTIN configuration variables which allows to disable usage of builtin flash-type table. Not enabling this option saves some space in the generated driver. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-01[MTD] [NAND] pxa3xx_nand: allow to define flash types in the platform dataEnrico Scholz
This patch adds 'flash' and 'num_flash' attributes to the platform data. There was added code in the driver to iterate across these attributes in the detect-flash routine. This is done similarly to the existing method which uses a 'builtin_flash_types' field. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-01[MTD] [NAND] pxa3xx_nand: moved nand definitions into shared platform headerEnrico Scholz
This patch moves the exported datastructures from the pxa3xx_nand.c driver into the <mach/pxa3xx_nand.h> header. This is a plain movement without any modification of the attributes. This is the first one of a set of patches which: * allows to specify used NAND flash in the platform code and allows to turn off the old way to specify NAND characteristics in the driver. This way did not worked well as these characteristics depend on the platform and can not be derived from NAND id alone. E.g. some NAND chips share the same ID (e.g. K9K8G08U0A and K9NBG08U5A) but have different timings (which are written in the common driver currently and must be modified there). * adds 'const' annotations at various places Further patches will be sent to the mtd-list. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-01[MTD] [NAND] pxa3xx_nand_flash: Add definition of STM2GbX16 NAND flashesSemun Lee
Signed-off-by: Semun Lee <semun.lee@samsung.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-04[MTD] [NAND] pxa: fix incorrect calling of pxa3xx_nand_config() on resume pathEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NAND] Fix checkpatch errors in pxa3xx_nandDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NAND] support for pxa3xxeric miao
This is preliminary since: 1. It supports only _one_ chip select at the moment. As there is no existing platforms available using two chip selects of the NAND controller, it shall really not include code for supporting the 2nd chip select for now, as such code cannot be verified. 2. It resorts to the default and simpliest memory based badblock table 3. Only limited types of nand flash are currently supported. Most PXA3xx processors come with on-chip NAND flash dies, so there isn't much flexibility for other types of NAND. 4. The NAND controller should be configured to detect the device's ID, thus making it difficult to use nand_scan_ident() to assist the detection process (though it's not impossible) TODO: fix all the above limitations of cuz :-) Signed-off-by: eric miao <eric.miao@marvell.com> Cc: Sergey Podstavin <spodstavin@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>