aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/Makefile
AgeCommit message (Collapse)Author
2007-10-10[NIU]: Add Sun Neptune ethernet driver.David S. Miller
With cleanup suggestions and bugs spotted by Stephen Hemminger, Ingo Oeser, Matheos Worku, and Oliver Hartkopp. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10dgrs: remove from build, config, and maintainer listNathanael Nerode
Stop building and configuring driver for Digi RightSwitch, which was never actually sold to anyone, and remove it from MAINTAINERS. In response to an investigation into the firmware of the "Digi Rightswitch" driver, Andres Salomon discovered: > > Dear Andres: > > After further research, we found that this product was killed in place > and never reached the market. We would like to request that this not be > included. Since the product never reached market, clearly nobody is using this orphaned driver. Signed-off-by: Nathanael Nerode <neroden@gcc.gnu.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10NET_SB1250_MAC: Rename to SB1250_MACMaciej W. Rozycki
Rename NET_SB1250_MAC to SB1250_MAC to follow the convention. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10Device tree aware EMAC driverDavid Gibson
Based on BenH's earlier work, this is a new version of the EMAC driver for the built-in ethernet found on PowerPC 4xx embedded CPUs. The same ASIC is also found in the Axon bridge chip. This new version is designed to work in the arch/powerpc tree, using the device tree to probe the device, rather than the old and ugly arch/ppc OCP layer. This driver is designed to sit alongside the old driver (that lies in drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The old driver is left in place to support arch/ppc until arch/ppc itself reaches its final demise (not too long now, with luck). This driver still has a number of things that could do with cleaning up, but I think they can be fixed up after merging. Specifically: - Should be adjusted to properly use the dma mapping API. Axon needs this. - Probe logic needs reworking, in conjuction with the general probing code for of_platform devices. The dependencies here between EMAC, MAL, ZMII etc. make this complicated. At present, it usually works, because we initialize and register the sub-drivers before the EMAC driver itself, and (being in driver code) runs after the devices themselves have been instantiated from the device tree. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[NET]: Add Tehuti network driver.Andy Gospodarek
[ Ported to napi_struct changes... -DaveM ] Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[IPG]: add IP1000A driver to kernel treeFrancois Romieu
Signed-off-by: Jesse Huang <jesse@icplus.com.tw> Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10ixgbe: driver for Intel(R) 82598 PCI-Express 10GbE adapters (v4)Auke Kok
This patch adds support for the Intel 82598 PCI-Express 10GbE chipset. Devices will be available on the market soon. This version of the driver is largely the same as the last release: * Driver uses a single RX and single TX queue, each using 1 MSI-X irq vector. * Driver runs in NAPI mode only * Driver is largely multiqueue-ready (TM) Changes since 20070803: * removed wrappers for hardware functions * incorporated e1000e-style HW api reorganization code * sparse/checkpatch cleanups, namespace cleanups * driver prints out extra debugging information at load time identifying adapter board number, mac, phy types * removed ixgbe_api.c, ixgbe_api.h, ixgbe_osdep.h * driver update to 1.1.18 * removed ixgbe.txt which contained no useful info anymore [ Integrated napi_struct changes from Auke as well... -DaveM ] Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)Auke Kok
This driver implements support for the ICH9 on-board LAN ethernet device. The device is similar to ICH8. The driver encompasses code to support 82571/2/3, es2lan and ICH8 devices as well, but those device IDs are disabled and will be "lifted" from the e1000 driver over one at a time once this driver receives some more live time. Changes to the last snapshot posted are exclusively in the internal hardware API organization. Many thanks to Jeff Garzik for jumping in and getting this organized with a keen eye on the future layout. [ Integrated napi_struct patch from Auke as well... -DaveM ] Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Virtual ethernet device driver.Pavel Emelyanov
