aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/cxgb3
AgeCommit message (Collapse)Author
2007-10-10[ETHTOOL] Provide default behaviors for a few ethtool sub-ioctlsJeff Garzik
For the operations get-tx-csum get-sg get-tso get-ufo the default ethtool_op_xxx behavior is fine for all drivers, so we permit op==NULL to imply the default behavior. This provides a more uniform behavior across all drivers, eliminating ethtool(8) "ioctl not supported" errors on older drivers that had not been updated for the latest sub-ioctls. The ethtool_op_xxx() functions are left exported, in case anyone wishes to call them directly from a driver-private implementation -- a not-uncommon case. Should an ethtool_op_xxx() helper remain unused for a while, except by net/core/ethtool.c, we can un-export it at a later date. [ Resolved conflicts with set/get value ethtool patch... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle
It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10cxgb3 - Update engine microcode versionDivy Le Ray
The new microcode engine version is set to 1.1.0 Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - Add T3C revDivy Le Ray
add driver recognition for T3C rev board. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - CQ context operations time out too soon.Divy Le Ray
Currently, the driver only tries up to 5 times (5us) to get the results of a CQ context operation. Testing has shown the chip can take as much as 50us to return the response on SG_CONTEXT_CMD operations. So we up the retry count to 100 to cover high loads. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - Set the CQ_ERR bit in CQ contexts.Divy Le Ray
The cxgb3 driver is incorrectly configuring the HW CQ context for CQ's that use overflow-avoidance. Namely the RDMA control CQ. This results in a bad DMA from the device to bus address 0. The solution is to set the CQ_ERR bit in the context for these types of CQs. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - remove false positive in xgmac workaroundDivy Le Ray
Qualify toggling of xgmac tx enable with not getting pause frames, we might not make forward progress because the peer is sending lots of pause frames. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - log and clear PEX errorsDivy Le Ray
Clear pciE PEX errors late at module load time. Log details when PEX errors occur. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - Firmware updateDivy Le Ray
Update firmware version. Allow the driver to be up and running with older FW image Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - Update internal memory managementDivy Le Ray
Set PM1 internal memory to round robin mode It balances access to this internal memory for multiport adapters. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - log adapter serial numberDivy Le Ray
Log HW serial number when cxgb3 module is loaded. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - Fatal error updateDivy Le Ray
Stop the MAC when a fatal error is detected. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - tighten checks on TID valuesDivy Le Ray
Enforce validity checks on connection ids Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - Expose HW memory page infoDivy Le Ray
A HW issue requires limiting the receive window size to 23 pages of internal memory. These pages can be configured to different sizes, thus the RDMA driver needs to know the page size to enforce the upper limit. Also assign explicit enum values. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - use immediate data for offload TxDivy Le Ray
Send small TX_DATA work requests as immediate data even when there are fragments. this avoids doing multiple DMAs for small fragmented packets. The driver already implements this optimization for small contiguous packets. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - SGE doorbell overflow warningDivy Le Ray
Log doorbell Fifo overflow Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - Update rx coalescing lengthDivy Le Ray
Reduce Rx coalescing length to 12288 Large bursts from the adapter to the host create back pressure on the chip. Reducing the burst size avoids the issue. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - MAC workaround updateDivy Le Ray
Update the MAC workaround to deal with switches that do not honor pause frames. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10drivers/net/cxgb3: removed several unneeded zero initilizationDenis Cheng
Cc: linux-bugs@chelsio.com Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[NET]: Make NAPI polling independent of struct net_device objects.Stephen Hemminger
Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-31- cxgb3 engine microcode loadDivy Le Ray
Load the engine microcode when an interface is brought up, instead of of doing it when the module is loaded. Loosen up tight binding between the driver and the engine microcode version. There is no need for microcode update with T3A boards. Fix the file naming. Do a better job at logging the loading activity. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-31cxgb3 - Fix dev->priv usageDivy Le Ray
cxgb3 used netdev_priv() and dev->priv for different purposes. In 2.6.23, netdev_priv() == dev->priv, cxgb3 needs a fix. This patch is a partial backport of Dave Miller's changes in the net-2.6.24 git branch. Without this fix, cxgb3 crashes on 2.6.23. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-31[NET]: ethtool_perm_addr only has one implementationMatthew Wilcox
All drivers implement ethtool get_perm_addr the same way -- by calling the generic function. So we can inline the generic function into the caller and avoid going through the drivers. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-26cxgb3 gfp_t annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (76 commits) IB: Update MAINTAINERS with Hal's new email address IB/mlx4: Implement query SRQ IB/mlx4: Implement query QP IB/cm: Send no match if a SIDR REQ does not match a listen IB/cm: Fix handling of duplicate SIDR REQs IB/cm: cm_msgs.h should include ib_cm.h IB/cm: Include HCA ACK delay in local ACK timeout IB/cm: Use spin_lock_irq() instead of spin_lock_irqsave() when possible IB/sa: Make sure SA queries use default P_Key IPoIB: Recycle loopback skbs instead of freeing and reallocating IB/mthca: Replace memset(<addr>, 0, PAGE_SIZE) with clear_page(<addr>) IPoIB/cm: Fix warning if IPV6 is not enabled IB/core: Take sizeof the correct pointer when calling kmalloc() IB/ehca: Improve latency by unlocking after triggering the hardware IB/ehca: Notify consumers of LID/PKEY/SM changes after nondisruptive events IB/ehca: Return QP pointer in poll_cq() IB/ehca: Change idr spinlocks into rwlocks IB/ehca: Refactor sync between completions and destroy_cq using atomic_t IB/ehca: Lock renaming, static initializers IB/ehca: Report RDMA atomic attributes in query_qp() ...
