aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ehea
AgeCommit message (Collapse)Author
2009-01-06net/ehea: use consistant typeStephen Rothwell
ehea_plpar_hcall9() takes an "unsigned long" array to return its results, so change the arrays we pass to it to match. This is currently only 64 bit code, so the transformation is actually a noop, but because ehea_plpar_hcall9() copies the values of registers into the array, if this was ported to a 32 bit hypervisor interface "unsigned long" would probably still be the correct type. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-05net/ehea: bitops work on unsigned longsStephen Rothwell
The flags field of struct ehea_port is only used with test_bit(), clear_bit() and set_bit() and these interfaces only work on "unsigned long"s, so change the field to be an "unsigned long". Also, this field only has two bits defined for it (0 and 1) so will still be fine if someone builds this driver for a 32 bit arch (at least as far as this flags field is concerned). Also note that ehea_driver_flags is only used in ehca_main.c, so make it static in there. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-28net: ehea NAPI interface cleanup fixStephen Rothwell
Commit 908a7a16b852ffd618a9127be8d62432182d81b4 ("net: Remove unused netdev arg from some NAPI interfaces") missed two spots. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-25ehea: use get_zeroed_page for alignment-sensitive allocationNathan Lynch
With slub debug enabled, I see the following errors and crash with 2.6.28-rc9: IBM eHEA ethernet device driver (Release EHEA_0095) ehea: Error in ehea_h_register_rpage_mr: not on pageboundary ehea: Error in ehea_reg_mr_section: register_rpage_mr failed ehea: Error in ehea_reg_kernel_mr: registering mr failed ehea: Error in ehea_setup_ports: creating MR failed ehea 23c00100.lhea: setup_ports failed Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6bbdcb Faulting instruction address: 0xd000000000064a24 cpu 0x0: Vector: 300 (Data Access) at [c0000000740e7190] pc: d000000000064a24: .ehea_update_firmware_handles+0x84/0x47c [ehea] lr: d00000000006df34: .ehea_probe_adapter+0x35c/0x39c [ehea] sp: c0000000740e7410 msr: 8000000000009032 dar: 6b6b6b6b6b6bbdcb dsisr: 40000000 current = 0xc000000074233780 paca = 0xc0000000008a3300 pid = 2046, comm = modprobe enter ? for help [c0000000740e74f0] d00000000006df34 .ehea_probe_adapter+0x35c/0x39c [ehea] [c0000000740e75a0] c00000000041d5a4 .of_platform_device_probe+0x78/0xb0 [c0000000740e7630] c0000000002d8b38 .driver_probe_device+0x13c/0x200 [c0000000740e76c0] c0000000002d8c90 .__driver_attach+0x94/0xd8 [c0000000740e7750] c0000000002d7d64 .bus_for_each_dev+0x80/0xd8 [c0000000740e7800] c0000000002d889c .driver_attach+0x28/0x40 [c0000000740e7880] c0000000002d8340 .bus_add_driver+0xd4/0x284 [c0000000740e7920] c0000000002d90a0 .driver_register+0xc4/0x198 [c0000000740e79d0] c00000000041d45c .of_register_driver+0x4c/0x60 [c0000000740e7a50] c000000000020ef8 .ibmebus_register_driver+0x30/0x4c [c0000000740e7ae0] d00000000006e108 .ehea_module_init+0x194/0x208c [ehea] [c0000000740e7b90] c000000000009028 .do_one_initcall+0x90/0x1ac [c0000000740e7d90] c00000000008619c .sys_init_module+0xc4/0x200 [c0000000740e7e30] c0000000000084ac syscall_exit+0x0/0x40 (When slub debug is disabled it works fine.) PAGE_SIZE allocations via slab are not guaranteed to be page-aligned; use get_zeroed_page for the 'pt' buffer (I don't really know what this is, only that it is passed to firmware and that the first error message complains about its alignment). This allows the system to boot. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-25drivers/net/ehea: Remove redundant testJulia Lawall
In each case, vpage is checked not to be NULL just after it is initialized at the beginning of each loop iteration. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22net: Remove unused netdev arg from some NAPI interfaces.Neil Horman
When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-06ehea: Fix some whitespace issuesHannes Hering
This patch removes some trailing whitespaces and spaces before tabs. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03drivers/net: Kill now superfluous ->last_rx stores.David S. Miller
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27ehea: Detect 16GB hugepages for firmware restrictionThomas Klein
