aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ixgbe/ixgbe_ethtool.c
AgeCommit message (Collapse)Author
2009-12-08ixgbe: Fix TX stats accountingEric Dumazet
Here is an updated version, because ixgbe_get_ethtool_stats() needs to call dev_get_stats() or "ethtool -S" wont give correct tx_bytes/tx_packets values. Several cpus can update netdev->stats.tx_bytes & netdev->stats.tx_packets in parallel. In this case, TX stats are under estimated and false sharing takes place. After a pktgen session sending exactly 200000000 packets : # ifconfig fiber0 | grep TX TX packets:198501982 errors:0 dropped:0 overruns:0 carrier:0 Multi queue devices should instead use txq->tx_bytes & txq->tx_packets in their xmit() method (appropriate txq lock already held by caller, no cache line miss), or use appropriate locking. After patch, same pktgen session gives : # ifconfig fiber0 | grep TX TX packets:200000000 errors:0 dropped:0 overruns:0 carrier:0 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03ixgbe: performance tweaksJesse Brandeburg
drop variables that had cache lines modified in simultaneous hot paths. keep some variables modified on hot paths but make their storage per queue. cache align DMA data buffer start addresses. cache align (padding) some structures that end within a cacheline. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29ixgbe: Display currently attached PHY through ethtoolPJ Waskiewicz
This patch extends the ethtool interface to display what PHY is currently connected to a NIC. The results can be viewed in ethtool ethX output. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29ixgbe: handle parameters for tx and rx EITR, no div0Shannon Nelson
The driver was doing a divide by zero when adjusting tx-usecs. This patch removes the divide by zero code and changes the logic slightly to ignore tx-usecs in the case of shared TxRx vectors. Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23ixgbe: Modify 82599 HWRSC statistics countersMallikarjuna R Chilakala
Divide 82599 HWRSC counters into aggregated and flushed to count number of packets getting coalesced per TCP connection. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net: request_irq - Remove unnecessary leading & from second argJoe Perches
Not as fancy as coccinelle. Checkpatch errors ignored. Compile tested allyesconfig x86, not all files compiled. grep -rPl --include=*.[ch] "\brequest_irq\s*\([^,\)]+,\s*\&" drivers/net | while read file ; do \ perl -i -e 'local $/; while (<>) { s@(\brequest_irq\s*\([^,\)]+,\s*)\&@\1@g ; print ; }' $file ;\ done Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-27Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/sh_eth.c
2009-10-26ixgbe: fix memory leak when resizing rings while interface is downAlexander Duyck
This patch resolves a memory leak that occurs when you resize the rings via the ethtool -G option while the interface is down. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13ixgbe: Fix erroneous display of stats by ethtool -SAjit Khaparde
Commit 59aa3cc4 overlooked the way offsets for netdev stats were considered. Because of this some of the stats shown by ethtool -S were wrong. This patch fixes it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07ixgbe: Use the instance of net_device_stats from net_device.Ajit Khaparde
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private adapter structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30ixgbe patch to provide NIC's tx/rx counters via ethtoolBen Greear
When LRO is enabled, the received packet and byte counters represent the LRO'd packets, not the packets/bytes on the wire. The Intel 82599 NIC has registers that keep count of the physical packets. Add these counters to the ethtool stats. The byte counters are 36-bit, but the high 4 bits were being ignored in the 2.6.31 ixgbe driver: Read those as well to allow longer time between polling the stats to detect wraps. Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-21ixgbe: Allow tx itr specific settingsNelson, Shannon
Allow the user to set Tx specific itr values. This only makes sense when there are separate vectors for Tx and Rx. When the queues are doubled up RxTx on the vectors, we still only use the rx itr value. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01ixgbe: refactor link setup codeMallikarjuna R Chilakala
Link code cleanup: a number of redundant functions and MAC variables are cleaned up, with some functions being consolidated into a single-purpose code path. Removed following deprecated link functions and mac variables * ixgbe_setup_copper_link_speed_82598 * ixgbe_setup_mac_link_speed_multispeed_fiber * ixgbe_setup_mac_link_speed_82599 * mac.autoneg, mac.autoneg_succeeded, phy.autoneg_wait_to_complete Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-26ixgbe: Fix isues while reporting 8259x backplane link capabilitiesMallikarjuna R Chilakala
Fix ethtool get_settings logic to report 10G & 1G advertised and supported link modes in all 8259x 10G backplane connection types except for 82598EB BX network connection type. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/netxen/netxen_nic_main.c
2009-08-13ixgbe: fix issues setting rx-usecs with legacy interruptsDon Skidmore
Currently setting rx-usecs when the interface is in legacy interrupt mode it is not immediate. We were only setting EITR for each MSIx vector and since this count would be zero for legacy mode it wasn't set until after a reset. This patch corrects that by checking what mode we are in and then setting EITR accordingly. Signed-off-by: Don Skidmore <donald.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-3945.h drivers/net/wireless/iwlwifi/iwl-tx.c drivers/net/wireless/iwlwifi/iwl3945-base.c
