aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2006-10-02[MTD] Cleanup of 'ioremap balanced with iounmap for drivers/mtd subsystem'Amol Lad
Updated version of patch, in response to comments from Francois Romieu <romieu@fr.zoreil.com> Remove gratuitous casts from iounmap and initialisation of variables. Signed-off-by: Amol Lad <amol@verismonetworks.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-10-02[MTD] fix nftl_write warningFrederik Deweerdt
Building 2.6.18-mm2 issues the following warning if CONFIG_NFTL_RW is not set: CC [M] drivers/mtd/nftlcore.o drivers/mtd/nftlcore.c:183: warning: 'nftl_write' defined but not used The following patch only compiles nftl_write if CONFIG_NFTL_RW is set. Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-10-01[MTD] fix printk warningJeff Garzik
gcc spits out this warning: drivers/mtd/mtd_blkdevs.c: In function ‘do_blktrans_request’: drivers/mtd/mtd_blkdevs.c:72: warning: format ‘%ld’ expects type ‘long int’, but argument 2 has type ‘unsigned int’ This could be fixed any number of ways, including use of BUG(). rq_data_dir() only returns 0 or 1, so this entire case is superfluous. I did the most simple fix. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-10-01Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Manually resolve conflict in include/mtd/Kbuild Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-30[PATCH] BLOCK: Make it possible to disable the block layer [try #6]David Howells
Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30[PATCH] Split struct request ->flags into two partsJens Axboe
Right now ->flags is a bit of a mess: some are request types, and others are just modifiers. Clean this up by splitting it into ->cmd_type and ->cmd_flags. This allows introduction of generic Linux block message types, useful for sending generic Linux commands to block devices. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-26[MTD ONENAND] Check OneNAND lock scheme & all block unlock command supportKyungmin Park
OneNAND lock scheme depends on density and process of chip. Some OneNAND chips support all block unlock Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-26[MTD ONENAND] Remove unused MTD_ONENAND_SYNC_READ configurationKyungmin Park
Now the bootloader configures the OneNAND sync. burst mode. So we don't access Sync. burst mode related registers in kernel. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-26[MTD ONENAND] Fix OneNAND probeKyungmin Park
- fix OneNAND probe whether OneNAND Sync. Burst read mode or not - fix OneNAND reset wait problem Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-25[MTD NAND] Allow override of page read and write functions.David Woodhouse
- allow high-level nand_write_page() function to be overridden - likewise low-level write_page_raw() and read_page_raw() functions - Clean up the abuse of chip->ecc.{write,read}_page() with MTD_OOB_RAW Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-25[MTD NAND] Allocate chip->buffers separately to allow it to be overriddenDavid Woodhouse
In particular, the board driver might need it to be DMAable. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-25[MTD NAND] Split nand_scan() into two parts; allow board driver to interveneDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-25[MTD NAND] Export nand_wait_ready() for use by board driversDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-23[MTD] Whitespace cleanup in SSFDC driver.David Woodhouse
Says akpm: ' - search for "( " and " )", fix.' Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-23[MTD] SSFDC translation layer minor cleanupDavid Woodhouse
Don't include <linux/config.h>. Don't say 'MB' where you mean 'MiB'. Don't allocate 512 bytes on the stack. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-23[MTD] Fix dependencies with CONFIG_MTD=mDavid Woodhouse
CMDLINEPARTS shouldn't be selectable, and neither should SSFDC, which can be a tristate anyway. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22Revert "[MTD] blkdev helper code: fix printk format warning"David Woodhouse
This reverts commit 668040fcd1e06fc3e68a92708cbdfa5a52c37d3c. The 'flags' field of the struct request is 'unsigned long'. Quite how Randy came to see 'long int format, different type arg' I don't know, but it doesn't seem to be the case any more. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] Add SSFDC (SmartMedia) read-only translation layerClaudio Lanconelli
Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] pmc551 pci cleanupJiri Slaby
Use pci_resource_start for getting start of regions and pci_iomap to not doing this directly by using dev->resource... (Thanks to Rolf Eike Beer) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] pmc551 use kzallocJiri Slaby
Use kzalloc instad of kmalloc+memset(0). Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] pmc551 whitespace cleanupJiri Slaby
Spaces were used for indent, there was more than 80 columns per line. Get rid of that stuff. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] Remove iq80310 map driverLennert Buytenhek