All kernel memory which is used for kernel/hardware data transfer must be registered with firmware using "memory regions". 16GB hugepages may not be part of a memory region due to firmware restrictions. This patch modifies the walk_memory_resource callback fn to filter hugepages and add only standard memory to the busmap which is later on used for MR registration. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22ehea: Fix memory hotplug supportHannes Hering
This patch implements the memory notifier to update the busmap instantly instead of rebuilding the whole map. This is necessary because walk_memory_resource provides different information than required during memory hotplug. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-25Revert "ehea: fix mutex and spinlock use"David S. Miller
This reverts commit 2eefbd63d0c85daa1317636474c226e236beba81. On request by driver author and Jeff Garzik. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-24ehea: Enable DLPAR memory removeHannes Hering
This patch adds the capability flag to the capability list for dynamic LPAR memory remove to enable this feature. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ehea: fix mutex and spinlock useSebastien Dugue
Looks like to me that the ehea_fw_handles.lock mutex and the ehea_bcmc_regs.lock spinlock are taken much longer than necessary and could as well be pushed inside the functions that need them (ehea_update_firmware_handles() and ehea_update_bcmc_registrations()) rather than at each callsite. Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ehea: Fix DLPAR memory handlingHannes Hering
The ehea busmap must be allocated only once in the first of many calls of the ehea_create_busmap_callback. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ehea: fix phyp debugging typoSebastien Dugue
Fix typo in ehea_h_query_ehea() which prevents building when DEBUG is on. Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30drivers/net/ehea/ehea_main.c: Release mutex in error handling codeJulia Lawall
The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04ehea: Access iph->tot_len with correct endiannessRoland Dreier
iph->tot_len is stored in network byte order, so access it using ntohs(). This doesn't have any real world impact on ehea, since ehea only exists for big-endian platfroms (at the moment at least) but fixing this gets rid of a sparse warning and avoids having a bad example in the tree. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04ehea: fix race conditionJan-Bernd Themann
When ehea_stop is called the function cancel_work_sync(&port->reset_task) is used to ensure that the reset task is not running anymore. We need an additional flag to ensure that it can not be scheduled after this call again for a certain time. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04ehea: add MODULE_DEVICE_TABLEJan-Bernd Themann
Required to allow distros to easily detect when ehea module needs to be loaded Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04ehea: fix might sleep problemJan-Bernd Themann
A mutex has to be replaced by spinlocks as it can be called from a context which does not allow sleeping. The kzalloc flag GFP_KERNEL has to be replaced by GFP_ATOMIC for the same reason. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-12net: Eliminate flush_scheduled_work() calls while RTNL is held.David S. Miller
If the RTNL is held when we invoke flush_scheduled_work() we could deadlock. One such case is linkwatch, it is a work struct which tries to grab the RTNL semaphore. The most common case are net driver ->stop() methods. The simplest conversion is to instead use cancel_{delayed_}work_sync() explicitly on the various work struct the driver uses. This is an OK transformation because these work structs are doing things like resetting the chip, restarting link negotiation, and so forth. And if we're bringing down the device, we're about to turn the chip off and reset it anways. So if we cancel a pending work event, that's fine here. Some drivers were working around this deadlock by using a msleep() polling loop of some sort, and those cases are converted to instead use cancel_{delayed_}work_sync() as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-10ehea: set mac address fixJan-Bernd Themann