Veth stands for Virtual ETHernet. It is a simple tunnel driver that works at the link layer and looks like a pair of ethernet devices interconnected with each other. Mainly it allows to communicate between network namespaces but it can be used as is as well. The newlink callback is organized that way to make it easy to create the peer device in the separate namespace when we have them in kernel. This implementation uses another interface - the RTM_NRELINK message introduced by Patric. Bug fixes from Daniel Lezcano. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-15sk98lin: resurrect driverStephen Hemminger
This reverts commit e1abecc48938fbe1966ea6e78267fc673fa59295. The driver works on some hardware that skge doesn't handle yet. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-29Make lguest compile with CONFIG_BLOCK=n and CONFIG_NET=nRusty Russell
Gabriel C reports lguest doesn't compile with CONFIG_BLOCK=n. Fix this by introducing a config var for the block device, which depends on LGUEST && BLOCK. Do the same for the net driver, rather then depending gratuitously on CONFIG_NET. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Gabriel C <nix.or.die@googlemail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-24ucc_geth: add ethtool supportLi Yang
The patch enables statistics in ucc_geth and adds ethtool support to ucc_geth driver. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-19lguest: the net driverRusty Russell
Lguest net driver A simple net driver for lguest. [akpm@linux-foundation.org: include fix] Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18Blackfin ethernet driver: on chip ethernet MAC controller driverBryan Wu
This patch implements the driver necessary use the Analog Devices Blackfin processor's on-chip ethernet MAC controller. [try#2] - add timeout control - kill dma_config_reg bitfields - some trivial cleanup [try#3] - add endianess check - add DRV_NAME, DRV_VERSION... driver information string - add some comments for silicon anomaly and dma API confusion - some code trivial cleanup [try#4] - add Blackfin latest GPIO pin mux opertion with Michael Hennerich's help and Dan's review - rewrite the DMA descriptor list operation in a more readable way by Joe's review [try#5] - cleanup some coding style by Joe's review. [try#6] - 1.1 version fix a bug when set up multicast list pointed by Mr. yoshfuji - rearrange the desc_list_free function. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: Michael Buesch <mb@bu3sch.de> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dan Williams <dcbw@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-18xen: add virtual network device driverJeremy Fitzhardinge
The network device frontend driver allows the kernel to access network devices exported exported by a virtual machine containing a physical network device driver. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: Ian Pratt <ian.pratt@xensource.com> Cc: Christian Limpach <Christian.Limpach@cl.cam.ac.uk> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Keir Fraser <Keir.Fraser@cl.cam.ac.uk> Cc: netdev@vger.kernel.org
2007-07-16Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: splice: direct splicing updates ppos twice more ACSI removal umem: Fix match of pci_ids in umem driver umem: Remove references to dead CONFIG_MM_MAP_MEMORY variable remove the documentation for the legacy CDROM drivers
2007-07-16more ACSI removalAdrian Bunk
This patch removes some code that became dead code after the ATARI_ACSI removal. It also indirectly fixes the following bug introduced by commit c2bcf3b8978c291e1b7f6499475c8403a259d4d6: config ATARI_SLM tristate "Atari SLM laser printer support" - depends on ATARI && ATARI_ACSI!=n + depends on ATARI Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16[SPARC64]: Add Sun LDOM virtual network driver.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NET]: Add macvlan driverPatrick McHardy
Add macvlan driver, which allows to create virtual ethernet devices based on MAC address. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[L2TP]: PPP over L2TP driver coreJames Chapman
This driver handles only L2TP data frames; control frames are handled by a userspace application. It implements L2TP using the PPPoX socket family. There is a PPPoX socket for each L2TP session in an L2TP tunnel. PPP data within each session is passed through the kernel's PPP subsystem via this driver. Kernel parameters of each socket can be read or modified using ioctl() or [gs]etsockopt() calls. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10ps3: gigabit ethernet driver for PS3, take3Masakazu Mokuno
Hi, This is the third submission of the network driver for PS3. The differences from the previous one are: - renamed source file names so that their prefix can match with the module name - added cbe-oss-dev@ozlabs.org line for MAINTAINER file - changed some in copyright comments If there are no more comments, please apply for 2.6.23. Thank you -- Subject: PS3: Ethernet driver From: Masakazu Mokuno <mokuno@sm.sony.co.jp> Add Gigabit Ethernet support for the PS3 game console. The module will be called ps3_gelic. CC: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10Remove sk98lin ethernet driver.Jeff Garzik
