aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/tun.c
AgeCommit message (Collapse)Author
2009-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits) netxen: update copyright netxen: fix tx timeout recovery netxen: fix file firmware leak netxen: improve pci memory access netxen: change firmware write size tg3: Fix return ring size breakage netxen: build fix for INET=n cdc-phonet: autoconfigure Phonet address Phonet: back-end for autoconfigured addresses Phonet: fix netlink address dump error handling ipv6: Add IFA_F_DADFAILED flag net: Add DEVTYPE support for Ethernet based devices mv643xx_eth.c: remove unused txq_set_wrr() ucc_geth: Fix hangs after switching from full to half duplex ucc_geth: Rearrange some code to avoid forward declarations phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs drivers/net/phy: introduce missing kfree drivers/net/wan: introduce missing kfree net: force bridge module(s) to be GPL Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded ... Fixed up trivial conflicts: - arch/x86/include/asm/socket.h converted to <asm-generic/socket.h> in the x86 tree. The generic header has the same new #define's, so that works out fine. - drivers/net/tun.c fix conflict between 89f56d1e9 ("tun: reuse struct sock fields") that switched over to using 'tun->socket.sk' instead of the redundantly available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks to the TUN driver") which added a new 'tun->sk' use. Noted in 'next' by Stephen Rothwell.
2009-09-01tun: reuse struct sock fieldsMichael S. Tsirkin
As tun always has an embeedded struct sock, use sk and sk_receive_queue fields instead of duplicating them in tun_struct. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01netdev: convert pseudo drivers to netdev_tx_tStephen Hemminger
These are all drivers that don't touch real hardware. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01lsm: Add hooks to the TUN driverPaul Moore
The TUN driver lacks any LSM hooks which makes it difficult for LSM modules, such as SELinux, to enforce access controls on network traffic generated by TUN users; this is particularly problematic for virtualization apps such as QEMU and KVM. This patch adds three new LSM hooks designed to control the creation and attachment of TUN devices, the hooks are: * security_tun_dev_create() Provides access control for the creation of new TUN devices * security_tun_dev_post_create() Provides the ability to create the necessary socket LSM state for newly created TUN devices * security_tun_dev_attach() Provides access control for attaching to existing, persistent TUN devices and the ability to update the TUN device's socket LSM state as necessary Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: Eric Paris <eparis@parisplace.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Morris <jmorris@namei.org>
2009-08-12Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: arch/microblaze/include/asm/socket.h
2009-08-09tun: Extend RTNL lock coverage over whole ioctlHerbert Xu
As it is, parts of the ioctl runs under the RTNL and parts of it do not. The unlocked section is still protected by the BKL, but there can be subtle races. For example, Eric Biederman and Paul Moore observed that if two threads tried to create two tun devices on the same file descriptor, then unexpected results may occur. As there isn't anything in the ioctl that is expected to sleep indefinitely, we can prevent this from occurring by extending the RTNL lock coverage. This also allows to get rid of the BKL. Finally, I changed tun_get_iff to take a tun device in order to avoid calling tun_put which would dead-lock as it also tries to take the RTNL lock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-17tun: Allow tap device to send/receive UFO packets.Sridhar Samudrala
- Allow setting UFO on tap device and handle UFO packets. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> --------------------------------------------------------- Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-09Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-07-07tun: Remove a dead line of codePaul Moore
Remove an unnecessary assignment. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06tun/tap: Fix crashes if open() /dev/net/tun and then poll() it.Mariusz Kozlowski
Fix NULL pointer dereference in tun_chr_pool() introduced by commit 33dccbb050bbe35b88ca8cf1228dcf3e4d4b3554 ("tun: Limit amount of queued packets per device") and triggered by this code: int fd; struct pollfd pfd; fd = open("/dev/net/tun", O_RDWR); pfd.fd = fd; pfd.events = POLLIN | POLLOUT; poll(&pfd, 1, 0); Reported-by: Eugene Kapun <abacabadabacaba@gmail.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functionsPatrick McHardy
This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05tun: Fix device unregister raceHerbert Xu
It is currently possible for an asynchronous device unregister to cause the same tun device to be unregistered twice. This is because the unregister in tun_chr_close only checks whether __tun_get(tfile) != NULL. This however has nothing to do with whether the device has already been unregistered. All it tells you is whether __tun_detach has been called. This patch fixes this by using the most obvious thing to test whether the device has been unregistered. It also moves __tun_detach outside of rtnl_unlock since nothing that it does requires that lock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-15Driver Core: misc: add nodename support for misc devices.Kay Sievers
This adds support for misc devices to report their requested nodename to userspace. It also updates a number of misc drivers to provide the needed subdirectory and device name to be used for them. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-08tun: Fix unregister raceEric W. Biederman
