aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd/nand
AgeCommit message (Collapse)Author
2005-11-17[ARM] Drivers should not make use of architecture private __ioremapRussell King
__ioremap is an architecture private interface and must not be used by drivers when the architecture independent interface will do just as well. Switch the ipaq drivers to use the correct interface. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-11Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds
2005-11-09[DRIVER MODEL] Convert platform drivers to use struct platform_driverRussell King
This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-09[PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reasonOlaf Hering
This patch removes almost all inclusions of linux/version.h. The 3 #defines are unused in most of the touched files. A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is unfortunatly in linux/version.h. There are also lots of #ifdef for long obsolete kernels, this was not touched. In a few places, the linux/version.h include was move to where the LINUX_VERSION_CODE was used. quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'` search pattern: /UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07Merge master.kernel.org:/pub/scm/linux/kernel/git/tglx/mtd-2.6Linus Torvalds
Some manual fixups for clashing kfree() cleanups etc.
2005-11-07[PATCH] kfree cleanup: drivers/mtdJesper Juhl
This is the drivers/mtd part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in drivers/mtd/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Joern Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[MTD] NAND: Clean up trailing white spacesThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07[MTD] NAND Kconfig: Simplify dependenciesThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07[MTD] NAND: nand_write_ecc memory and OOB corruptionTodd Poynor
Nathan Roberts noticed the nand_write_ecc index into oobbuf goes out of bounds when crossing an erase block boundary, causing incorrect OOB data to be written and corrupting memory. Reset the index to zero after re-preparing oobbuf for a new erase block. Signed-off-by: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07[MTD] NAND nand_base: Fix shift for bad block check (16bit devices only)Vitaly Wool
In case of an odd offset, the result was shifted by 1 instead of 8 Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] NAND sharpsl.c: Add support for akita and borzoi modelsRichard Purdie
The Sharp Zaurus akita and borzoi models are large page flash devices. This patch adds support for them to the sharpsl MTD NAND driver but keeps the oob layout and bad block positions compatible with the Sharp Zaurus 2.4 kernel and ROM bootloader. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] NAND s3c2410.c: Fix timing calculation bugsBen Dooks
Spotted by basprog@mail.ru Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] NAND s3c2410.c: Fix missing dev parameter to dev_errBen Dooks
Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] NAND: s3c2410.c Initialize owner in device_driver structBen Dooks
Added owner fields to the device_driver for tracking ownership when built as a module Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] NAND: s3c2410 use dev_err() to report errors instead of printk()Ben Dooks
Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] NAND: Alchemy board driver cleanupPete Popov
- cleaned up the partitions and include files - added more flexible CS and address detection and setup Regression tested on db1200 and db1550. Signed-off-by: Pete Popov <ppopov@pacbell.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] NAND: Add suspend/resume functionalityVitaly Wool
The changes introduced allow to suspend/resume NAND flash. A new state (FL_PM_SUSPENDED) is introduced, as well as routines for mtd->suspend and mtd->resume to put the flash in suspended state from software pov. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] NAND: Use correct mask for OOB size calculationThomas Gleixner
The bit mask used for oob size calculation was using 2 bits instead of one. Fortunately the next bit has been 0 all the time. Thanks to Nathan H. for pointing this out Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-10-31Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds
Manual #include fixups for clashes - there may be some unnecessary
2005-10-30[PATCH] fix missing includesTim Schmielau
I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29Create platform_device.h to contain all the platform device details.Russell King
Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-29[ARM] Don't include mach-types.h unnecessarilyRussell King
It's pointless to include mach-types.h if you're not going to use anything from it. These references were removed as a result of: grep -lr 'asm/mach-types\.h' . | xargs grep -L 'machine_is_\|MACH_TYPE_\|MACHINE_START\|machine_type' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-17[PATCH] MTD: Update SharpSL partition definitionsRichard Purdie
Add partition definitions for the new Sharp Zaurus models Spitz (SL-C3000), Akita (SL-C1000) and Borzoi (SL-C3100) Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] detect soft lockupsIngo Molnar
This patch adds a new kernel debug feature: CONFIG_DETECT_SOFTLOCKUP. When enabled then per-CPU watchdog threads are started, which try to run once per second. If they get delayed for more than 10 seconds then a callback from the timer interrupt detects this condition and prints out a warning message and a stack dump (once per lockup incident). The feature is otherwise non-intrusive, it doesnt try to unlock the box in any way, it only gets the debug info out, automatically, and on all CPUs affected by the lockup. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-16[MTD] NAND: Fix broken bad block scan for 16 bit devicesThomas Gleixner
