aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/niu.c
AgeCommit message (Collapse)Author
2008-02-28[NIU]: Add Support for Sun ATCA Blade Server.Matheos Worku
Ports 0 and 1 of the NIU device are connected to extended fabric through SERDES. Ports 2 and 3 are connected using RGMII Fiber mode. [ Coding style cleanups... -DaveM ] Signed-off-by: Matheos Worku <matheos.worku@sun.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-20[NIU]: More BMAC alt MAC address fixes.Matheos Worku
From: Matheos Worku <Matheos.Worku@Sun.COM> 1) niu_enable_alt_mac() needs to be adjusted so that the mask is computed properly for the BMAC case. 2) BMAC has 6 alt MAC addresses available, not 7. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18[NIU]: Bump driver version and release date.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18[NIU]: Fix BMAC alternate MAC address indexing.Matheos Worku
BMAC port alternate MAC address index needs to start at 1. Index 0 is used for the main MAC address. Signed-off-by: Matheos Worku <matheos.worku@sun.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NIU]: Use print_macJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-17[NIU]: Fix 1G PHY link state handling.David S. Miller
The code in link_status_1g() computes the active speed and duplex but does not update the link config state with those values. As a result the link speed is not reported correctly and the XIF is not reprogrammed properly on link up events. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-10[NIU]: Support for Marvell PHYMirko Lindner
From: Mirko Lindner <mlindner@marvell.com> This patch makes necessary changes in the Neptune driver to support the new Marvell PHY. It also adds support for the LED blinking on Neptune cards with Marvell PHY. All registers are using defines in the niu.h header file as is already done for the BCM8704 registers. [ Coding style, etc. cleanups -DaveM ] Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08[NIU]: Update driver version and release date.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08[NIU]: Fix potentially stuck TCP socket send queues.David S. Miller
It is possible for the TX ring to have packets sit in it for unbounded amounts of time. The only way to defer TX interrupts in the chip is to periodically set "mark" bits, when processing of a TX descriptor with the mark bit set is complete it triggers the interrupt for the TX queue's LDG. A consequence of this kind of scheme is that if packet flow suddenly stops, the remaining TX packets will just sit there. If this happens, since those packets could be charged to TCP socket send queues, such sockets could get stuck. The simplest solution is to divorce the socket ownership of the packet once the device takes the SKB, by using skb_orphan() in niu_start_xmit(). In hindsight, it would have been much nicer if the chip provided two interrupt sources for TX (like basically every other ethernet chip does). Namely, keep the "mark" bit, but also signal the LDG when the TX queue becomes completely empty. That way there is no need to have a deadlock breaker like this. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08[NIU]: Missing ->last_rx update.David S. Miller
Noticed by Paul Lodridge. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08[NIU]: Fix slowpath interrupt handling.Matheos Worku
niu_slowpath_interrupt() expects values to be setup in lp->{v0,v1,v2} but they aren't. That's only done by niu_schedule_napi() which is done later in the interrupt path. If niu_rx_error() returns zero, and v0 is clear, hit the RX_DMA_CTL_STATE register with a RX_DMA_CTL_STAT_MEX. Only emit verbose RX error logs if a fatal channel or port error is signalled. Other cases will be recorded into statistics by niu_log_rxchan_errors(). Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-07[NIU]: Fix link LED handling.Mirko Lindner
The LED in the current driver will not be controlled correctly. During a link change the carrier of the link is not available and the LED will never turn on. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-22[NIU]: Cleanup PAGE_SIZE checks a bitOlof Johansson
I get the following warning from a powerpc allyesconfig of current mainline: drivers/net/niu.c: In function 'niu_size_rbr': drivers/net/niu.c:3113: warning: large integer implicitly truncated to unsigned type PAGE_SIZE in this case is 64KB, so I don't quite get why gcc can't tell that the line in question will never be reached. I suggest the following instead, but I can unfortunately not do anything but build test it. Also, the driver does some other checks to make sure that PAGE_SIZE is a power of two (BUILD_BUG_ON() in niu_init()), doesn't seem like that could ever be untrue? Or are there really archs with non-power-of-two PAGE_SIZE? Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-15[NIU]: getting rid of __ucmpdi2 in niu.oAl Viro
By the time we get to that switch by PHY type, we have 8bit value. No need to keep it in u64 when u8 would do. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-15[NIU]: Fix write past end of array in niu_pci_probe_sprom().David S. Miller
Noticed by Coverity checker and reported by Adrian Bunk. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NIU]: Add Sun Neptune ethernet driver.David S. Miller
With cleanup suggestions and bugs spotted by Stephen Hemminger, Ingo Oeser, Matheos Worku, and Oliver Hartkopp. Signed-off-by: David S. Miller <davem@davemloft.net>