It is possible for tun_chr_close to race with dellink on the a tun device. In which case if __tun_get runs before dellink but dellink runs before tun_chr_close calls unregister_netdevice we will attempt to unregister the netdevice after it is already gone. The two cases are already serialized on the rtnl_lock, so I have gone for the cheap simple fix of moving rtnl_lock to cover __tun_get in tun_chr_close. Eliminating the possibility of the tun device being unregistered between __tun_get and unregister_netdevice in tun_chr_close. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Tested-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-08tun: Fix copy/paste error in tun_get_userSridhar Samudrala
Use the right structure while incrementing the offset in tun_get_user. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-08tun: Optimise handling of bogus gso->hdr_lenHerbert Xu
As all current versions of virtio_net generate a value for the header length that's too small, we should optimise this so that we don't copy it twice. This can be done by ensuring that it is at least as large as the place where we'll write the checksum. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03tun: Only wake up writersHerbert Xu
When I added socket accounting to tun I inadvertently introduced spurious wake-up events that kills qemu performance. The problem occurs when qemu polls on the tun fd for read, and then transmits packets. For each packet transmitted, we will wake up qemu even if it only cares about read events. Now this affects all sockets, but it is only a new problem for tun. So this patch tries to fix it for tun first and we can then look at the problem in general. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-09tun: add tun_flags, owner, group attributes in sysfsDavid Woodhouse
This patch adds three attribute files in /sys/class/net/$dev/ for tun devices; allowing userspace to obtain the information which TUNGETIFF offers, and more, but without having to attach to the device in question (which may not be possible if it's in use). It also fixes a bug which has been present in the TUNGETIFF ioctl since its inception, where it would never set IFF_TUN or IFF_TAP according to the device type. (Look carefully at the code which I remove from tun_get_iff() and how the new tun_flags() helper is subtly different). Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-27tun: add IFF_TUN_EXCL flag to avoid opening a persistent device.David Woodhouse
When creating a certain types of VPN, NetworkManager will first attempt to find an available tun device by iterating through 'vpn%d' until it finds one that isn't already busy. Then it'll set that to be persistent and owned by the otherwise unprivileged user that the VPN dæmon itself runs as. There's a race condition here -- during the period where the vpn%d device is created and we're waiting for the VPN dæmon to actually connect and use it, if we try to create _another_ device we could end up re-using the same one -- because trying to open it again doesn't get -EBUSY as it would while it's _actually_ busy. So solve this, we add an IFF_TUN_EXCL flag which causes tun_set_iff() to fail if it would be opening an existing persistent tundevice -- so that we can make sure we're getting an entirely _new_ device. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tun: fix tun_chr_aio_write so that aio worksMichael S. Tsirkin
aio_write gets const struct iovec * but tun_chr_aio_write casts this to struct iovec * and modifies the iovec. As a result, attempts to use io_submit to send packets to a tun device fail with weird errors such as EINVAL. Since tun is the only user of skb_copy_datagram_from_iovec, we can fix this simply by changing the later so that it does not touch the iovec passed to it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tun: fix tun_chr_aio_read so that aio worksMichael S. Tsirkin
aio_read gets const struct iovec * but tun_chr_aio_read casts this to struct iovec * and modifies the iovec. As a result, attempts to use io_submit to get packets from a tun device fail with weird errors such as EINVAL. Fix by using the new skb_copy_datagram_const_iovec. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-20tun: Fix sk_sleep races when attaching/detachingHerbert Xu
As the sk_sleep wait queue actually lives in tfile, which may be detached from the tun device, bad things will happen when we use sk_sleep after detaching. Since the tun device is the persistent data structure here (when requested by the user), it makes much more sense to have the wait queue live there. There is no reason to have it in tfile at all since the only time we can wait is if we have a tun attached. In fact we already have a wait queue in tun_struct, so we might as well use it. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Tested-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-20tun: Only free a netdev when all tun descriptors are closedHerbert Xu
The commit c70f182940f988448f3c12a209d18b1edc276e33 ("tun: Fix races between tun_net_close and free_netdev") fixed a race where an asynchronous deletion of a tun device can hose a poll(2) on a tun fd attached to that device. However, this came at the cost of moving the tun wait queue into the tun file data structure. The problem with this is that it imposes restrictions on when and where the tun device can access the wait queue since the tun file may change at any time due to detaching and reattaching. In particular, now that we need to use the wait queue on the receive path it becomes difficult to properly synchronise this with the detachment of the tun device. This patch solves the original race in a different way. Since the race is only because the underlying memory gets freed, we can prevent it simply by ensuring that we don't do that until all tun descriptors ever attached to the device (even if they have since be detached because they may still be sitting in poll) have been closed. This is done by using reference counting the attached tun file descriptors. The refcount in tun->sk has been reappropriated for this purpose since it was already being used for that, albeit from the opposite angle. Note that we no longer zero tfile->tun since tun_get will return NULL anyway after the refcount on tfile hits zero. Instead it represents whether this device has ever been attached to a device. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-14tun: Fix crash with non-GSO usersHerbert Xu
