aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/e1000
AgeCommit message (Collapse)Author
2006-08-02[E1000]: Convert to netdev_alloc_skbDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-14e1000: bump version to 7.1.9-k4Auke Kok
Bump the version to 7.1.9-k4 to indicate three extra changes. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-07-14e1000: fix panic on large frame receive when mtu=defaultAuke Kok
A panic was reported when receiving 1522 size packets if using the default MTU. we should set the initial rx buffer length to the value that e1000changemtu sets so that we can receive any packet that would not be dropped by LPE=0. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke.jan.h.kok@intel.com>
2006-07-14e1000: remove CRC bytes from measured packet lengthAuke Kok
After removing the hardware CRC stripping which causes problems with SOL and related issues, we need to compensate for this changed size. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-07-14e1000: Redo netpoll fix to address community concernsAuke Kok
The original suggested fix for netpoll was found to be racy on SMP kernels. While it is highly unlikely that this race would ever be seen in the real world due to current netpoll usage models, we implemented this updated fix to address concerns. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-07-12[PATCH] e1000: irq naming updateAndrew Morton
Use the new names. Cc: Auke Kok <auke-jan.h.kok@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-09Merge commit master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 of HEADLinus Torvalds
* HEAD: [AX.25]: Use kzalloc [ATM] net/atm/clip.c: fix PROC_FS=n compile [PKT_SCHED]: act_api: Fix module leak while flushing actions [NET]: Fix IPv4/DECnet routing rule dumping [NET] gso: Fix up GSO packets with broken checksums [NET] gso: Add skb_is_gso [IRDA]: fix drivers/net/irda/ali-ircc.c:ali_ircc_init() [ATM]: fix possible recursive locking in skb_migrate() [ATM]: Typo in drivers/atm/Kconfig... [TG3]: add amd8131 to "write reorder" chipsets [NET]: Fix network device interface printk message priority
2006-07-08[NET] gso: Add skb_is_gsoHerbert Xu
This patch adds the wrapper function skb_is_gso which can be used instead of directly testing skb_shinfo(skb)->gso_size. This makes things a little nicer and allows us to change the primary key for indicating whether an skb is GSO (if we ever want to do that). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-05Merge branch 'upstream' of git://lost.foo-projects.org/~ahkok/git/netdev-2.6 ↵Jeff Garzik
into upstream Conflicts: drivers/net/e1000/e1000_main.c
2006-07-02[PATCH] irq-flags: drivers/net: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-27e1000: increase version to 7.1.9-k2Auke Kok
Increment the version to 7.1.9-k2 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: add ich8lan device ID'sAuke Kok
Add the device ID's of the supported ICH8 LAN devices. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: allow user to disable ich8 lock loss workaroundAuke Kok
The workaround for the ich8 lock loss problem is only needed for a very small amount of systems. This adds an option for the user to disable the workaround. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: integrate ich8 support into driverAuke Kok
This hooks up the ich8 structure into the driver itself. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: add ich8lan core functionsAuke Kok
This implements the core new functions needed for ich8's internal NIC. This includes: * ich8 specific read/write code * flash/nvm access code * software semaphore flag functions * 10/100 PHY (fe - no gigabit speed) support for low-end versions * A workaround for a powerdown sequence problem discovered that affects a small number of motherboard. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: disable ERTAuke Kok
Hardware is reported to have problems with ERT. We disable it for all hardware to make sure we are not seeing unexplainable user problems. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: check return value of _get_speed_and_duplexAuke Kok
We were not checking the return value of get_speed_and_duplex properly, whih may contain an error value. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: M88 PHY workaroundAuke Kok
M88 rev 2 PHY needs a longer downshift to function properly. This adds a much longer downshift counter for this specific device. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: fix adapter led blinking inconsistencyAuke Kok
Several e1000 adapters were not blinking correctly or inconsistently. This patch cleans this up and makes them all behave the same as far as possible. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: disable CRC stripping workaroundAuke Kok
CRC stripping is breaking SMBUS-connected BMC's. We disable this feature to make it work. This fixes related bugs regarding SOL. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: force register write flushes to circumvent broken platformsAuke Kok
A certain AMD64 bridge (8132) has an option to turn on write combining which breaks our adapter. To circumvent this we need to flush every write. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: rework module param code with uninitialized valuesAuke Kok
We can take uninitialized values into account which minimizes code and allows us to simplify the parameter checking code greatly. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: recycle skbAuke Kok
Recycle an skb to improve performance a bit. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: change printk into DPRINTKAuke Kok
Changing a printk message to make clear that this message is originating from e1000. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: add smart power down codeAuke Kok
Smart Power Down is a power saving feature in newer e1000 hardware. We disable it because it causes time to link to be long, but make it a user choice. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: small performance tweak by removing double codeAuke Kok
buffer_info is already filled at the end of this while() loop. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: fix CONFIG_PM blocksAuke Kok
e1000_suspend is called even when !CONFIG_PM. The non-PM code inside of it is properly #ifdef'd. This fixes the compiler warnings when !CONFIG_PM. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: Make PHY powerup/down a functionAuke Kok
In relation to the irq work done earlier we also move the PHY powerup and powerdown functions into separate functions and move the calls to _close and _open, making the PHY stay in it's power state as long as the device is _up. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: rework driver hardware reset lockingAuke Kok