eHEA has to call firmware functions in order to change the mac address of a logical port. This patch checks if the logical port is up when calling the register / deregister mac address calls. If the port is down these firmware calls would fail and are therefore not executed. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22drivers/net/ehea - remove unnecessary memset after kzallocJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22ehea: Fix use after free on rebootBrian King
Fixes the following use after free oops: ehea: Reboot: freeing all eHEA resources Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6c5b Faulting instruction address: 0xd000000000354488 cpu 0x0: Vector: 300 (Data Access) at [c00000002ec6f310] pc: d000000000354488: .ehea_shutdown_single_port+0x50/0x78 [ehea] lr: d00000000035447c: .ehea_shutdown_single_port+0x44/0x78 [ehea] sp: c00000002ec6f590 msr: 8000000000009032 dar: 6b6b6b6b6b6b6c5b dsisr: 40000000 current = 0xc0000000281412e0 paca = 0xc0000000006df300 pid = 10930, comm = reboot enter ? for help [c00000002ec6f590] d00000000035d64c .ehea_remove+0x44/0x124 [ehea] (unreliable) [c00000002ec6f630] c000000000319f88 .of_platform_device_remove+0x40/0x58 [c00000002ec6f6a0] c000000000291018 .__device_release_driver+0xb0/0xf0 [c00000002ec6f730] c000000000291120 .driver_detach+0xc8/0xfc [c00000002ec6f7c0] c00000000028fe24 .bus_remove_driver+0xb4/0x114 [c00000002ec6f850] c000000000291768 .driver_unregister+0x54/0x74 [c00000002ec6f8e0] c00000000031a0c8 .of_unregister_driver+0x14/0x28 [c00000002ec6f950] c000000000023ba0 .ibmebus_unregister_driver+0x10/0x24 [c00000002ec6f9c0] d000000000354180 .ehea_reboot_notifier+0x30/0x4c [ehea] [c00000002ec6fa40] c0000000003c95a8 .notifier_call_chain+0x5c/0xcc [c00000002ec6fae0] c000000000082cd4 .__blocking_notifier_call_chain+0x70/0xb0 [c00000002ec6fb90] c000000000075cf8 .kernel_restart_prepare+0x24/0x58 [c00000002ec6fc10] c000000000075f0c .kernel_restart+0x20/0x6c [c00000002ec6fc90] c000000000078674 .sys_reboot+0x1d4/0x290 [c00000002ec6fe30] c0000000000086ac syscall_exit+0x0/0x40 Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13ehea: Add DLPAR memory remove supportHannes Hering
The eHEA driver uses the recently modified walk_memory_resource for powerpc functionality to detect the memory layout. It further uses the memory hotplug notifiers to catch memory hotplug events. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25ehea: make things staticAndrew Morton
ehea_flush_sq() and ehea_purge_sq() should be static. Cc: Jeff Garzik <jeff@garzik.org> Cc: Thomas Klein <osstklei@de.ibm.com> Cc: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/ehea/ehea_main.c drivers/net/wireless/iwlwifi/Kconfig drivers/net/wireless/rt2x00/rt61pci.c net/ipv4/inet_timewait_sock.c net/ipv6/raw.c net/mac80211/ieee80211_sta.c
2008-04-12ehea: Fix DLPAR memory add supportThomas Klein
This patch fixes two weaknesses in send/receive packet handling which may lead to kernel panics during DLPAR memory add operations. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-03-28netdev: ehea: port_lock semaphore to mutexDaniel Walker
Convert the port_lock to a mutex. There is also some additional cleanup. The line length inside the ehea_rereg_mrs was getting long so I made some adjustments to shorten them. [akpm@linux-foundation.org: dec99ification] Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: Christoph Raisch <raisch@de.ibm.com> Cc: Jan-Bernd Themann <themann@de.ibm.com> Cc: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-28netdev: ehea: bcmc_regs semaphore to mutexDaniel Walker
Convert the ehea_bcmc_regs.lock to a mutex. Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: Christoph Raisch <raisch@de.ibm.com> Cc: Jan-Bernd Themann <themann@de.ibm.com> Cc: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-28netdev: ehea: locking order correctionDaniel Walker
Nested locks always need to be taken in the same order. This change factors out the ehea_fw_handles.lock to make the locking order consistent. Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: Christoph Raisch <raisch@de.ibm.com> Cc: Jan-Bernd Themann <themann@de.ibm.com> Cc: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-28netdev: ehea: ehea_fw_handles semaphore to mutexDaniel Walker
Converted the ehea_fw_handles.lock to a mutex. Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: Christoph Raisch <raisch@de.ibm.com> Cc: Jan-Bernd Themann <themann@de.ibm.com> Cc: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-28netdev: ehea: semaphore to mutexDaniel Walker
