aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/netxen
AgeCommit message (Collapse)Author
2007-07-11PCI: Change all drivers to use pci_device->revisionAuke Kok
Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-10netxen: deinline and sparse fixStephen Hemminger
Get rid of dubious casts to (void *) which causes a sparse warning. And move largeish function from inline to the one file that uses the code, the compiler can then decide to inline it. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08drivers/net: fix comparisons of unsigned < 0Bill Nottingham
Recent gcc versions emit warnings when unsigned variables are compared < 0 or >= 0. Signed-off-by: Bill Nottingham <notting@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02RESEND [PATCH 3/3] NetXen: Graceful teardown of interface and hardware upon ↵Dhananjay Phadke
module unload Resending patch 3/3 only. These changes allow driver close routine to be called during module unload, to clean-up buffers and other software resources, flush queues etc. Also, hardware is reset to pristine state. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Milan Bag <mbag@netxen.com> Signed-off-by: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02RESEND [PATCH 2/3] NetXen: Support per PCI-function interrupt mask registersdhananjay.phadke@gmail.com
This patch updates the various access routines to access different control and status settings present in different register locations. This will fix problems related to working of different ports in multi Port card. Signed-off by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off by: Milan Bag <mbag@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02RESEND [PATCH 1/3] NetXen: Fix issue of MSI not working correctlydhananjay.phadke@gmail.com
NetXen driver uses PCI function 0 to provide the functionality of MSI. The patch makes driver check the bus master bit for function 0 and enable it after the card initialization. Signed-off-by: Dhananjay Phadke<dhananjay@netxen.com> Signed-off-by: Milan Bag <mbag@netxen.com> Signed-off-by: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12NetXen: Fix link status messagesMithlesh Thukral
NetXen: Fix incorrect link status even with switch turned OFF. NetXen driver failed to accurately indicate when a link is up or down. This was encountered during failover testing, when the first port indicated that the link was up even when the 10G switch it was assigned to in the Bladecenter was turned off completely. Signed-off by: Wen Xiong <wenxiong@us.ibm.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09NetXen: Fix compile failure seen on PPC architectureMithlesh Thukral
NetXen: Add NETXEN prefixes to macros to clean them up. This is a cleanup patch which adds NETXEN prefix to some stand alone macro names. These posed compile errors when NetXen driver was backported to 2.6.9 on PPC architecture as macros like USER_START are defined in file arch/ppc64/mm/hash_utils.c Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off by: Wen Xiong <wenxiong@us.ibm.com> Acked-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09NetXen: Fix ping issue after reboot on Blades with 3.4.19 firmwareMithlesh Thukral
NetXen: Fix initialization and subsequent ping issue on 3.4.19 firmware This patch fixes the ping problem seen X/PBlades after the adapter's firmware was moved to 3.4.19. After configured interface up, ping failed. NetXen adapter couldn't accept ARP broadcast packet. Manual addition of MAC address in the ARP table, made ping work. NetXen adapter should finish initilization after system boot. But looks NetXen adapter didn't initilization correctly after system boot up. So have to re-load the firmware again in probe routine. Also re-initilization netxen_config_0 and netxen_config_1 registers. Signed-off by: Wen Xiong <wenxiong@us.ibm.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-03NetXen: Removal of extra free_irq callMithlesh Thukral
NetXen: Removal of redundant free_irq This patch removes a redundant free_irq() call from remove() routine. This will also eliminate a warning during unload of driver. Signed-by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-17NetXen: Fix NetXen driver ping on system-pMithlesh Thukral
NetXen: Fix for driver on System-p This patch will fix a ping issue on system-p Signed-off by: Milan Bag <mbag@netxen.com> Signed-off by: Adhiraj Joshi <adhiraj@netxen.com> Signed-by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11netxen_nic_main don't use deprecated irq flagsAndrew Morton
