aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/igb
AgeCommit message (Collapse)Author
2009-09-14igb: do not allow phy sw reset code to make calls to null pointersAlexander Duyck
In the case of fiber and serdes adapters we were seeing issues with ethtool -t causing kernel panics due to null function pointers. To prevent this we need to exit out of the phy reset code in the event that we do not have a valid phy. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14igb: reset sgmii phy at start of initAlexander Duyck
Our SGMII phy code was incomplete in that it was not actually placing the phy in SGMII mode and as a result the PHY was not able to establish a link when connected to a non serdes link partner. This patch updates the code to combine the SGMII/serdes PCS init and to add the necessary reset. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03netdev: Remove redundant checks for CAP_NET_ADMIN in MDIO implementationsBen Hutchings
dev_ioctl() already checks capable(CAP_NET_ADMIN) before calling the driver's implementation of MDIO ioctls. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03igb: set vf rlpml wasn't taking vlan tag into accountAlexander Duyck
This patch updates things so that vlan tags are taken into account when setting the receive large packet maximum length. This allows the VF driver to correctly receive full sized frames when vlans are enabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03igb: only disable/enable interrupt bits for igb physical functionAlexander Duyck
The igb_irq_disable/enable calls were causing virtual functions associated with the igb physical function to have their interrupts disabled. In order to prevent this from occuring we should only clear/set the bits related to the physical function. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03igb: add support for set_rx_mode netdevice operationAlexander Duyck
This patch adds support for the set_rx_mode netdevice operation so that igb can better support multiple unicast addresses. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02netdev: drivers should make ethtool_ops constStephen Hemminger
No need to put ethtool_ops in data, they should be const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01intel: convert drivers to netdev_tx_tStephen Hemminger
Get rid of some bogus return wrapping as well. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-26igb/ixgbe: add IPV6_CSUM support to vlan_featuresAlexander Duyck
We were already exporting TSO6 to the vlan, but we weren't exporting the checksum support for IPV6 which was causing warning messages to be displayed when doing IPv6 TSO over a vlan. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: initialize mailbox function pointers prior to phy initAlexander Duyck
The igb driver is currently initializing the mailbox function pointers after the phy. This causes issues as the phy init will return from the function early if there is no phy present. To resolve this I have moved the function pointer init to a location prior to the phy initialization so that serdes based adapters can also make use of SR-IOV. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: cleanup flow control configuration to make requested/current more clearAlexander Duyck
This patch cleans up the flow control configuration for igb to make it a bit more readable in regards to what the requested and current modes are. This should help with the maintainability of the current igb driver in regards to flow control. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: use buffer_info->dma instead of shinfo->nr_frags to determine unmapAlexander Duyck
This change makes it so that we use buffer_info->dma instead of shinfo->nr_frags to determine if we need to unmap a received skb. By doing this we can avoid a cache miss on small packets since the buffer_info structure should already be prefetched. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: add support for 82576 mezzanine cardAlexander Duyck
This patch adds support for a new 82576 mezzanine adapter. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: remove unused switch statement from igb_set_wolAlexander Duyck
There is a switch statement in igb_set_wol that defaults to break and doesn't actually do anything. As such it should be removed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: cleanup receive address register initializationAlexander Duyck
This update cleans up the receive address register initialization. The main purpose of this is to clean out some redundancy that was introduced due to having multiple ways of setting the receive address registers. Instead of having a specialized function to set one register and one to set all of them it makes more sense to just go through the list calling the function that is needed to set the individual registers. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: move all multicast addresses into multicast table arrayAlexander Duyck
This patch moves all of the multicast addresses out of the free Receive address registers and instead programs them all into the multicast table array. As a result the multicast filtering may not be as precise, but it also greatly reduces the overhead for multicast addresses. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: add completion timeout workaround for 82575/82576Alexander Duyck
The 82575 and 82576 hardware can both experience data corruption issues if a pci-e completion arrives after the timeout value. In order to avoid this we need to increase the timeout value while pci-e master is disabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: do not overwrite EEPROM LED settingsAlexander Duyck
The igb driver was overwritting the LED settings that were configured via EEPROM. This is not correct behavior as the LED settings are meant to be configured by EEPROM and not changed. This change removes the code that was setting the LED behavior on the interface. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: change configure_pcs_link to void since it always returns 0Alexander Duyck