The previous change to read a single byte from oob breaks the bad block scan on 16 bit devices, when the byte is on an odd address. Read the complete oob for now. Remove the unused arguments from check_short_pattern() Move the wait for ready function so it is only executed when consecutive reads happen. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-07-06[MTD] NAND s3c2410: Add missing NULL pointer checkBen Dooks
Fix OOPs if there was no platform set information passed Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-07-06[MTD] NAND: Remove unmaintained tx49xx board driversThomas Gleixner
The drivers are unmaintained since long and reference include files which are not available in the kernel. Original author is not longer responsible and no new maintainer showed up within 3 month. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-07-06[MTD] NAND: sharpsl.c set correct file permissionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-06-29[MTD] NAND: Add ST chip IDs. Thomas Gleixner
From: Domenico DI TULLIO <domenico.di-tullio@st.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-06-29[MTD] NAND: s3c24xx updatesBen Dooks
Fix error in timing generation, Tacls is only in the range 0..3 Add proper support for the s3c2440 NAND controller, which has now been tested on several s3c2440 implementations. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-06-29[MTD] NAND: Change exports to _GPLThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-06-29[MTD] NAND: Fix broken bad block table scanThomas Gleixner
Make the bad block table search functional again Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-06-29[MTD] NAND: Reorganize chip lockingThomas Gleixner
The code was wrong in several aspects. The locking order was inconsistent, the device aquire code did not reset a variable after a wakeup and the wakeup handling was not working for applications where multiple chips are sharing a single hardware controller. When a hardware controller is available the locking is now reduced to the hardware controller lock and the waitqueue is moved to the hardware controller structure in order to avoid a wake_up_all(). The problem was pointed out by Ben Dooks, who also found the missing variable reset as main cause for his deadlock problem. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-27[MTD] NAND: Add Hynix to manufacturer listNicolas S. Dade
Signed-off-by: Nicolas S. Dade <daden@symbol.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Honour autoplacement schemes supplied by the callerThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Fix the broken dynamic array allocationsJarkko Lavinen
Reverting the change from 1.136 to 1.137 (back to static allocation of ecc arrays) due to stack corruption and ecc errors. Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] DiskOnChip: Add some commentsDan Brown
Add helpful comment about oobfree so I can't claim two years from now that I don't remember what I was thinking. Signed-off-by: Dan Brown <dan_brown@ieee.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] DiskOnChip: Fix compile w/o CONFIG_MTD_PARTITIONS.Dan Brown
Signed-off-by: Dan Brown <dan_brown@ieee.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] DiskOnChip: Prevent problems with existing filesystemsDan Brown
Try not to break existing jffs2 installs, instead break oobfree into two out-of-order pieces. Signed-off-by: Dan Brown <dan_brown@ieee.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Fix reading of autoplaced OOB when there are multiple free sections.Dan Brown
Signed-off-by: Dan Brown <dan_brown@ieee.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] DiskOnChip: Fix (?) free OOB array info.Dan Brown
I really hope this doesn't break something. Signed-off-by: Dan Brown <dan_brown@ieee.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Move the NULL check into the calling functionThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Fix missing NULL pointer checkDan Brown
Version 1.137 broke nand_read_ecc clients who pass NULL oobsel. Fixed. Signed-off-by: Dan Brown <dan_brown@ieee.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Fix oob available calculationThomas Gleixner
Use oobfree to calculate the number of oob bytes available for fs usage Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] DiskOnChip: Scan the entire device for Media Headers. Dan Brown
Add a new module param, show_firmware_partition. Signed-off-by: Dan Brown <dan_brown@ieee.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Use arrays of needed size instead of constant-sized.Artem B. Bityuckiy
Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND nandsim: Use NAND_SKIP_BBT optionArtem B. Bityuckiy
Use the new NAND_SKIP_BBT option instead of defining a fake scan_bbt handler. Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND s3c2410: Simplify command handlingBen Dooks
Updated with tglx's suggestion to simply the command invocation by simply changing the address of the IO write area Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Fixed unused loop variableBen Dooks
Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Use cond_resched instead of msleepThomas Gleixner
Replace msleep by cond_resched. On machines with HZ=100 (e.g. ARM) msleep slows down the operation by factor 10 Signed-off-by: Thomas Gleixner <tglx@linutronix.de>