aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/skge.c
AgeCommit message (Collapse)Author
2005-07-31[PATCH] skge: version 0.8Stephen Hemminger
Increase driver version to 0.8 Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31[PATCH] skge: led toggle cleanupStephen Hemminger
Cleanup code that is used to toggle LED's. Since we get called from ethtool, can use that thread rather than setting up a timer. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31[PATCH] skge: ignore phy interrupts during negotiationStephen Hemminger
During autonegotiation set PHY interrupt mask to ignore bogus speed change interrupts. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31[PATCH] skge: fifo control register access fixStephen Hemminger
The code to clear fifo errors was incorrect and sending garbage to the external phy. Removed the no longer used inline's funcs. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31[PATCH] skge: whitespace fixesStephen Hemminger
Minor whitespace cleanups. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31[PATCH] skge: support yukon lite rev 4Stephen Hemminger
The check for Yukon lite changes was restricting itself to rev A3. It turns out that these changes are also true on A4 and later. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31[PATCH] skge: phy lock deadlockStephen Hemminger
Cleanup the phy_lock deadlock because of relocking in the nway_reset path. Reported by Francois Romieu. Also, don't need to do irqsave/restore for blink, just excluding bh is good enough. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31[PATCH] skge: disable tranmitter on shutdownStephen Hemminger
Here is a fix for a typo, thanks Eliot Dresselhaus. Since transmitter not active when device is down, it wasn't really noticed. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31[PATCH] skge: remove SK-9EE supportStephen Hemminger
The SK-9E boards use the Marvell Yukon2 chipset which is not supported by the skge driver. Thanks to Ralph Roesler for noticing. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31[PATCH] skge: silence mac data parity messagesStephen Hemminger
Using Genesis board, I get harmless error reports. Rather than console error, turn it into a error counter. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-07[PATCH] pm: more u32 vs. pm_message_t fixesPavel Machek
Few more u32 vs. pm_message_t fixes. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27[PATCH] skge: version and copyright.Stephen Hemminger
Bump version and copyright year. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27[PATCH] skge: Rx buffer optimizationStephen Hemminger
Optimize the receive buffer management code to replenish the buffers immediately (like tg3). Signed-off-by: Stephen Hemmminger <shemminger@osdl.org>
2005-06-27[PATCH] skge: handle Tx/Rx arbiter timeoutStephen Hemminger
Need to handle receive and transmit packet arbiter timeouts. Transmit arbiter timeouts happens when Gigabit sends to 100Mbit port on same switch and pause occurs. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27[PATCH] skge: add PHY related debug messagesStephen Hemminger
Cleanup messages (for debug) about PHY interrrupts, because when user can't get driver working that is often the problem. Use a consistent way of enabling interrupts by port. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27[PATCH] skge: make Genesis/Broadcom code workStephen Hemminger
Rewrite the code for handling the Broadcom PHY to something that works. Remove link polling because Broadcom and Yukon don't need it. When I wrote initial code, didn't have a genesis chipset based board to test, so it was a non-working guess. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27[PATCH] skge: cleanup ethtool mode supportStephen Hemminger
Unify mapping of supported modes based on hardware. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27[PATCH] skge: remove XM phy (untested code)Stephen Hemminger
Remove support for the non-Broadcom genesis based boards. The code is untested, and probably won't work as is. The newer boards are all Yukon based, and only old Genesis board I can find uses Broadcom. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27[PATCH] skge: remove Yukon2 related special casesStephen Hemminger
Remove the bits and pieces added relating to Yukon II chipset. The Yukon 2 will be in a separate driver. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27[PATCH] skge: remove unused declarationsStephen Hemminger
Get rid of definitions for chip versions and PHY chips that this driver does not support. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27[PATCH] skge: eliminate Yukon2 hooksStephen Hemminger
The Yukon chips don't support TSO, and Yukon2 will be a separate driver. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27[PATCH] skge: replace chip_rev() accessorStephen Hemminger
Replace inline accessor functions for chip revision and number of ports with simple structure members. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27[PATCH] skge: use pci_read_config_wordStephen Hemminger
Rather than accessing PCI config space through MMIO space, use the standard PCI functions. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27[PATCH] skge: function amd macro name changeStephen Hemminger
The inlines and macro's needed some cleanup's and fixes: * change name of macro SKGEMAC_REG to SK_REG to better reflect usage and fix comments * ditto for SK_GEXM_REG -> SK_XMAC_REG and SKGEGMA_REG -> SK_GMA_REG * change skge_gm_ to just gm_ since it is just a local function and long names look ugly. * change skge_xm_ to just xm_ * fix xm_write32 to write as two u16's with correct byte order * fix xm_outaddr to correctly use offset Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27[PATCH] skge: PCI_DEVICE() macroStephen Hemminger
Use PCI_DEVICE() macro. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27[PATCH] skge: whietspace cleanupStephen Hemminger
Cleanup whitespace around if() and switch() and end of lines Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-05-15[PATCH] skge 64bit portabilityAl Viro
ptrdiff_t is %td, not %d Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
2005-05-15[PATCH] skge missing includeAl Viro
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
2005-05-12[netdrvr] new driver skge, for SysKonnect cardsStephen Hemminger