After studying the driver mac reset code it was found that there were multiple race conditions possible to reset the unit twice or bring it e1000_up() double. This fixes all occurences where the driver needs to reset the mac. We also remove irq requesting/releasing into _open and _close so that while the device is _up we will never touch the irq's. This fixes the double free irq bug that people saw. To make sure that the watchdog task doesn't cause another race we let it run as a non-scheduled task. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-27e1000: fix loopback ethtool testAuke Kok
Ethtool was reporting that loopback failed randomly on esb2 systems. Upon study it was found that the phy manual was changed with respect to the loopback mode bits. The new value fixes it. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-23[NET]: Merge TSO/UFO fields in sk_buffHerbert Xu
Having separate fields in sk_buff for TSO/UFO (tso_size/ufo_size) is not going to scale if we add any more segmentation methods (e.g., DCCP). So let's merge them. They were used to tell the protocol of a packet. This function has been subsumed by the new gso_type field. This is essentially a set of netdev feature bits (shifted by 16 bits) that are required to process a specific skb. As such it's easy to tell whether a given device can process a GSO skb: you just have to and the gso_type field and the netdev's features field. I've made gso_type a conjunction. The idea is that you have a base type (e.g., SKB_GSO_TCPV4) that can be modified further to support new features. For example, if we add a hardware TSO type that supports ECN, they would declare NETIF_F_TSO | NETIF_F_TSO_ECN. All TSO packets with CWR set would have a gso_type of SKB_GSO_TCPV4 | SKB_GSO_TCPV4_ECN while all other TSO packets would be SKB_GSO_TCPV4. This means that only the CWR packets need to be emulated in software. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-11[PATCH] e1000: prevent statistics from getting garbled during resetLinas Vepstas
If a PCI bus error/fault triggers a PCI bus reset, attempts to get the ethernet packet count statistics from the hardware will fail, returning garbage data upstream. This patch skips statistics data collection if the PCI device is not on the bus. This patch presumes that an earlier patch, [PATCH] PCI Error Recovery: e1000 network device driver has already been applied. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-09e1000: prevent statistics from garbling during bus resetsAuke Kok
If a PCI bus error/fault triggers a PCI bus reset, attempts to get the ethernet packet count statistics from the hardware will fail, returning garbage data upstream. This patch skips statistics data collection if the PCI device is not on the bus. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Acked-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-08Merge branch 'upstream' of git://lost.foo-projects.org/~ahkok/git/netdev-2.6 ↵Jeff Garzik
into tmp
2006-06-08Merge branch 'upstream-fixes' into upstreamJeff Garzik
Conflicts: drivers/net/e1000/e1000_ethtool.c
2006-06-08e1000: add PCI Error RecoveryAuke Kok
Various PCI bus errors can be signaled by newer PCI controllers. This patch adds the PCI error recovery callbacks to the intel gigabit ethernet e1000 device driver. The patch has been tested, and appears to work well. Signed-off-by: Linas Vepstas <linas@linas.org> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-08e1000: remove risky prefetch on next_skb->dataAuke Kok
It was brought to our attention that the prefetches break e1000 traffic on xscale/arm architectures. Remove them for now. We'll let them stay in mm for a while, or find a better solution to enable. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-08e1000: fix ethtool test irq alloc as "probe"Auke Kok
New code added in 2.6.17 caused setup_irq to print a warning when running ethtool -t eth0 offline. This test marks the request_irq call made by this test as a "probe" to see if the interrupt is shared or not. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-05-26e1000: add shutdown handler back to fix WOLAuke Kok
Someone was waaay too aggressive and removed e1000's reboot notifier instead of porting it to the new way of the shutdown handler. This change broke wake on lan. Add the shutdown handler back in using the same method as e100 uses. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> (cherry picked from c653e6351e371b33b29871e5eedf610ffb3be037 commit)
2006-05-26[PATCH] e1000: endian fixesAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Ronciak, John" <john.ronciak@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-23e1000: bump version to 7.0.38-k4Auke Kok
Signed-off-by: Auke Kok <auke.jan.h.kok@intel.com>
2006-05-23e1000: remove changelog in driverAuke Kok
This honours the request to remove the changelog in the driver code. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-05-23e1000: Fix date string in MakefileAuke Kok
I forgot to update the date string in the Makefile last time. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-05-23e1000: remove leading and trailing whitespace.Auke Kok
Some leading and trailing whitespace made it into the driver code here. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-05-23e1000: remove backslash r debug printfsAuke Kok
This removes unwanted characters in the debug output that should have never been there. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-05-23e1000: add shutdown handler back to fix WOLAuke Kok
Someone was waaay too aggressive and removed e1000's reboot notifier instead of porting it to the new way of the shutdown handler. This change broke wake on lan. Add the shutdown handler back in using the same method as e100 uses. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-04-25e1000: Update truesize with the length of the packet for packet splitAuke Kok
Update skb with the real packet size. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
2006-04-18e1000: fix mismerge skb_put.Auke Kok
Seems there was a bit of a fix needed to due a bad merge in the legacy receive path. Fixes a panic due to skb_over_panic. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-04-18e1000: fix mispatch for media type detect.Auke Kok
Recent patch was mismerged in the miitool path. e1000_media_type_copper was being compared with the phy type instead of the media type. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-24 17:36:17 +0000