2007-07-10use is_power_of_2() in cxgb3/cxgb3_main.cvignesh babu
Replace (n & (n-1)) with is_power_of_2() Signed-off-by: vignesh babu <vignesh.babu@wipro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09RDMA/cxgb3: Streaming -> RDMA mode transition fixesSteve Wise
Due to a HW issue, our current scheme to transition the connection from streaming to rdma mode is broken on the passive side. The firmware and driver now support a new transition scheme for the passive side: - driver posts rdma_init_wr (now including the initial receive seqno) - driver posts last streaming message via TX_DATA message (MPA start response) - uP atomically sends the last streaming message and transitions the tcb to rdma mode. - driver waits for wr_ack indicating the last streaming message was ACKed. NOTE: This change also bumps the required firmware version to 4.3. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-08cxgb3 - TP SRAM updateDivy Le Ray
The chip executes microcode present in internal RAM, whose content is loaded from EEPROM on power cycle. This patch allows an update of the microcode through PIO without forcing a power cycle. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08cxgb3 - Firmware updateDivy Le Ray
Update FW to 4.1. Proceed to subsequent HW tuning to improve RDMA perfs.. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08cxgb3 - sge page managementDivy Le Ray
Streamline sge page management. Fix dma mappings when buffers are recycled. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-27cxgb3 - fix register to stop bc/mc trafficDivy Le Ray
Use the right register to stop broadcast/multicast traffic. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-20cxgb3 - MAC watchdog updateDivy Le Ray
Fix variables initialization and usage in the MAC watchdog. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-20cxgb3 - Stop mac RX when changing MTUDivy Le Ray
Rx traffic needs to be halted when the MTU is changed to avoid a potential chip hang. Reset/restore MAC filters around a MTU change. Also fix the pause frames high materwark setting. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-20cxgb3 - Fix direct XAUI supportDivy Le Ray
Check all lanes for link status on direct XAUI cards. Don't assume that direct XAUI always uses XGMAC 1. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-20cxgb3 - fix netpoll hanlderDivy Le Ray
Fix netpoll handler to work with line interrupt, msi and msi-x. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-20cxgb3 - fix skb->dev dereferenceDivy Le Ray
eth_type_trans() now sets skb->dev. References to skb->dev should happen after it is called. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-03network drivers: eliminate unneeded kill_vid codeStephen Hemminger
Many drivers had code that did kill_vid, but they weren't doing vlan filtering. With new API the stub is unneeded unless device sets NETIF_F_HW_VLAN_FILTER. Bad habit: I couldn't resist fixing a couple of nearby style things in acenic, and forcedeth. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-06RDMA/cxgb3: Support for new abort logicSteve Wise
The HW now posts 2 ABORT_RPL and/or PEER_ABORT_REQ messages. We need to handle them by silenty dropping the 1st but mark that we're ready for the final message. This plugs some close races between the uP and HW. Also update the minimum required firmware version. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-25[SK_BUFF]: Introduce skb_copy_to_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying to linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-04-25[SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-04-25[SK_BUFF]: Convert skb->tail to sk_buff_data_tArnaldo Carvalho de Melo
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_transport_header(skb)Arnaldo Carvalho de Melo
For the places where we need a pointer to the transport header, it is still legal to touch skb->h.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce tcp_hdr(), remove skb->h.thArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_transport_offset()Arnaldo Carvalho de Melo
For the quite common 'skb->h.raw - skb->data' sequence. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_reset_transport_header(skb)Arnaldo Carvalho de Melo
For the common, open coded 'skb->h.raw = skb->data' operation, so that we can later turn skb->h.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple cases: skb->h.raw = skb->data; skb->h.raw = {skb_push|[__]skb_pull}() The next ones will handle the slightly more "complex" cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce ip_hdr(), remove skb->nh.iphArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_network_offset()Arnaldo Carvalho de Melo
For the quite common 'skb->nh.raw - skb->data' sequence. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_reset_network_header(skb)Arnaldo Carvalho de Melo
For the common, open coded 'skb->nh.raw = skb->data' operation, so that we can later turn skb->nh.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_reset_mac_header(skb)Arnaldo Carvalho de Melo
For the common, open coded 'skb->mac.raw = skb->data' operation, so that we can later turn skb->mac.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo
One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>