drivers/net/netxen/netxen_nic_main.c: In function 'netxen_nic_open': drivers/net/netxen/netxen_nic_main.c:738: warning: 'deprecated_irq_flag' is deprecated (declared at include/linux/interrupt.h:66) drivers/net/netxen/netxen_nic_main.c:738: warning: 'deprecated_irq_flag' is deprecated (declared at include/linux/interrupt.h:66) Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28NetXen: Fix for vmalloc issuesMithlesh Thukral
NetXen: Fix vmalloc errors on seen on some X86 high end machines. Signed-off by: Milan Bag <mbag@netxen.com> Acked-by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28NetXen: Fixes for Power PC architectureMithlesh Thukral
NetXen: Fix PPC architecture specific bugs Fixes some issues seen on Big endian machines. Signed-off by: Milan Bag <mbag@netxen.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28NetXen: Port swap feature for multi port cardsMithlesh Thukral
NetXen: Port Swap feature This patch will allow a port numbers on the card to be swapped in host driver. This feature is applicable to cards having more than 1 port. Signed-off by: Milan Bag <mbag@netxen.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28NetXen: Removal of redundant macrosMithlesh Thukral
NetXen: Remove 2 redundant macro definitions from header file. Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28NetXen: Multi PCI support for Quad cardsMithlesh Thukral
NetXen: Fix the multi PCI function for cards with more than 2 ports. This patch fixes the working of multi PCI capable driver on cards with more than 2 ports by adding the addresses for their rings and sizes. Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28NetXen: Removal of redundant argument passingMithlesh Thukral
NetXen: Removal of redundant function call parameters and bug fixes. This patch will remove the redundant paramters which were being passed to many functions since now adapter->portnum can be used. Signed-off-by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28NetXen: Use multiple PCI functionsMithlesh Thukral
NetXen: Make driver use multiple PCI functions. This patch will make NetXen driver work with multiple PCI functions. This will make the usage of memory resources as well as interrupts more independent among different functions which results in better throughput. This change has been done after the multiport support is added in firmware. Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-25[SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-04-25[TCP]: Introduce tcp_hdrlen() and tcp_optlen()Arnaldo Carvalho de Melo
The ip_hdrlen() buddy, created to reduce the number of skb->h.th-> uses and to avoid the longer, open coded equivalent. Ditched a no-op in bnx2 in the process. I wonder if we should have a BUG_ON(skb->h.th->doff < 5) in tcp_optlen()... Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_transport_offset()Arnaldo Carvalho de Melo
For the quite common 'skb->h.raw - skb->data' sequence. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce ip_hdr(), remove skb->nh.iphArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[IP]: Introduce ip_hdrlen()Arnaldo Carvalho de Melo
For the common sequence "skb->nh.iph->ihl * 4", removing a good number of open coded skb->nh.iph uses, now to go after the rest... Just out of curiosity, here are the idioms found to get the same result: skb->nh.iph->ihl << 2 skb->nh.iph->ihl<<2 skb->nh.iph->ihl * 4 skb->nh.iph->ihl*4 (skb->nh.iph)->ihl * sizeof(u32) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_network_offset()Arnaldo Carvalho de Melo
For the quite common 'skb->nh.raw - skb->data' sequence. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo
One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-29NetXen: Fix hardware access for ppc architecture.Linsys Contractor Adhiraj Joshi
NetXen: Fix for hardware access on big endian machine. Signed-off-by: Adhiraj Joshi <adhiraj@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-15NetXen: Fix softlockup seen during hardware accessLinsys Contractor Mithlesh Thukral
NetXen: This will fix a softlock seen on some machines. The reason was too much time was spent waiting for hardware access to go through. Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-15NetXen: Bug fix for Jumbo frames on XG cardLinsys Contractor Mithlesh Thukral
NetXen: Set the MTU for the right port depending upon the port number for XG cards. Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-09netxen: fix warningsRalf Baechle
