aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/netxen
AgeCommit message (Collapse)Author
2008-12-26drivers/net/netxen: fix sparse warnings: use NULL pointer instead of plain ↵Hannes Eder
integer Fix this sparse warnings: drivers/net/netxen/netxen_nic_hw.c:1462:18: warning: Using plain integer as NULL pointer drivers/net/netxen/netxen_nic_hw.c:1536:18: warning: Using plain integer as NULL pointer Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22net: Remove unused netdev arg from some NAPI interfaces.Neil Horman
When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21netxen: convert to net_device_opsStephen Hemminger
Convert driver to new net_device_ops. Compile tested only. Had to do some refactoring on multicast_list. Fix ethtool restart to propogate error code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12netdevice: safe convert to netdev_priv() #part-2Wang Chen
We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03drivers/net: Kill now superfluous ->last_rx stores.David S. Miller
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27net: convert print_mac to %pMJohannes Berg
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-24netxen: enable msi-x for quad-gig boardsDhananjay Phadke
NX3031 firmware now supports MSI-X interrupts on Quad GbE boards. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24drivers/net: replace __FUNCTION__ with __func__Harvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24netxen: add pci idsDhananjay Phadke
Define old and new pci vendor and device ids. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: bnx2x: Accessing un-mapped page ath9k: Fix TX control flag use for no ACK and RTS/CTS ath9k: Fix TX status reporting iwlwifi: fix STATUS_EXIT_PENDING is not set on pci_remove iwlwifi: call apm stop on exit iwlwifi: fix Tx cmd memory allocation failure handling iwlwifi: fix rx_chain computation iwlwifi: fix station mimo power save values iwlwifi: remove false rxon if rx chain changes iwlwifi: fix hidden ssid discovery in passive channels iwlwifi: W/A for the TSF correction in IBSS netxen: Remove workaround for chipset quirk pcnet-cs, axnet_cs: add new IDs, remove dup ID with less info ixgbe: initialize interrupt throttle rate net/usb/pegasus: avoid hundreds of diagnostics tipc: Don't use structure names which easily globally conflict.
2008-09-03netxen: Remove workaround for chipset quirkDhananjay Phadke
Remove chipset-specific quirk workaround; the workaround caused unrecoverable DMA lockups when the driver was loaded following a PXE boot. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Michael Brown <mbrown@fensystems.co.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-23removed unused #include <linux/version.h>'sAdrian Bunk
This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-14netxen: update driver versionDhananjay Phadke
Raise driver version to 4.0.11. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-14netxen: cleanup interrupt codeDhananjay Phadke
Mark interrupt scheme in very old firmware incompatible. Interrupt mask and status registers are per pci function / port. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-14netxen: fix dma watchdogDhananjay Phadke
NX3031 does not require driver to kill dma watchdog. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-14netxen: force link update across ifdown/ifupDhananjay Phadke
Re-read link status in dev open(). Schedule link watchdog only if dev is up. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-14netxen: fix rxbuf leak across driver reloadDhananjay Phadke
Free up rx ring during driver unload or open() failure. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-14netxen: fix mac addr setupDhananjay Phadke
For NX3031 mac addr should be read from firmware. mac addr in flash is still valid, but can be overridden by firmware if running in virtualization environment. For old revisions, mac addr is retrieved directly from flash. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07drivers/net/netxen/netxen_nic_hw.c: fix printk warningsAndrew Morton
drivers/net/netxen/netxen_nic_hw.c: In function 'netxen_nic_pci_mem_read_direct': drivers/net/netxen/netxen_nic_hw.c:1414: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'u64' drivers/net/netxen/netxen_nic_hw.c: In function 'netxen_nic_pci_mem_write_direct': drivers/net/netxen/netxen_nic_hw.c:1487: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'u64' You don't know what type was used for u64 hence they cannot be printed without casting. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07netxen: fix promisc mode, mtu settingDhananjay Phadke
For NX3031, multicast filtering, promisc mode, and max frame size setting is handled by firmware, driver needs to send request to enable/disable it. For old chip revisions / firmware, driver still sets it directly. Added function pointer to set mtu according to chip revision. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07netxen: fix cmd ring initDhananjay Phadke
Initialize producer and consumer indices during netdev open(), only for old firmware/chip. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07netxen: fix legacy interruptsDhananjay Phadke
Fix legacy interrupt mode for NX3031 chips, read pci interrupt state in hardware to guard against spurious interrupt. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07netxen: add new board typesDhananjay Phadke
Add couple of new board configurations based on NX3031 chip. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07netxen: fix link status, link speedDhananjay Phadke
For NX3031, the phy is managed by firmware, so driver should avoid setting any phy registers. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22netxen: Needs to include linux/vmalloc.hDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22netxen: update driver versionDhananjay Phadke
Change driver version to 4.0.0. Netxen firmwares as old as v3.4.216 are supported. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22netxen: enable tso6, intr coalescing.Dhananjay Phadke
Enable tso6 and ipv6 checksum, interrupt coalescing for NX3031. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22netxen: cut-through rx changesDhananjay Phadke
NX3031 supports cut-through operation where ingress packets are directly dma'ed into host buffers to reduce latency. This requires larger dma buffers (2kb) and different alignemnt. The buffer posting logic is changed a bit. The free rx buffers are maintained in linked list, since the received reference handles can be out of order. However rx descriptors are still posted sequentially, indexed by producer. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22netxen: mtu, mac, link status changesDhananjay Phadke
