aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/bnx2.c
AgeCommit message (Collapse)Author
2008-02-23[BNX2]: Update version to 1.7.4.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-23[BNX2]: Disable parallel detect on an HP blade.Michael Chan
Because of some board issues, we need to disable parallel detect on an HP blade. Without this patch, the link state can become stuck when it goes into parallel detect mode. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-23[BNX2]: More 5706S link down workaround.Michael Chan
The previous patches to workaround the 5706S on an HP blade were not sufficient. The link state still does not change properly in some cases. This patch adds polling to make it completely reliable. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-09bnx2: section fixAndrew Morton
gcc-3.4.4 on powerpc: drivers/net/bnx2.c:67: error: version causes a section type conflict Cc: Jeff Garzik <jeff@garzik.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[BNX2]: Fix ASYM PAUSE advertisement for remote PHY.Michael Chan
We were checking for the ASYM_PAUSE bit for 1000Base-X twice instead checking for both the 1000Base-X bit and the 10/100/1000Base-T bit. The purpose of the logic is to tell the firmware that ASYM_PAUSE is set on either the Serdes or Copper interface. Problem was discovered by Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[BNX2]: Update version to 1.7.3.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[BNX2]: Fine-tune flow control on 5709.Michael Chan
Make use of the programmable high/low water marks in 5709 for 802.3 flow control. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[BNX2]: Remove CTX_WR macro.Michael Chan
The CTX_WR macro is unnecessary and obfuscates the code. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[BNX2]: Remove REG_WR_IND/REG_RD_IND macros.Michael Chan
The REG_WR_IND/REG_RD_IND macros are unnecessary and obfuscate the code. Many callers to these macros read and write shared memory from the bp->shmem_base, so we add 2 similar functions that automatically add the shared memory base. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[BNX2]: Refine tx coalescing setup.Michael Chan
Make the tx coalescing setup code independent of the MSIX vector. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[BNX2]: Fix 5706 serdes link down bug.Michael Chan
1. Correct the MII expansion serdes control register definition. 2. Check an additional RUDI_INVALID bit when determining 5706S link. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28bnx2 annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28[BNX2]: Fix driver phy_flags name space.Michael Chan
Prefix "bp->phy_flags" names with BNX2_PHY_FLAG_* for consistency. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Fix driver software flag namespace.David S. Miller
Prefix "bnx2->flags" names with BNX2_* for consistency. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2] Update version to 1.7.2.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Add link-down workaround on 5706 serdes.Michael Chan
In some blade systems using the 5706 serdes, the hardware sometimes does not properly generate link down interrupts. We add a workaround in the driver's timer to force a link-down when some PHY registers report loss of SYNC. The parallel detect logic is cleaned up slightly to better integrate the workaround. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Fix minor bug in bnx2_has_work().Michael Chan
It is more correct to get the status block from the bnx2_napi struct instead of the bnx2 struct. It happens that they are the same in this case because we are using the first MSIX vector. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Disable jumbo rx paging on 5709 Ax.Michael Chan
The chip has problem running in this mode and needs to be disabled. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28NULL noise in drivers/netAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Fix compiler warning.Michael Chan
Change bnx2_init_napi() to void. Warning was noted by DaveM. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Update version to 1.7.1.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Enable new tx ring.Michael Chan
Enable new tx ring and add new MSIX handler and NAPI poll function for the new tx ring. Enable MSIX when the hardware supports it. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Add support for a new tx ring.Michael Chan
To separate TX IRQs into a different MSIX vector, we need to support a new tx ring. The original tx ring will still be used when not using MSIX. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Support multiple MSIX IRQs.Michael Chan
Change bnx2_napi struct into an array and add code to manage multiple IRQs. MSIX hardware structures and new registers are also added. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Move rx indexes into bnx2_napi struct.Michael Chan
Rx related fields used in NAPI polling are moved from the main bnx2 struct to the bnx2_napi struct. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Move tx indexes into bnx2_napi struct.Michael Chan
Tx related fields used in NAPI polling are moved from the main bnx2 struct to the bnx2_napi struct. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Introduce new bnx2_napi structure.Michael Chan
Introduce a bnx2_napi structure that will hold a napi_struct and other fields to handle NAPI polling for the napi_struct. Various tx and rx indexes and status block pointers will be moved from the main bnx2 structure to this bnx2_napi structure. Most NAPI path functions are modified to be passed this bnx2_napi struct pointer. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Restructure IRQ datastructures.Michael Chan
Add a table to keep track of multiple IRQs and restructure the IRQ request and free functions so that they can be easily expanded to handle multiple IRQs. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Add function to fetch hardware tx index.Michael Chan
This makes the code cleaner and easier to support different tx rings. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Update version to 1.6.9.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Enable S/G for jumbo RX.Michael Chan