CC [M] drivers/net/netxen/netxen_nic_hw.o drivers/net/netxen/netxen_nic_hw.c: In function 'netxen_nic_hw_resources': drivers/net/netxen/netxen_nic_hw.c:231: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'dma_addr_t' drivers/net/netxen/netxen_nic_hw.c:250: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'dma_addr_t' u64 is unsigned long so the cast to u64 will result in a warning on the printf arguments for 64-bit builds. So cast to unsigned long long instead. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02NetXen: Fix second rmmod failure observed on PowerPC machines.Linsys Contractor Mithlesh Thukral
Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02NetXen: Updates, removal of unsupported features and minor bug fixes.Linsys Contractor Mithlesh Thukral
Signed-off-by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27netxen: do_rom_fast_write error handlingStephen Hemminger
Compiler warning spots real error! The function do_rom_fast_read called in do_rom_fast_write can fail and leave data1 unset. This causes a compile warning. The correct thing is to propagate the error out. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27NetXen: Driver ifconfig fixAmit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27NetXen: Driver unload fixesAmit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17NetXen: Fix to get the driver working after sparse changesAmit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17Merge branch 'master' into upstreamJeff Garzik
2007-02-14[PATCH] Scheduled removal of SA_xxx interrupt flags fixupsThomas Gleixner
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Roland Dreier <rolandd@cisco.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Dave Airlie <airlied@linux.ie> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09NetXen: Updates for ethtool supportAmit S. Kale
NetXen: Updates for ethtool support. Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09NetXen: Fixes for ppc architecture.Amit S. Kale
NetXen: Fixes for ppc architecture. Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06NetXen: Added ethtool support for user level tools.Amit S. Kale
NetXen: Added ethtool support for user level firmware management utilities. Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06NetXen: Firmware crb init changes.Amit S. Kale
NetXen: firmware crb init changes. Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-31netxen patchesAl Viro
Have fun. >From 24f4a1a77431575a9cdfaae25adda85842099f70 Mon Sep 17 00:00:00 2001 From: Al Viro <viro@zeniv.linux.org.uk> Date: Mon, 1 Jan 2007 15:22:56 -0500 Subject: [PATCH] netxen trivial annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-23NetXen: Use pci_register_driver() instead of pci_module_init() in init_moduleAmit S. Kale
This will use pci_register_driver() instead of pci_module_init(). Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-23NetXen: Firmware check modificationsAmit S. Kale
This patch is to make the driver work with multiple minor firmware versions Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-29Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (42 commits) r8169: extraneous Cmd{Tx/Rx}Enb write forcedeth: modified comment header NetXen: Reducing ring sizes for IOMMU issue. NetXen: Fix for PPC machines. NetXen: work queue fixes. NetXen: Link status message correction for quad port cards. NetXen: Multiple adapter fix. NetXen: Using correct CHECKSUM flag. NetXen: driver reload fix for newer firmware. NetXen: Adding new device ids. PHY probe not working properly for ibm_emac (PPC4xx) ep93xx: some minor cleanups to the ep93xx eth driver sky2: phy power down needs PCI config write enabled sky2: power management/MSI workaround sky2: dual port NAPI problem via-velocity uses INET interfaces e1000: Do not truncate TSO TCP header with 82544 workaround myri10ge: handle failures in suspend and resume myri10ge: no need to save MSI and PCIe state in the driver myri10ge: make msi configurable at runtime through sysfs ...
2006-12-26NetXen: Reducing ring sizes for IOMMU issue.Amit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic.h | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26NetXen: Fix for PPC machines.Amit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic.h | 2 +- netxen_nic_init.c | 12 ++++++------ netxen_nic_main.c | 4 ++-- 3 files changed, 9 insertions(+), 9 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26NetXen: work queue fixes.Amit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic.h | 3 +-- netxen_nic_init.c | 2 +- netxen_nic_main.c | 15 +++++++-------- 3 files changed, 9 insertions(+), 11 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26NetXen: Link status message correction for quad port cards.Amit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic_isr.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletion(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>