aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/bnx2.h
AgeCommit message (Collapse)Author
2007-05-03[BNX2]: Add 40-bit DMA workaround for 5708.Michael Chan
The internal PCIE-to-PCIX bridge of the 5708 has the same 40-bit DMA limitation as some of the tg3 chips. Set dma_mask and persistent DMA mask to 40-bit to workaround. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-24[BNX2]: Fix occasional NETDEV WATCHDOG on 5709.Michael Chan
Tweak a register setting to prevent the tx mailbox from halting. Update version to 1.5.8. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-02[BNX2]: PHY workaround for 5709 A0.Michael Chan
5709 A0 copper devices will not link up with some link partners without this workaround. Update driver to 1.5.5. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Add new 5709 registers (part 2).Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Add new 5709 registers (part 1).Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Re-organize firmware structures.Michael Chan
Re-organize the firmware handling code and declarations a bit to make the code more compact. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Add 5708S parallel detection.Michael Chan
Add code to parallel detect 1Gbps and 2.5Gbps link speeds. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Improve SerDes handling.Michael Chan
1. Add support for 2.5Gbps forced speed setting. 2. Remove a long udelay() loop and change to msleep(). 3. Other misc. SerDes fixes. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-13drivers/net: Trim trailing whitespaceJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-17[BNX2]: Fix tx race condition.Michael Chan
Fix a subtle race condition between bnx2_start_xmit() and bnx2_tx_int() similar to the one in tg3 discovered by Herbert Xu: CPU0 CPU1 bnx2_start_xmit() if (tx_ring_full) { tx_lock bnx2_tx() if (!netif_queue_stopped) netif_stop_queue() if (!tx_ring_full) update_tx_ring netif_wake_queue() tx_unlock } Even though tx_ring is updated before the if statement in bnx2_tx_int() in program order, it can be re-ordered by the CPU as shown above. This scenario can cause the tx queue to be stopped forever if bnx2_tx_int() has just freed up the entire tx_ring. The possibility of this happening should be very rare though. The following changes are made, very much identical to the tg3 fix: 1. Add memory barrier to fix the above race condition. 2. Eliminate the private tx_lock altogether and rely solely on netif_tx_lock. This eliminates one spinlock in bnx2_start_xmit() when the ring is full. 3. Because of 2, use netif_tx_lock in bnx2_tx_int() before calling netif_wake_queue(). 4. Add memory barrier to bnx2_tx_avail(). 5. Add bp->tx_wake_thresh which is set to half the tx ring size. 6. Check for the full wake queue condition before getting netif_tx_lock in tg3_tx(). This reduces the number of unnecessary spinlocks when the tx ring is full in a steady-state condition. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29[BNX2]: Turn off link during shutdownMichael Chan
Minor change in shutdown logic to effect a link down. Update version to 1.4.43. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[BNX2]: Use CPU native page sizeMichael Chan
Use CPU native page size to determine various ring sizes. This allows order-0 memory allocations on all systems. Added check to limit the page size to 16K since that's the maximum rx ring size that will be used. This will prevent using unnecessarily large page sizes on some architectures with large page sizes. [Suggested by David Miller] Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[BNX2]: Add firmware decompressionMichael Chan
Add functions to decompress firmware before loading to the internal CPUs. Compressing the firmware reduces the driver size significantly. Added file name length sanity check in the gzip header to prevent going past the end of buffer [suggested by DaveM]. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[BNX2]: Add an rx drop counterMichael Chan
Add a counter for packets dropped by firmware. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-23[BNX2]: Separate tx producer and consumer fieldsMichael Chan
Put the tx producer and consumer fields in separate cache lines in the device structure, similar to the VJ net channel queue structure. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-23[BNX2]: Move .h files to bnx2.cMichael Chan
Move all #include <> from bnx2.h to bnx2.c. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-23[BNX2]: Combine small mem allocationsMichael Chan
Combine two small (56 byte and 320 byte) pci consistent memory allocations into one allocation. Jeff Garzik suggested to store the combined size in the bp structure for later use when freeing the memory. Use kzalloc() instead of kmalloc() + memset(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-23[BNX2]: Fix link change handlingMichael Chan
Fix some link-related problems by doing a coalesce_now after link change interrupt to flush out the transient link status. To facilitate this, the host coalesce cmd register value is cached in the device structure. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: include <linux/vmalloc.h>Michael Chan
Include <linux/vmalloc.h> so that it compiles properly on all archs. Update version to 1.4.38. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Support larger rx ring sizes (part 1)Michael Chan
Increase maximum receive ring size from 255 to 1020 by supporting up to 4 linked pages of receive descriptors. To accomodate the higher memory usage, each physical descriptor page is allocated separately and the software ring that keeps track of the SKBs and the DMA addresses is allocated using vmalloc. Some of the receive-related fields in the bp structure are re- organized a bit for better locality of reference. The max. was reduced to 1020 from 4080 after discussion with David Miller. This patch contains ring init code changes only. This next patch contains rx data path code changes. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-23[BNX2]: Update version and copyright yearMichael Chan