Unmaintained, superceded by skge. Prodded to deletion by Adrian Bunk. Acked by Stephen Hemminger. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10AX88796 network driverBen Dooks
Support for the Asix AX88796 network controller, an NE2000 compatible 10/100 ethernet device with internal PHY. The driver supports PHY settings via either ioctl() or the ethtool driver ops. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08Ethernet driver for EISA only SNI RM200/RM400 machinesThomas Bogendoerfer
Changes to last version: - spelling fix - cleaned up probe code Thomas. Ethernet driver for EISA only SNI RM200/RM400 machines Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters IB: Put rlimit accounting struct in struct ib_umem IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules
2007-05-09Move USB network drivers to drivers/net/usb.Jeff Garzik
It is preferable to group drivers by usage (net, scsi, ATA, ...) than by bus. When reviewing drivers, the [PCI|USB|PCMCIA|...] maintainer is probably less qualified on networking issues than a networking maintainer. Also, from a practical standpoint, chips often appear on multiple buses, which is why we do not put drivers into drivers/pci/net. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-08IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adaptersRoland Dreier
Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-28ucc_geth: migrate ucc_geth to phylibKim Phillips
migrate ucc_geth to use the common phylib code. There are several side effects from doing this: o deprecate 'interface' property specification present in some old device tree source files in favour of a split 'max-speed' and 'interface-type' description to appropriately match definitions in include/linux/phy.h. Note that 'interface' property is still honoured if max-speed or interface-type are not present (backward compatible). o compile-time CONFIG_UGETH_HAS_GIGA is eliminated in favour of probe time speed derivation logic. o adjust_link streamlined to only operate on maccfg2 and upsmr.r10m, instead of reapplying static initial values related to the interface-type. o Addition of UEC MDIO of_platform driver requires platform code add 'mdio' type to id list prior to calling of_platform_bus_probe (separate patch). o ucc_struct_init introduced to reduce ucc_geth_startup complexity. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-25[WIRELESS]: Refactor wireless Kconfig.Johannes Berg
This patch refactors the wireless Kconfig all over and already introduces net/wireless/Kconfig with just the WEXT bit for now, the cfg80211 patch will add to that as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-08Add Attansic L1 ethernet driver.Jay Cliburn
This driver is a modified version of the Attansic reference driver for the L1 ethernet adapter. Attansic has granted permission for its inclusion in the mainline kernel. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05PA Semi PWRficient Ethernet driverOlof Johansson
Driver for the PA Semi PWRficient on-chip Ethernet (1/10G) Basic enablement, will be complemented with performance enhancements over time. PHY support will be added as well. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05remove the broken OAKNET driverAdrian Bunk
The OAKNET driver: - has been marked as BROKEN for more than two years and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Add support for the latest 1G/10G Chelsio adapter, T3.Divy Le Ray
This driver is required by the Chelsio T3 RDMA driver posted by Steve Wise. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05remove the broken SKMC driverAdrian Bunk
The SKMC driver has: - already been marked as BROKEN in 2.6.0 three years ago and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05driver for Silan SC92031 netdevCesar Eduardo Barros