MAC addr, multicast filters, mtu are set through firmware commands in firmware v4.0.0+ because of virtualization of physical ports. Link status is also read from registers allocated by firmware for each virtual port. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22netxen: add netxen_nic_ctx.cDhananjay Phadke
Contains rx and tx ring context management and certain firmware commands for netxen firmware v4.0.0+. This patch gathers all HW context management code into netxen_nic_ctx.c. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22netxen: remove netxen_nic_isr.cDhananjay Phadke
It had only couple of functions which are moved to main.c Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22netxen: pci probe and firmware init changesDhananjay Phadke
Add initialization code in pci probe for new chip and retain compatibility with old revisions. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22netxen: add 2MB PCI memory supportDhananjay Phadke
New revision of netxen chip has 2MB PCI memory. Older chips had 128MB addressable PCI memory. To retain compatibility, this patch adds function pointers based on pci bar0 size. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22netxen: add defs for new chip/boardsDhananjay Phadke
Add macros for new chip revision and board configurations. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22netxen: hw multicast filteringDhananjay Phadke
Enable multicast address filtering capabilities in the hardware. Upto 16 multicast addresses can be programmed for each physical port. Support "allmulti" mode, if enabled. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22netxen: cleanup unused variables/functionsDhananjay Phadke
o Reduce access to global arrays in data path. o Remove duplicate/unused variables, unecessary alignment constraints. o Use correct pci_dev instead of fallback device for consistent allocations. o Disable ethtool set_eeprom functionality for now, it was only used for flashing firmware. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-27[netdrvr] netxen: fix netxen_pci_tbl[] breakageAl Viro
PCI_DEVICE_CLASS sets .device and .vendor to PCI_ANY_DEV, which overrides the effect of preceding PCI_DEVICE() and makes all elements of netxen_pci_tbl[] identical. Introduced in the commit dcd56fdbaeae1008044687b973c4a3e852e8a726. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: download firmware in pci probeDhananjay Phadke
Downloading firmware in pci probe allows recovery in case of firmware failure by reloading the driver. Also reduced delays in firmware load. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: cleanup debug messagesDhananjay Phadke
o Remove unnecessary debug prints and functions. o Explicitly specify pci class (0x020000) to avoid enabling management function. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: remove global physical_port arrayDhananjay Phadke
Store physical port number in netxen_adapter structure. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: fix portnum for hp mezz cardsDhananjay Phadke
This fixes a the issue where logical port number is set incorrectly for HP blade mezz cards. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (48 commits) net: Fix wrong interpretation of some copy_to_user() results. xfrm: alg_key_len & alg_icv_len should be unsigned [netdrvr] tehuti: move ioctl perm check closer to function start ipv6: Fix typo in net/ipv6/Kconfig via-velocity: fix vlan receipt tg3: sparse cleanup forcedeth: realtek phy crossover detection ibm_newemac: Increase MDIO timeouts gianfar: Fix skb allocation strategy netxen: reduce stack usage of netxen_nic_flash_print smc911x: test after postfix decrement fails in smc911x_{reset,drop_pkt} net drivers: fix platform driver hotplug/coldplug forcedeth: new backoff implementation ehea: make things static phylib: Add support for board-level PHY fixups [netdrvr] atlx: code movement: move atl1 parameter parsing atlx: remove flash vendor parameter korina: misc cleanup korina: fix misplaced return statement WAN: Fix confusing insmod error code for C101 too. ...
2008-04-25netxen: reduce stack usage of netxen_nic_flash_printHarvey Harrison
Don't need to keep a struct netxen_new_user_info on the stack when we only are interested in printing the serial_num. Change to only reading the serial_num. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-18net: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox
None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-16#if 0 netxen_nic_link_ok()Adrian Bunk
This patch #if 0's the no longer used netxen_nic_link_ok(). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16make netxen_workq staticAdrian Bunk
netxen_workq can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-03-25netxen, phy/marvell, skge: minor checkpatch fixesJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-03-25netxen: fix rx dropped statsDhananjay Phadke
Don't count rx dropped packets based on return value of netif_receive_skb(), which is misleading. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Tested-by: Vernon Mauery <mauery@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25netxen: remove low level tx lockDhananjay Phadke
o eliminate tx lock in netxen adapter struct, instead pound on netdev tx lock appropriately. o remove old "concurrent transmit" code that unnecessarily drops and reacquires tx lock in hard_xmit_frame(), this is already serialized the netdev xmit lock. o reduce scope of tx lock in tx cleanup. tx cleanup operates on different section of the ring than transmitting cpus and is guarded by producer and consumer indices. This fixes a race caused by rx softirq preemption on realtime kernels. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Tested-by: Vernon Mauery <mauery@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25netxen: napi and irq cleanupDhananjay Phadke
o separate and simpler irq handler for msi interrupts, avoids few checks than legacy mode. o avoid redudant tx_has_work() and rx_has_work() checks in interrupt and napi, which can uncork irq based on racy (lockless) access to tx and rx ring indices. If we get interrupt, there's sufficient reason to schedule napi. o replenish rx ring more often, remove self-imposed threshold rcv_free that prevents posting rx desc to card. This improves performance in low memory. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Tested-by: Vernon Mauery <mauery@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 00:25:27 +0000