Update version to 1.4.31 and add 2006 copyright. Skip the last digit when reporting the firmware version. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-23[BNX2]: Fix nvram sizingMichael Chan
Add code to correctly determine nvram size. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-23[BNX2]: Fix UDP checksum verificationMichael Chan
Fix TCP/UDP checksum verification. Use status bits in the buffer descriptor instead of the checksum value to verify rx checksum. Using the checksum value will be incorrect if the UDP packet has zero in the UDP checksum field. Firmware update required for this fix. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-23[BNX2]: Misc. fixesMichael Chan
Some misc. fixes for WoL, 5708 B1, and a typo '=' instead of '=='. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-23[BNX2]: Improve handshake with firmwareMichael Chan
Improve handshake with bootcode with the following changes: 1. Increase timeout to 100msec and use msleep instead of udelay. 2. Add more error checking for timeouts and errors. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-23[BNX2]: Fix VLAN on ASFMichael Chan
Always set up the device to strip incoming VLAN tags when ASF is enabled. ASF firmware will not parse packets correctly if VLAN tags are not stripped. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-05[PATCH] bnx2: refine bnx2_pollMichael Chan
Refine bnx2_poll() logic to write back the most up-to-date status tag when all work has been processed. This eliminates some occasional extra interrupts when a older status tag is written even though all work has been processed. The idea is to read the status tag just before exiting bnx2_poll() and then check again for any new work. If no new work is pending, the status tag written back will not generate any extra interrupt. This logic is similar to the changes David Miller did to tg3_poll(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-05[PATCH] bnx2: update firmware handshake for 5708Michael Chan
Dynamically determine the shared memory location where eeprom parameters are stored instead of using a fixed location. Add speed reporting to management firmware. This allows management firmware to know the current speed without contending for MII registers. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-05[PATCH] bnx2: update nvram code for 5708Michael Chan
Update bnx2 nvram code with support for 5708. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-05[PATCH] bnx2: add 5708 supportMichael Chan
Add 5708 copper and serdes basic support, including 2.5 Gbps support on 5708 serdes. SPEED_2500 is also added to ethtool.h Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-09-08[BNX2]: Fix bug in irq handler and add prefetchMichael Chan
Fix bug in bnx2_interrupt() that caused an unnecessary register read. The BNX2_PCICFG_MISC_STATUS should only be read when the status tag has not changed. Add prefetch of the status block in bnx2_msi() similar to tg3_msi(). The status block is not touched in bnx2_msi() and prefetching it will speed up bnx2_poll() that will run on the same CPU that received the MSI. Update version. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[BNX2]: remove atomics in txMichael Chan
Remove atomic operations in the fast tx path. Expensive atomic operations were used to keep track of the number of available tx descriptors. The new code uses the difference between the consumer and producer index to determine the number of free tx descriptors. As suggested by Jeff Garzik, the name of the inline function is changed to all lower case. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[BNX2]: speedup serdes linkupMichael Chan
This speeds up link-up time on 5706 SerDes if the link partner does not autoneg, a rather common scenario in blade servers. Some blade servers use IPMI for keyboard input and it's important to minimize link disruptions. The speedup is achieved by shortening the timer to (HZ / 3) during the transient period right after initiating a SerDes autoneg. If autoneg does not complete, parallel detect can be done sooner. After the transient period is over, the timer goes back to its normal HZ interval. As suggested by Jeff Garzik, the timer initialization is moved to bnx2_init_board() from bnx2_open(). An eeprom bit is also added to allow default forced SerDes speed for even faster link-up time. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[BNX2]: Fix rtnl deadlock in bnx2_closeMichael Chan
This fixes an rtnl deadlock problem when flush_scheduled_work() is called from bnx2_close(). In rare cases, linkwatch_event() may be on the workqueue from a previous close of a different device and it will try to get the rtnl lock which is already held by dev_close(). The fix is to set a flag if we are in the reset task which is run from the workqueue. bnx2_close() will loop until the flag is cleared. As suggested by Jeff Garzik, the loop is changed to call msleep(1) instead of yield() in the original patch. flush_scheduled_work() is also moved to bnx2_remove_one() before the netdev is freed. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-26[BNX2]: New Broadcom gigabit network driver.Michael Chan
A new driver bnx2 for Broadcom bcm5706 is available. The patch also includes new 1000BASE-X advertisement bit definitions in mii.h Thanks to David Miller and Jeff Garzik for reviewing and their valuable feedback. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>