2009-07-30ixgbe: Fix RSC completion delay causing Rx interrupts to stopPeter P Waskiewicz Jr
When a user disables interrupt throttling with ethtool on 82599 devices, the interrupt timer may not be re-enabled if hardware RSC is running. The RSC completions in hardware don't complete before the next ITR event tries to fire, so the ITR timer never gets re-armed. This patch increases the amount of time between interrupts when throttling is disabled (rx-usecs = 0) when the hardware RSC deature is enabled. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30ixgbe: Fix usage of second flags bitmap when using LRO/RSCPeter P Waskiewicz Jr
A second set of feature flag bits was added, and the hardware RSC engine flags were moved there. However, the code itself didn't make the move completely to use the new bitmap. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Acked-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-17ixgbe: Remove legacy descriptor supportPeter P Waskiewicz Jr
The ethtool offline test is the only consumer of the legacy descriptors. Update that path to only use advanced descriptors, and remove all support for legacy descriptors. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03ixgbe: Not allow 8259x unsupported wol options change from ethtoolMallikarjuna R Chilakala
Wake-on-lan is currently only supported by 82599 KX4 devices, in all other cases return a proper value from ixgbe_wol_exclusion function call. Otherwise from ethtool we will be able to change wol options of unsupported 8259x devices. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-30ixgbe: Fix device capabilities of 82599 single speed fiber NICs.Mallikarjuna R Chilakala
82599 single speed fiber modules only support 10G/Full. Return proper device capabilities while querrying the adapter and error while changing device advertisement/speed/duplex capabilities. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-07ixgbe: Enable Flow Director hashing in 82599Peter P Waskiewicz Jr
This patch enables Flow Director's ATR functionality to the main base driver for 82599. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Acked-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-07ixgbe: Add a second feature flags variable, move HW RSC capability therePeter P Waskiewicz Jr
This adds a second feature flag variable to use for future feature expansion. Add HW RSC to this new feature flags variable. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-07ixgbe: move v_idx into q_vector and use as index onlyAlexander Duyck
The v_idx value was being used as both a bitmask and an index. This change makes it so that the q_vector contains the index and allows for much of the code to be simplified since disabling a q_vector involves only clearing one bit in the interrupt bitmask. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-07ixgbe: ethtool support to change advertised link modes of 82599 adaptersMallikarjuna R Chilakala
Add ethtool support to change advertised link modes/autoneg settings of 82599 multispeed fiber adapters. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-07ixgbe: Fix 82599 adapter link flickering issuesMallikarjuna R Chilakala
Fix autoneg restart issues in flow control path which might create endless link flickering due to known timing issues with 82599 adapters. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakakla@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-07ixgbe: Add ethtool offline test supportPeter P Waskiewicz Jr
This patch adds support for the ethtool internal test engine. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17ixgbe: When in DCB mode with PFC enabled, show LFC is disabledPeter P Waskiewicz Jr
Ethtool should report that link flow control is disabled when in priority flow control mode. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17ixgbe: Allow link flow control in DCB mode for 82599 adaptersPeter P Waskiewicz Jr
82599 supports using either link flow control or priority flow control when in DCB mode. The dcbnl interface already supports sending down configurations through rtnetlink that can enable LFC when DCB is enabled, so the driver should take advantage of this. 82598 does not support using LFC when DCB is enabled, so explicitly disable it when we're in DCB mode. This means we always run in PFC mode when DCB is enabled. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17ixgbe: Add FCoE related statistics to 82599Yi Zou
This adds FCoE related statistics to 82599, including number Rx-ed and Tx-ed FCoE packets, number of Rx-ed and Tx-ed FCoE packets in dwords, number of bad Fiber Channel CRCs detected in FCoE packets, and number of FCoE packets dropped on the Rx side. Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06ixgbe: make q_vectors dynamic to reduce netdev sizeAlexander Duyck
Currently the q_vectors are being allocated statically inside of the adapter struct. This increases the overall size of the adapter struct when we can easily allocate the vectors dynamically. This patch changes that behavior so that the q_vectors are allocated dynamically and the napi structures are automatically allocated inside of the q_vectors as needed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-28ixgbe: enable HW RSC for 82599Alexander Duyck
This patch enables hardware receive side coalescing for 82599 hardware. 82599 can merge multiple frames from the same TCP/IP flow into a single structure that can span one ore more descriptors. The accumulated data is arranged similar to how jumbo frames are arranged with the exception that other packets can be interlaced inbetween. To overcome this issue a next pointer is included in the written back descriptor which indicates the next descriptor in the writeback sequence. This feature sets the NETIF_F_LRO flag and clearing it via the ethtool set flags operation will also disable hardware RSC. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-28ixgbe: enable hardware offload for sctpJesse Brandeburg