The iq80310 mtd map driver depends on ARCH_IQ80310, which isn't defined anywhere in the tree (as we don't have 80310 support), and furthermore, everything the driver does can be done with physmap instead. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD NAND] Fix in typo ndfc.c causing wrong ECC layoutFrank Haverkamp
Due to this typo, a wrong ECC layout table is chosen. Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] physmap: add power management supportLennert Buytenhek
Implement PM handling for physmap. Idea from Steven Scholz, patch by David Anders. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22ioremap balanced with iounmap for drivers/mtd subsystemAmol Lad
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Tested (compilation only) with: - allmodconfig - Modifying drivers/mtd/maps/Kconfig and drivers/mtd/nand/Kconfig to make sure that the changed file is compiling without warning Signed-off-by: Amol Lad <amol@verismonetworks.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] Switch to pci_get_device and do ref countingAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] blkdev helper code: fix printk format warningRandy Dunlap
Fix printk format warning(s): drivers/mtd/mtd_blkdevs.c:72: warning: long int format, different type arg (arg 2) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] Fix ixp4xx partition parsing.Brian Walsh
If the amount of flash is not divisible by 2 then the mask in parse_mtd_partitions would fail to work as designed. Passing in the base address corrects this problem. Signed-off-by: Brian Walsh <brian@walsh.ws> Cc: Deepak Sanexa <dsanexa@mvista.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD NAND] Remove old code in au1550nd.cMichal Piotrowski
Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] Unlock NOR flash automatically where necessaryHåvard Skinnemoen
Introduce the MTD_STUPID_LOCK flag which indicates that the flash chip is always locked after power-up, so all sectors need to be unlocked before it is usable. If this flag is set, and the chip provides an unlock() operation, mtd_add_device will unlock the whole MTD device if it's writeable. This means that non-writeable partitions will stay locked. Set MTD_STUPID_LOCK in fixup_use_atmel_lock() so that these chips will work as expected. Signed-off-by: Håvard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-17[MTD] Use SEEK_{SET,CUR,END} instead of hardcoded values in mtdchar lseek()Josef 'Jeff' Sipek
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-16MTD: Fix bug in fixup_convert_atmel_priHåvard Skinnemoen
The memset() in fixup_convert_atmel_pri is supposed to zero out everything except the first 5 bytes in *extp, but it ends up zeroing out something way outside the struct instead. Fix this potentially dangerous code by casting the pointer to char * before doing arithmetic. Signed-off-by: Håvard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-05[PATCH] [MTD] DEVICES: Fill more device IDs in the structure of m25p80Aubrey Lee
The flash_info structure has a bunch of missing fields which causes problems when actually tryin to use some ST parts as it gets detected incorrectly. Signed-off-by: Aubrey L1 <aubreylee@gmail.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2006-08-30Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2006-08-27[PATCH] MTD NAND: Fix ams-delta after core conversionJonathan McDowell
The recent hwctrl core conversion for MTD NAND devices broke the Amstrad Delta driver. This fixes it up and uses the existing control line defines rather than unclear magic numbers. Signed-off-by: Jonathan McDowell <noodles@earth.li> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27[PATCH] mtd corruption fixRichard Purdie
Read the return value before we release the nand device otherwise the value can become corrupted by another user of chip->ops, ultimately resulting in filesystem corruption. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Josh Boyer <jwboyer@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-16MTD: Add lock/unlock operations for Atmel AT49BV6416Haavard Skinnemoen
The AT49BV6416 is locked by default, so we really need to provide at least the unlock() operation for write and erase to work. This patch implements both ->lock() and ->unlock() and provides a fixup to install them when an AT49BV6416 chip is detected. These functions are probably valid on more Atmel chips, but I believe it's mostly obsolete ones. The AT49BV6416 is in fact obsolete, but it's used on all current AT32STK1000 development boards. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2006-08-16MTD: Convert Atmel PRI information to AMD formatHaavard Skinnemoen
Atmel flash chips don't have PRI information in the same format as AMD flash chips. This patch installs a fixup for all Atmel chips that converts the relevant PRI fields into AMD format. Only the fields that are actually used by the command set is actually converted. The rest are initialized to zero (which should be safe) Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2006-08-15[PATCH] [MTD] Maps: Add dependency on alternate probe methods to physmapTakashi YOSHII