Since igb_configure_pcs_link always returns 0 there isn't really much point to checking for the result so it is best just to change this to a void so we can properly ignore the return result. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: make serdes power down available for 82575 in addition to 82576 partsAlexander Duyck
There was a serdes power down workaround that was originally added for 82576 fiber. However it has also been found that this workaround is needed for serdes connections as well. In addition it is also needed for 82575 serdes so we we need to remove the checks restricting it to 82576. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: remove media type fiber as it is misleadingAlexander Duyck
The current igb driver only supports copper and serdes. The fiber media type is a holdover from earlier NICs as the current nics supported by igb all use serdes when communicating over a fiber connection. As a result we can remove media type fiber without losing any functionality. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-13igb: gcc-3.4.6 fixEric Dumazet
forward declaration of inline function should be avoided, or old gcc cannot compile. Reported-by: Teck Choon Giam <giamteckchoon@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08igb: set lan id prior to configuring phyAlexander Duyck
The igb driver was defaulting to using the lock for pci-e function 0 for all of the phys due to the fact that the lan id was not being set prior to initialization. This change makes it so that the function id is set prior to checking for the phy id. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-30igb: return PCI_ERS_RESULT_DISCONNECT on permanent errorAlexander Duyck
PCI drivers that implement the io_error_detected callback should return PCI_ERS_RESULT_DISCONNECT if the state passed in is pci_channel_io_perm_failure. This patch fixes the issue for igb. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-30igb: fix unmap length bugJesse Brandeburg
driver was mixing NET_IP_ALIGN count bytes in map/unmap calls unevenly. Only map the bytes that the hardware might dma into also fix unmap related bug where ->dma was not being cleared after unmap Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-08net: skb_shared_info optimizationEric Dumazet
skb_dma_unmap() is quite expensive for small packets, because we use two different cache lines from skb_shared_info. One to access nr_frags, one to access dma_maps[0] Instead of dma_maps being an array of MAX_SKB_FRAGS + 1 elements, let dma_head alone in a new dma_head field, close to nr_frags, to reduce cache lines misses. Tested on my dev machine (bnx2 & tg3 adapters), nice speedup ! Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: dont update dev->trans_startEric Dumazet
Second round of drivers for Gb cards (and NIU one I forgot in the 10GB round) Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-26igb/e1000e: update PSSR_MDIX value to reflect correct bitAlexander Duyck
The phy port status register has the MDI-X status bit on bit 11, not bit 3 as is currently setup in the define. This patch corrects that so the correct bit is checked on igp PHY types. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-26igb: Record host memory receive overflow in net_statsJesper Dangaard Brouer
Based on previous patch from Jesper Dangaard Brouer. The RNBC (Receive No Buffers Count) register for the 82576, indicate that frames were received when there were no available buffers in host memory to store those frames (receive descriptor head and tail pointers were equal). The packet is still received by the NIC if there is space in the FIFO on the NIC. As the RNBC value is not a packet drop, the driver stores this value in net_stats.rx_fifo_errors to indicate that there were no system buffers available for the incoming packet. Actual dropped packets are counted in the MPC value. Saving the stats in dev->net_stats makes it visible via /proc/net/dev as "fifo", and thus viewable to ifconfig as "overruns" and 'netstat -i' as "RX-OVR". The Receive No Buffers Count (RNBC) can already be queried by ethtool -S as "rx_no_buffer_count". Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-26igb: Implement reading of reg RQDPC (Receive Queue Drop Packet Count)Jesper Dangaard Brouer
Based on the previous patches from Jesper Dangaard Brouer <hawk@comx.dk> Implement reading the per queue drop stats register RQDPC (Receive Queue Drop Packet Count). It counts the number of packets dropped by a queue due to lack of descriptors available. Notice RQDPC (Receive Queue Drop Packet Count) stats only gets incremented, if the DROP_EN bit it set (in the SRRCTL register for that queue). If DROP_EN bit is NOT set, then the some what equivalent count is stored in RNBC (not per queue basis). The RQDPC register is only 12 bit, thus the precision might suffer due to overrun in-netween the watchdog polling interval. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-26igb: add RQDPC (Receive Queue Drop Packet Count) register macroJeff Kirsher
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-21igb: do not re-register DCA requester on device resetAlexander Duyck
The current driver is re-registering the DCA requester after every reset. Instead of doing this we should only be updating the on board DCA registers and not unregistering/re-registering our requester. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: include/net/tcp.h
2009-05-07e1000/e1000e/igb/ixgb: don't txhang after link downJesse Brandeburg
after the recent changes to wired drivers to use only netif_carrier_off the driver can have outstanding tx work to complete that will never complete once link is down. Since the intel hardware will hold this tx work forever, the driver notices a tx timeout condition internally and might try to instigate printk and reset of the part with a netif_stop_queue, which doesn't work because link is down. Don't bother arming to tx hang detection when link is down. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06igb: resolve panic on shutdown when SR-IOV is enabledAlexander Duyck