Converted the dlpar_mem_lock. With a bit of cleanup, I converted to DEFINE_MUTEX() instead of a runtime init. I also made the lock static. Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: Christoph Raisch <raisch@de.ibm.com> Acked-by: Jan-Bernd Themann <themann@de.ibm.com> Cc: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25ehea: Fix IPv6 supportThomas Klein
Indicate that HEA calculates IPv4 checksums only Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23ehea: add kdump supportThomas Klein
This patch adds kdump support to the ehea driver. As the firmware doesn't free resource handles automatically, the driver has to run an as simple as possible free resource function in case of a crash shutdown. The function iterates over two arrays freeing all resource handles which are stored there. The arrays are kept up-to-date during normal runtime. The crash handler fn is triggered by the recently introduced PPC crash shutdown reg/unreg functions. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-03ehea: fix sysfs link compile problemJan-Bernd Themann
Due to changes in the struct device_driver there is no direct access to its kobj any longer. The kobj was used to create sysfs links between eHEA ethernet devices and the driver. This patch removes the affected sysfs links to resolve the build problems. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03ehea: fix qmr checkpatch complaintsDoug Maxey
Cc: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Doug Maxey <dwm@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03ehea: fix phyp checkpatch complaintsDoug Maxey
Cc: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Doug Maxey <dwm@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03ehea: fix main checkpatch complaintsDoug Maxey
Cc: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Doug Maxey <dwm@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03ehea: fix ethtool checkpatch complaintsDoug Maxey
Cc: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Doug Maxey <dwm@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03ehea: fix ehea.h checkpatch complaintsDoug Maxey
Cc: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Doug Maxey <dwm@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-23ehea: Reworked rcv queue handling to log only fatal errorsThomas Klein
Prevent driver from brawly logging packet checksum errors. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23ehea: Improve tx packets countingThomas Klein
Using own tx_packets counter instead of firmware counters. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-29ehea: add kexec supportJan-Bernd Themann
eHEA resources that are allocated via H_CALLs have a unique identifier each. These identifiers are necessary to free the resources. A reboot notifier is used to free all eHEA resources before the indentifiers get lost, i.e before kexec starts a new kernel. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-25ehea: fix port_napi_disable/enableJan-Bernd Themann
napi_disable / napi_enable must be applied on all ehea queues. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18Add missing newlines to some uses of dev_<level> messagesJoe Perches
Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17[POWERPC] ibmebus: Move to of_device and of_platform_driver, match eHCA and ↵Joachim Fenkes
eHEA drivers Replace struct ibmebus_dev and struct ibmebus_driver with struct of_device and struct of_platform_driver, respectively. Match the external ibmebus interface and drivers using it. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Roland Dreier <rolandd@cisco.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-10ehea: use kernel event queueJan-Bernd Themann
eHEA recovery and DLPAR functions are called seldomly. The eHEA workqueues are replaced by the kernel event queue. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10ehea: DLPAR memory add fixJan-Bernd Themann
Due to stability issues in high load situations the HW queue handling has to be changed. The HW queues are now stopped and restarted again instead of destroying and allocating new HW queues. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[netdrvr] Stop using legacy hooks ->self_test_count, ->get_stats_countJeff Garzik
These have been superceded by the new ->get_sset_count() hook. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>