When I made the tun driver use non-linear packets as the preferred option, it broke non-GSO users because they would end up allocating a completely non-linear packet, which triggers a crash when we call eth_type_trans. This patch reverts non-GSO users to using linear packets and adds a check to ensure that GSO users can't cause crashes in the same way. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-14tun: Fix merge errorHerbert Xu
When forward-porting the tun accounting patch I managed to break the send path compltely by dropping the tun_get call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/gianfar.c
2009-02-08tun: Fix unicast filter overflowAlex Williamson
Tap devices can make use of a small MAC filter set via the TUNSETTXFILTER ioctl. The filter has a set of exact matches plus a hash for imperfect filtering of additional multicast addresses. The current code is unbalanced, adding unicast addresses to the multicast hash, but only checking the hash against multicast addresses. This results in the filter dropping unicast addresses that overflow the exact filter. The fix is simply to disable the filter by leaving count set to zero if we find non-multicast addresses after the exact match table is filled. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05tun: Limit amount of queued packets per deviceHerbert Xu
Unlike a normal socket path, the tuntap device send path does not have any accounting. This means that the user-space sender may be able to pin down arbitrary amounts of kernel memory by continuing to send data to an end-point that is congested. Even when this isn't an issue because of limited queueing at most end points, this can also be a problem because its only response to congestion is packet loss. That is, when those local queues at the end-point fills up, the tuntap device will start wasting system time because it will continue to send data there which simply gets dropped straight away. Of course one could argue that everybody should do congestion control end-to-end, unfortunately there are people in this world still hooked on UDP, and they don't appear to be going away anywhere fast. In fact, we've always helped them by performing accounting in our UDP code, the sole purpose of which is to provide congestion feedback other than through packet loss. This patch attempts to apply the same bandaid to the tuntap device. It creates a pseudo-socket object which is used to account our packets just as a normal socket does for UDP. Of course things are a little complex because we're actually reinjecting traffic back into the stack rather than out of the stack. The stack complexities however should have been resolved by preceding patches. So this one can simply start using skb_set_owner_w. For now the accounting is essentially disabled by default for backwards compatibility. In particular, we set the cap to INT_MAX. This is so that existing applications don't get confused by the sudden arrival EAGAIN errors. In future we may wish (or be forced to) do this by default. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-02tun: Check supplemental groups in TUN/TAP driver.Michael Tokarev
Michael Tokarev wrote: [] > 2, and this is the main one: How about supplementary groups? > > Here I have a valid usage case: a group of testers running various > versions of windows using KVM (kernel virtual machine), 1 at a time, > to test some software. kvm is set up to use bridge with a tap device > (there should be a way to connect to the machine). Anyone on that group > has to be able to start/stop the virtual machines. > > My first attempt - pretty obvious when I saw -g option of tunctl - is > to add group ownership for the tun device and add a supplementary group > to each user (their primary group should be different). But that fails, > since kernel only checks for egid, not any other group ids. > > What's the reasoning to not allow supplementary groups and to only check > for egid? Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01net: replace uses of __constant_{endian}Harvey Harrison
Base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21tun: Implement ip link del tunXXXEric W. Biederman
This greatly simplifies testing to verify I have fixed the problems with a tun device disappearing when the tun file descriptor is still held open. Further it allows removal network namespace operations for the tun driver. Reducing the network namespace handling in the driver to the minimum. i.e. When we are creating a tun device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21tun: There is no longer any need to deny changing network namespacesEric W. Biederman
With the awkward case between free_netdev and dev_chr_close fixed there is no longer any need to limit tun and tap devices to the network namespace they were created in. So remove the NETIF_F_NETNS_LOCAL flag on the network device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21tun: Fix races between tun_net_close and free_netdev.Eric W. Biederman