Inspired by: Vlad Yasevich <vladislav.yasevich@hp.com> This is the code to enable ixgbe for hardware offload support of CRC32c on both transmit and receive of SCTP traffic. only 82599 supports this offload, not 82598. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11ixgbe: only allow WOL for 82599 KX4 NICAlexander Duyck
All NICs were reporting WOL support when only the KX4 NIC is capable of supporting WOL. This patch adds a function to check for and exclude all non-WOL capable nics from enabling WOL in ethtool. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-02ixgbe: Fix potential memory leak/driver panic issue while setting up Tx & Rx ↵Mallikarjuna R Chilakala
ring parameters While setting up the ring parameters using ethtool the driver can panic or leak memory as ixgbe_open tries to setup tx & rx resources. The updated logic will use ixgbe_down/up after successful allocation of tx & rx resources Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-02ixgbe: fix ethtool -A|a behaviorDon Skidmore
We were basicly ignoring ethtool users request for FC autoneg and replying to queries with a "best guess". This patch enables the driver to store if we want to enable/disable autoneg FC and do the correct behavior. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-02ixgbe: Fix ethtool output with advertised mode.Don Skidmore
Ethtool tries to get advertised speed from phy.autoneg_advertised. However for copper media this wasn't happening until later do to an other fix which moved mac.ops.setup_link_speed placement in ixgbe_link_config(). This patch will display the default advertised speeds if it can't yet get this information from phy.autoneg_advertised. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-20ixgbe: Correctly report Wake On LAN for 82599 KX4 devicesPJ Waskiewicz
ethtool isn't reporting the support level of WoL for 82599 KX4 devices. While the device does support WoL, ethtool was never updated to properly report the level of support, nor will it allow ethtool to modify the type of packets to listen for. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14ixgbe: Fix interrupt configuration for 82599Jesse Brandeburg
The interrupt models using EITR have changed in 82599. The way the register is laid out, the change is transparent to some of the existing code. However, some of it isn't. This patch fixes all the cases where EITR handling is different than 82598. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01ixgbe: Add 82599 device id's, hook it up into the main driver.PJ Waskiewicz
With the hardware-specific code in place, add all supported device id's, along with base driver changes to enable 82599 devices. The devices being enabled are: 8086:10f7: 82599EB 10 Gigabit KX4 Network Connection 8086:10fb: 82599EB 10 Gigabit Network Connection The device 8086:10fb is a fully-pluggable SFP+ NIC. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01ixgbe: Add hardware specific initialization code for 82599 devicesPJ Waskiewicz
This patch adds the hardware initialization code specific to 82599. This is similar to the 82598 hardware initialization code. It also includes all changes to the existing hardware init code to support 82599. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-06ixgbe: Update flow control state machine in link setupPeter P Waskiewicz Jr
The flow control handling is overly complicated and difficult to maintain. This patch cleans up the flow control handling and makes it much more explicit. It also adds 1G flow control autonegotiation, for 1G copper links, 1G KX links, and 1G fiber links. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05ixgbe: Display EEPROM version in ethtool -i queriesPeter P Waskiewicz Jr
Currently ixgbe does not display the EEPROM version in ethtool -i, where other drivers do. The EEPROM version is located at offset 0x29. This patch adds support to display it. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01ixgbe: Update copyright dates, bump the driver version numberPeter P Waskiewicz Jr
New year, new copyright date ranges. Also bump the driver version number to reflect many of the recent changes. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01ixgbe: Add 82598 support for BX mezzanine devicesDon Skidmore
Add the device ID for BX devices using the 82598 MAC. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26ixgbe: add support KX/KX4 deviceDon Skidmore
And support for the KX/KX4 mezzanine card. Device id 0x10B6. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21ixgbe: Replace LRO with GROHerbert Xu
This patch makes ixgbe invoke the GRO hooks instead of LRO. As GRO has a compatible external interface to LRO this is a very straightforward replacement. As GRO uses the napi structure to track the held packets, I've modified the code paths involved to pass that along. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.Peter P Waskiewicz Jr
The adapter rings are kcalloc()'d, but in set_ringparam() in ixgbe_ethtool, we replace that memory from the vmalloc() pool. This can result in a NULL pointer reference when trying to modify the rings at a later time, or on device removal. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21ixgbe: fix the display of DCB control stats in ethtoolDon Skidmore
Priority flow contol statistics for Data Center Bridging (DCB) weren't included in ethtool. This patch adds them. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Eric W Multanen <eric.w.multanen@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 23:34:28 +0000