If the MTU requires more than 1 page for the SKB, enable the page ring and calculate the size of the page ring. This will guarantee order-0 allocation regardless of the MTU size. Fixup loopback test packet size so that we don't deal with the pages during loopback test. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Add fast path code to handle RX pages.Michael Chan
Add function to reuse a page in case of allocation or other errors. Add code to construct the completed SKB with the additional data in the pages. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Add init. code to handle RX pages.Michael Chan
Add new fields to keep track of the pages and the page rings. Add functions to allocate and free pages. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Update firmware to support S/G RX buffers.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Restructure RX ring init. code.Michael Chan
Factor out the common functions that will be used to initialize the normal RX rings and the page rings. Change the copybreak constant RX_COPY_THRESH to 128. This same constant will be used for the max. size of the linear SKB when pages are used. Copybreak will be turned off when pages are used. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Restructure RX fast path handling.Michael Chan
Add a new function to handle new SKB allocation and to prepare the completed SKB. This makes it easier to add support for non-linear SKB. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Add ring constants.Michael Chan
Define the various ring constants to make the code cleaner. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[BNX2]: Update version to 1.6.9.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[BNX2]: Fix RX packet rot.Michael Chan
Packets can be left in the RX ring if the NAPI budget is reached. This is caused by storing the latest rx index at the beginning of bnx2_rx_int(). We may not process all the work up to this index if the budget is reached and so some packets in the RX ring may rot when we later check for more work using this stored rx index. The fix is to not store this latest hw index and only store the processed rx index. We use a new function bnx2_get_hw_rx_cons() to fetch the latest hw rx index. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[BNX2]: Add PHY_DIS_EARLY_DAC workaround.Michael Chan
5709 Ax and Bx chips all need this workaround. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-19remove asm/bitops.h includesJiri Slaby
remove asm/bitops.h includes including asm/bitops directly may cause compile errors. don't include it and include linux/bitops instead. next patch will deny including asm header directly. Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (51 commits) [IPV6]: Fix again the fl6_sock_lookup() fixed locking [NETFILTER]: nf_conntrack_tcp: fix connection reopening fix [IPV6]: Fix race in ipv6_flowlabel_opt() when inserting two labels [IPV6]: Lost locking in fl6_sock_lookup [IPV6]: Lost locking when inserting a flowlabel in ipv6_fl_list [NETFILTER]: xt_sctp: fix mistake to pass a pointer where array is required [NET]: Fix OOPS due to missing check in dev_parse_header(). [TCP]: Remove lost_retrans zero seqno special cases [NET]: fix carrier-on bug? [NET]: Fix uninitialised variable in ip_frag_reasm() [IPSEC]: Rename mode to outer_mode and add inner_mode [IPSEC]: Disallow combinations of RO and AH/ESP/IPCOMP [IPSEC]: Use the top IPv4 route's peer instead of the bottom [IPSEC]: Store afinfo pointer in xfrm_mode [IPSEC]: Add missing BEET checks [IPSEC]: Move type and mode map into xfrm_state.c [IPSEC]: Fix length check in xfrm_parse_spi [IPSEC]: Move ip_summed zapping out of xfrm6_rcv_spi [IPSEC]: Get nexthdr from caller in xfrm6_rcv_spi [IPSEC]: Move tunnel parsing for IPv4 out of xfrm4_input ...
2007-10-18Add missing newlines to some uses of dev_<level> messagesJoe Perches
Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17[BNX2]: Update version to 1.6.8.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17[BNX2]: Fix Serdes WoL bug.Michael Chan
The bug is in the code in bnx2_set_power_state() that assumes copper devices when setting up WoL. This is no longer true after adding WoL support for Serdes devices. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-12[BNX2]: Refine napi poll loop.Michael Chan
Need to read and store sblk->status_idx before checking for more work. The status idx is later written back to the hardware when enabling interrupts to acknowledge how much work has been processed. If the order is reversed, we can end up acknowledging work we haven't processed. When completing bnx2_poll(), we should always break out of the while loop and return work_done instead of returning 0. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[NET]: Fix NAPI completion handling in some drivers.David S. Miller
In order for the list handling in net_rx_action() to be correct, drivers must follow certain rules as stated by this comment in net_rx_action(): /* Drivers must not modify the NAPI state if they * consume the entire weight. In such cases this code * still "owns" the NAPI instance and therefore can * move the instance around on the list at-will. */ A few drivers do not do this because they mix the budget checks with reading hardware state, resulting in crashes like the one reported by takano@axe-inc.co.jp. BNX2 and TG3 are taken care of here, SKY2 fix is from Stephen Hemminger. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[BNX2]: Update version to 1.6.7.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[BNX2]: Fix default WoL setting.Michael Chan
Change the default WoL setting to match the NVRAM's setting. It always defaulted to WoL disabled before and caused a lot of confusion for users. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[BNX2]: Fix remote PHY media detection problems.Michael Chan
The remote PHY media type and link status can change between ->probe() and ->open(). For correct operation, we need to get the new status again during ->open(). The ethtool link test and loopback test are also fixed to work with remote PHY. PHY loopback is simply skipped when remote PHY is present. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>