The setup_rctl call was making a call into the ring structure after it had been freed. This was causing a panic on shutdown. This call wasn't necessary since it is possible to get the needed index from adapter->vfs_allocated_count. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06igb/igbvf: set rx csum always enabled in hw, disable via swAlexander Duyck
An issue was found in which rx checksum could not be enabled without resetting the interface. The issue was the hardware enable was not being done via ethtool. To resolve this issue and prevent conflicts with VF configuration we will leave the feature always enabled in hardware, and then in software we will choose to ignore the results via a sw flag. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-28igb: Enable SCTP checksum offloadingJesse Brandeburg
Originally from: Vlad Yasevich <vladislav.yasevich@hp.com> This patch, both the driver portion and the sctp code was modified by Jesse Brandeburg and is Copyright(c) 2009 Intel Corporation. Thanks go to Vlad for starting this work. Intel 82576 chipset supports SCTP checksum offloading. This patch enables this functionality in the driver. A new NETIF feature is introduced for SCTP checksum offload. If the driver supports CRC32c checksum, it can set this feature flag. The hardware can offload both transmit and receive. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-28igb/ixgbe: remove unecessary checks for CHECKSUM_UNNECESSARYAlexander Duyck
Both of these drivers do a check to verify ip_summed is set to CHECKSUM_UNNECESSARY prior to passing the packet to GRO. GRO itself already does such a check so it is redundant and can be removed as this will likely cause out of order issues when receiving a packet that didn't pass checksum validation. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-28igb: make rxcsum configuration seperate from multiqueueAlexander Duyck
The igb driver was being incorrectly setup to only allow disabling receive checksum if multiqueue was disabled. This change corrects that so that RXCSUM is configured regardless of queue configuration. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-28igb: reconfigure mailbox timeout logicAlexander Duyck
This change updates the timeout logic so that it is not possible to have a sucessful check for message and still return an error if countdown = 0. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reported-by: Juha Leppanen <juha_motorsportscom@luukku.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-27igb: always use adapter->itr as EITR valueAlexander Duyck
The igb driver was switching between adapter->itr containing the EITR value and the number of interrupts per second. This resulted in high latencies being seen after brining the interface down and then back up. To resolve the issue the itr value will now only contain the value that should be programmed into EITR. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-22e1000/e1000e/igb/ixgb: do not use netif_wake_queue un-necessarilyJesse Brandeburg
It was pointed out that the Intel wired ethernet drivers do not need to wake the tx queue since netif_carrier_on/off will take care of the qdisc management in order to guarantee the correct handling of the transmit routine enable state. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-20igb: fix link down inital stateJesse Brandeburg
As reported by Andrew Lutomirski <amluto@gmail.com> All the intel wired ethernet drivers were calling netif_carrier_off and netif_stop_queue (or variants) before calling register_netdevice This is incorrect behavior as was pointed out by davem, and causes ifconfig and friends to report a strange state before first link after the driver was loaded, since without a netif_carrier_off, the stack assumes carrier_on, but before register_netdev, netlink messages are not sent out telling link state. This apparently confused *some* versions of networkmanager. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reported-by: Andrew Lutomirski <amluto@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11igb: do not check for vf_data if we didn't enable vfsAlexander Duyck
The driver is currently dumping a message in the log about failing to allocate vf data when max_vfs is equal to 0. This change makes it so the error message is only displayed if we set max_vfs to a non zero value. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11igb: fix unused external references introduced with sr-iov changesAlexander Duyck
There were several unused external references added with the sr-iov enablement changes. This patch changes all those references to static local references. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08igb: remove sysfs entry that was used to set the number of vfsAlexander Duyck
This patch removes the sysfs entry num_vfs which was added to support enabling pci virtual functions for 82576. To prevent VFs from loading automatically a module parameter "max_vfs" was added so that the number of VFs per PF can be limited. This is especially useful when 4 or more 82576 ports are on the system because otherwise to load all VFs would result in 8 interface per physical port. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02net/igb: Fix kexec with igb (rev. 3)Rafael J. Wysocki
Impact: Fix Yinghai Lu found one system with 82575EB where, in the kernel that is kexeced, probe igb failed with -2, the reason being that the adapter could not be brought back from D3 by the kexec kernel, most probably due to quirky hardware (it looks like the same behavior happened on forcedeth). Prevent igb from putting the adapter into D3 during shutdown except when we going to power off the system. For this purpose, seperate igb_shutdown() from igb_suspend() and use the appropriate PCI PM callbacks in both of them. Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl> Reported-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-02igb: cleanup igb loopback pathAlexander Duyck
The code path for setting up phy loopback testing was out of date and was setting bits it didn't need to. This change cleans up the code path and removes some code that has no effect on teh driver. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>