This is a driver for the Silan SC92031/Rsltek 8139D NIC chip. This chip is found on at least one counterfeit Encore ENL832-TX-RENT NIC [1], which came with a mini-CD with the 2.4 driver. A slightly older version of the driver was found at [2]. The main difference between them is that the newer one has a small bugfix in the RX path, a lot of gratuitous renaming of functions, all the printable strings changed to show as a "Rsltek 8139D" [sic], and a PCI ID of 8139 instead of 2031. The driver on this patch is a rewrite of the vendor drivers (based mostly on the older one). Changes from the previous patch sent to netdev: - Use MMIO instead of PIO - Changed TX bounce buffers allocation - Use skb_copy_and_csum_dev - Several small bug fixes - Tested for more than just a few minutes each time [1] See http://www.encore-usa.com/faq.php under ENL832-TX-RENT for more information [2] Look for SL_LINUX.ZIP (which is really a .tar.gz) at http://broadbandforum.in/dataone_Intex_LAN_cardlinux-t4207-s15.html [3] To compile on 2.6.17, simply add back the last argument to the interrupt handler in two places, and copy the boolean declarations from 2.6.19 [akpm@osdl.org: build fixes] Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] Atmel MACB ethernet driverHaavard Skinnemoen
Driver for the Atmel MACB on-chip ethernet module. Tested on AVR32/AT32AP7000/ATSTK1000. I've heard rumours that it works with AT91SAM9260 as well, and it may be possible to share some code with the at91_ether driver for AT91RM9200. Hardware documentation can be found in the AT32AP7000 data sheet, which can be downloaded from http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Changes since previous version: * Probe for PHY ID instead of depending on it being provided through platform_data. * Grab initial ethernet address from the MACB registers instead of depending on platform_data. * Set MII/RMII mode correctly. These changes are mostly about making the driver more compatible with the at91 infrastructure. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] Add tsi108/9 On Chip Ethernet device driver supportZang Roy-r61911
Add tsi108/9 on chip Ethernet controller driver support. The driver code collects the feedback of previous posting form the mailing list and gives the update. MPC7448HPC2 platform in arch/powerpc uses tsi108 bridge. The following is a brief description of the Ethernet controller: The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent Gigabit Ethernet ports,E0 and E1. It uses a single Management interface to manage the two physical connection devices (PHYs). Each Ethernet port has its own statistics monitor that tracks and reports key interface statistics. Each port supports a 256-entry hash table for address filtering. In addition, each port is bridged to the Switch Fabric through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO. Each Ethernet port also has a pair of internal Ethernet DMA channels to support the transmit and receive data flows. The Ethernet DMA channels use descriptors set up in memory, the memory map of the device, and access via the Switch Fabric. The Ethernet Controller’s DMA arbiter handles arbitration for the Switch Fabric. The Controller also has a register bus interface for register accesses and status monitor control. The PMD (Physical Media Device) interface operates in MII, GMII, or TBI modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs. The GMII and TBI modes are used to connect with Gigabit PMDs. Internal data flows to and from the Ethernet Controller through the Switch Fabric. Each Ethernet port uses its transmit and receive DMA channels to manage data flows through buffer descriptors that are predefined by the system (the descriptors can exist anywhere in the system memory map). These descriptors are data structures that point to buffers filled with data ready to transmit over Ethernet, or they point to empty buffers ready to receive data from Ethernet. Signed-off-by: Alexandre Bounine <Alexandre.Bounine@tundra.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02Add NetXen 1G/10G ethernet driver.Amit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] 8390 fixes - the final chunk (h8300)Al Viro
The rest of 8390 conversions; ifdef cascade in 8390.h is gone now. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] 8390 fixes - m68k oddballsAl Viro
more 8390 conversions - mac8390, zorro8390 and hydra got the same treatment as arm etherh; one more case in 8390.h ifdef cascade is gone. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] beginning of 8390 fixes - generic and arm/etherhAl Viro
etherh and a handful of other odd drivers use different macros when building 8390.c. Since we generate a single 8390.o and then link with it, in any config with both oddball and normal 8390-based driver we will end up with breakage in at least one of them. Solution: take most of 8390.c into lib8390.c and have 8390.c, etherh.c and the rest of oddballs #include it. Helper macros are taken from 8390.h to whoever includes lib8390.c. That way odd drivers get separate instances of compiled 8390 stuff and stop stepping on each other's toes. 8390.h gets cleaned up - we don't have the cascade of ifdefs in there and are left with the stuff that can be used by any 8390-based driver. Current problems are exactly because of that cascade - we attempt to choose the set of helpers by looking at config and that, of course, doesn't work well when we have several sets needed by various drivers in our config. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-22[NET] GT96100: Delete bitrotting ethernet driverRalf Baechle
