aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ne.c
AgeCommit message (Collapse)Author
2007-05-08ne: MIPS: Use platform_driver for ne on RBTX49XXAtsushi Nemoto
This patch lets RBTX49XX boards use generic platform_driver interface for the ne driver. * Use platform_device to pass ioaddr and irq to the ne driver. * Remove unnecessary ifdefs for RBTX49XX from the ne driver. * Make the ne driver selectable on these boards regardless of CONFIG_ISA Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-08ne: Add NEEDS_PORTLIST to control ISA auto-probeAtsushi Nemoto
Add NEEDS_PORTLIST cpp macro to control ISA auto-probe. (I'm not sure M32R needs auto-probe but it is current behavior) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-08ne: Misc fixes for platform driver.Atsushi Nemoto
Miscellaneous fixes to make ne platform driver work properly. * Make ioaddr 'unsigned long'. * Move a printk down to show dev->name assigned in register_netdev. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-08ne: Add platform_driverAtsushi Nemoto
Add a platform_driver interface to ne driver. (Existing legacy ports did not covered by this ne_driver for now) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-04[PATCH] trivial missing __init in drivers/net/*Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-09-13drivers/net: Trim trailing whitespaceJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11[PATCH] Section mismatch in drivers/net/ne.o during modpostRandy.Dunlap
On Sat, 10 Jun 2006 14:11:42 +0200 (MEST) Mikael Pettersson wrote: > While compiling 2.6.17-rc6 for a 486 with an NE2000 ISA ethernet card, I got: > > WARNING: drivers/net/ne.o - Section mismatch: reference to .init.data:isapnp_clone_list from .text between 'init_module' (at offset 0x158) and 'ne_block_input' > WARNING: drivers/net/ne.o - Section mismatch: reference to .init.data:isapnp_clone_list from .text between 'init_module' (at offset 0x176) and 'ne_block_input' > WARNING: drivers/net/ne.o - Section mismatch: reference to .init.data:isapnp_clone_list from .text between 'init_module' (at offset 0x183) and 'ne_block_input' > WARNING: drivers/net/ne.o - Section mismatch: reference to .init.data:isapnp_clone_list from .text between 'init_module' (at offset 0x1ea) and 'ne_block_input' > WARNING: drivers/net/ne.o - Section mismatch: reference to .init.data:isapnp_clone_list from .text between 'init_module' (at offset 0x251) and 'ne_block_input' > WARNING: drivers/net/ne.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x266) and 'ne_block_input' > WARNING: drivers/net/ne.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x29b) and 'ne_block_input' > > Not sure how serious this is; the driver seems to work fine later on. Doesn't look serious. init_module() is not __init, but it calls some __init functions and touches some __initdata. BTW, I would be happy to see some consistent results from modpost section checking. I don't see all of these warnings (I see only 1) when using gcc 3.3.6. What gcc version are you using? Does that matter? (not directed at anyone in particular) Patch below fixes it for me. Please test/report. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-08Fix RTL8019AS init for Toshiba RBTX49xx boardsSergei Shtylyov
Ensure that 8-bit mode is selected for the on-board Realtek RTL8019AS chip on Toshiba RBHMA4x00, get rid of the duplicate #ifdef's when setting ei_status.word16. The chip's datasheet says that the PSTOP register shouldn't exceed 0x60 in 8-bit mode -- ensure this too. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-04-20[PATCH] NEx000: fix RTL8019AS base address for RBTX4938Sergei Shtylyov
Correct the base address of the Realtek RTL8019AS chip on the Toshiba RBTX4938 board -- this should make the driver work at least when CONFIG_PCI is enabled. Signed-off-by: Yuri Shpilevsky <yshpilevsky@ru.mvista.com> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-01-17[PATCH] drivers/net/*: use time_after() and friendsMarcelo Feitoza Parisi
They deal with wrapping correctly and are nicer to read. Also make jiffies-holding variables unsigned long. Signed-off-by: Marcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-09[PATCH] fix a few "warning: 'cleanup_card' defined but not used"Denis Vlasenko
These warnings are emitted if non-modular network drivers are built. Fixes just move cleanup_card() definitions into #ifdef MODULE region. /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/wd.c:131: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/3c503.c:152: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/ne.c:216: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/hp.c:106: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/hp-plus.c:142: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/smc-ultra.c:172: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/e2100.c:144: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/es3210.c:159: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/lne390.c:149: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/lance.c:313: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/ac3200.c:127: warning: 'cleanup_card' defined but not used Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18[PATCH] ne: Support for RBHMA4500 eval board.Ralf Baechle
Support for Toshiba's RBHMA4500 eval board for the TX4938. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/ne.c | 15 +++++++++++++++ 1 files changed, 15 insertions(+) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-27[PATCH] turn many #if $undefined_string into #ifdef $undefined_stringOlaf Hering
turn many #if $undefined_string into #ifdef $undefined_string to fix some warnings after -Wno-def was added to global CFLAGS Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-12[netdrvr] Fix register_netdev() races in older ISA net drivers
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 18:26:51 +0000