map/physmap.c tries to probe "cfi_probe", "jedec_probe" and "map_rom", but map/Kconfig says it depends on MTD_CFI only. This patch adds MTD_JEDECPROBE and MTD_ROM to the dependency condition. Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2006-08-14[PATCH] MTD: Add Macronix MX29F040 to JEDECTakashi YOSHI
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2006-07-15[MTD] Fixes of performance and stability issues in CFI driver.Alexey Korolev
Fix of performance and stability issues on Intel NOR chips. It fixes: 1. Very low write performance on Sibley (perf tests demonstrated write performance less than 100Kb/sec when it should be over 400Kb/sec). 2. Low erase performance. (perf tests on Sibleuy demonstrated erase performance 246Kb/sec when it should be over 300Kb/sec). 3. Error on JFFS2 tests with CPU loading application when MTD returns "block erase error: (status timeout)" To fix the issue it does the following: 1. Removes the timeout tuning from inval_cache_and_wait_for_operation. 2. Waiting conditions in inval_cache_and_wait_for_operation now is based on timer resolution If timeout is lower than timer resolution then we do in cycle "Checking the status" udelay(1); cond_resched(); If timeout is greater than timer resolution (probably erase operation) We do the following sleep for half of operation timeout and do in cycle the following "Checking the status" sleep for timer resolution Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Alexey Korolev <akorolev@infradead.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-07-15block2mtd.c: Make kernel boot command line arguments work (try 4)Ville Herva
Trying to pass kernel command line arguments to block2mtd at boot-time does not work currently. block2mtd_setup() is called so early that kmalloc() fails nevermind being able to do open_bdev_excl() (which requires rootfs to be mounted. This patch only saves the option string at the early boot stage, and parses them later when block2mtd_init() is called. If open_bdev_excl() fails, open_by_devnum(name_to_dev_t()) is tried instead, which makes it possible to initialize the driver before rootfs has been mounted. Also gets rid of the superfluous parse_name() that only checks if name is longer than 80 chars and copies it to a string that is not kfreed. With this patch, I can boot statically compiled block2mtd, and mount jffs2 as rootfs (without modules or initrd), with lilo config like this: root=/dev/mtdblock0 append="rootfstype=jffs2 block2mtd.block2mtd=/dev/hdc2,65536" (Note that rootfstype=jffs2 is required, since the kernel only tries filesystems without "nodev" attribute by default, and jffs is "nodev"). Compared to first version of this patch, this one does not copy the parameters to the global buffer if init has already been called, and the global array is marked as __initdata. Compared to the second version of this patch, module build is fixed. Compared to the third version of this patch, statically compiled block2mtd driver with no boot-time parameter no longer gives spurious error 'cannot open device ""' Signed-off-by: Ville Herva <vherva@vianova.fi> Acked-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-07-15[MTD NAND] Fix lookup error in nand_get_flash_type()David Woodhouse
Spotted by liyu <liyu@ccoss.com.cn> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-07-15remove #error on !PCI from pmc551.cRolf Eike Beer
PMC551 depends on PCI in Kconfig so there is no need to #error in code if PCI is not set. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-07-15MTD: [NAND] Fix the sharpsl driver after breakage from a core conversionRichard Purdie
The CNE bits are inverted on the device and writeb function is missing a NOT operation. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-07-11[MTD] NAND: OOB buffer offset fixupsVitaly Wool
In the case of data-pad-ecc-pad-data... layout the oob start position has to be sizeof(data) in nand_write_oob_syndrom(). In nand_fill_oob() we need to copy to buf + buffer offset instead of buf + write offset. From: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-07-05[PATCH] [MTD] NAND: fix dead URL in KconfigArtem B. Bityutskiy
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
2006-07-03Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: [JFFS2][XATTR] Fix memory leak in POSIX-ACL support fs/jffs2/: make 2 functions static [MTD] NAND: Fix broken sharpsl driver [JFFS2][XATTR] Fix xd->refcnt race condition MTD: kernel-doc fixes + additions MTD: fix all kernel-doc warnings [MTD] DOC: Fixup read functions and do a little cleanup
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-29[MTD] NAND: Fix broken sharpsl driverThomas Gleixner
Remove the not longer supported NO_VIRTBLOCKS flag and remove an unused variable while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>