Code for the EV96100 evaluation board hasn't compiled since at least November 15, 2003, so it is being deleted as of 2.6.18 due to lack of a user base. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13[PATCH] ehea: IBM eHEA Ethernet Device DriverJan-Bernd Themann
Hi Jeff, I fixed the __iomem issue and tested the driver with sparse. Looks good so far. Thanks for your effort. Jan-Bernd Themann Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> drivers/net/Kconfig | 9 drivers/net/Makefile | 1 drivers/net/ehea/Makefile | 6 drivers/net/ehea/ehea.h | 447 ++++++ drivers/net/ehea/ehea_ethtool.c | 294 ++++ drivers/net/ehea/ehea_hcall.h | 51 drivers/net/ehea/ehea_hw.h | 287 ++++ drivers/net/ehea/ehea_main.c | 2654 ++++++++++++++++++++++++++++++++++++++++ drivers/net/ehea/ehea_phyp.c | 705 ++++++++++ drivers/net/ehea/ehea_phyp.h | 455 ++++++ drivers/net/ehea/ehea_qmr.c | 582 ++++++++ drivers/net/ehea/ehea_qmr.h | 358 +++++ 12 files changed, 5849 insertions(+) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19Merge branch 'upstream-fixes' into upstreamJeff Garzik
2006-08-19[PATCH] Freescale QE UCC gigabit ethernet driverLi Yang
QE(QUICC Engine) is a new generation communication coprocessor, which can be found on some of the latest Freescale PowerQUICC CPUs(e.g. MPC8360). The UCC(Unified Communications Controller) module of QE can work as gigabit Ethernet device. This patch provides driver for the device. Signed-off-by: Shlomi Gridish <gridish@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-29[PATCH] qla3xxx NIC driverRon Mercer
This is a complementary network driver for our ISP4XXX parts. There is a concurrent effort underway to get the iSCSI driver (qla4xxx) integrated upstream as well. I have been through several iterations with the linux-netdev list and have had much response from Stephen Hemminger. - Built and tested using kernel 2.6.17-rc4. - The chip supports two ethernet and two iSCSI functions. - The functions ql_sem_lock, ql_sem_spinlock, ql_sem_unlock, and ql_wait_for_drvr_lock are used to protect resources that are shared across the network and iSCSI functions. This protection is mostly during chip initialization and resets, but also include link management. - The PHY/MII are not exported through ethtool due to the fact that the iSCSI function will control the common link at least 50% of the time. This driver has been through several iterations on the netdev list and we feel this driver is ready for inclusion in the upstream kernel. It has been built and tested on x86 and PPC64 platforms. Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-19[PATCH] Cleanup SLHC configurationRalf Baechle
Convert selection of serial line header compression to use CONFIG_SLHC rather than makefile ifeq uglyness. This makes it easier to select the SLHC module from other code. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22[PATCH] network driver for Hilscher netxSascha Hauer
This is a patch for the Hilscher netx builtin ethernet ports. The netx board support was merged into 2.6.17-git2. The netx is a arm926 based SoC. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> -- drivers/net/Kconfig | 11 drivers/net/Makefile | 1 drivers/net/netx-eth.c | 516 ++++++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-netx/eth.h | 27 ++ 4 files changed, 555 insertions(+) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24[PATCH] Add Myri-10G Ethernet driverBrice Goglin
Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew J. Gallatin <gallatin@myri.com> drivers/net/Kconfig | 17 drivers/net/Makefile | 1 drivers/net/myri10ge/Makefile | 5 drivers/net/myri10ge/myri10ge.c | 2851 +++++++++++++++ drivers/net/myri10ge/myri10ge_mcp.h | 205 + drivers/net/myri10ge/myri10ge_mcp_gen_header.h | 58 include/linux/pci_ids.h | 1 7 files changed, 3138 insertions(+) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-20[PATCH] RE: [PATCH 1/1] net driver: Add support for SMSC LAN911x line of ↵Dustin McIntire
ethernet chips > > The patch was badly wordwrapped. Please fix and resend. > OK, I've fixed the wrapping and removed the CONFIG_ARM restriction. I've also did my best to modify the C style to conform to the comments. I noticed that the patch is getting ignored by majordomo due to its size >100K. Should it be broken up somehow to allow posting to the lists? Signed-off-by: Dustin McIntire <dustin@sensoria.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>