The tun code does not cope gracefully if the network device goes away before the tun file descriptor is closed. It looks like we can trigger this with rmmod, and moving tun devices between network namespaces will allow this to be triggered when network namespaces exit. To fix this I introduce an intermediate data structure tun_file which holds a count of users and a pointer to the struct tun_struct. tun_get increments that reference count if it is greater than 0. tun_put decrements that reference count and detaches from the network device if the count is 0. While we have a file attached to the network device I hold a reference to the network device keeping it from going away completely. When a network device is unregistered I decrement the count of the attached tun_file and if that was the last user I detach the tun_file, and all processes on read_wait are woken up to ensure they do not sleep indefinitely. As some of those sleeps happen with the count on the tun device elevated waking up the read waiters ensures that tun_file will be detached in a timely manner. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21tun: Move read_wait into tun_fileEric W. Biederman
The poll interface requires that the waitqueue exist while the struct file is open. In the rare case when a tun device disappears before the tun file closes we fail to provide this property, so move read_wait. This is safe now that tun_net_xmit is atomic with tun_detach. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21tun: Make tun_net_xmit atomic wrt tun_attach && tun_detachEric W. Biederman
Currently this small race allows for a packet to be received when we detach from an tun device and still be enqueued. Not especially important but not what the code is trying to do. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21tun: Grab the netns in open.Eric W. Biederman
Grabbing namespaces in open, and putting them in close always seems to be the cleanest approach with the fewest surprises. So now that we have tun_file so we have somepleace to put the network namespace, let's grab the network namespace on file open and put on file close. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21tun: Introduce tun_fileEric W. Biederman
Currently the tun code suffers from only having a single word of data that exists for the entire life of the tun file descriptor. This results in peculiar holding of references to the network namespace as well as races between free_netdevice and tun_chr_close. Fix this by introducing tun_file which will hold the per file state. For the moment it still holds just a single word so the differences are all logic changes with no changes in semantics. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21tun: Use POLLERR not EBADF in tun_chr_pollEric W. Biederman
EBADF is meaningless in the context of a poll mask so use POLLERR instead. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21tun: Fix races in tun_set_iffEric W. Biederman
It is possible for two different tasks with access to the same file descriptor to call tun_set_iff on it at the same time and race to attach to a tap device. Prevent this by placing all of the logic to attach to a file descriptor in one function and testing the file descriptor to be certain it is not already attached to another tun device. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21tun: Remove unnecessary tun_get_by_nameEric W. Biederman
Currently the tun driver keeps a private list of tun devices for what appears to be a small gain in performance when reconnecting a file descriptor to an existing tun or tap device. So simplify the code by removing it. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04tun: Eliminate sparse signedness warningGerrit Renker
register_pernet_gen_device() expects 'int*', found via sparse. CHECK drivers/net/tun.c drivers/net/tun.c:1245:36: warning: incorrect type in argument 1 (different signedness) drivers/net/tun.c:1245:36: expected int *id drivers/net/tun.c:1245:36: got unsigned int static [toplevel] *<noident> Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29tun: Fix SIOCSIFHWADDR error.Kusanagi Kouichi
Set proper operations. Signed-off-by: Kusanagi Kouichi <slash@ma.neweb.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits) net: Allow dependancies of FDDI & Tokenring to be modular. igb: Fix build warning when DCA is disabled. net: Fix warning fallout from recent NAPI interface changes. gro: Fix potential use after free sfc: If AN is enabled, always read speed/duplex from the AN advertising bits sfc: When disabling the NIC, close the device rather than unregistering it sfc: SFT9001: Add cable diagnostics sfc: Add support for multiple PHY self-tests sfc: Merge top-level functions for self-tests sfc: Clean up PHY mode management in loopback self-test sfc: Fix unreliable link detection in some loopback modes sfc: Generate unique names for per-NIC workqueues 802.3ad: use standard ethhdr instead of ad_header 802.3ad: generalize out mac address initializer 802.3ad: initialize ports LACPDU from const initializer 802.3ad: remove typedef around ad_system 802.3ad: turn ports is_individual into a bool 802.3ad: turn ports is_enabled into a bool 802.3ad: make ntt bool ixgbe: Fix set_ringparam in ixgbe to use the same memory pools. ... Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due to the conversion to %pI (in this networking merge) and the addition of doing IPv6 addresses (from the earlier merge of CIFS).
2008-11-20netdev: add more functions to netdevice opsStephen Hemminger
This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19tun: convert to net_device_opsStephen Hemminger
Convert the TUN/TAP tunnel driver to net_device_ops. Split the ops in two, and retain compatability. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-14CRED: Wrap current->cred and a few other accessorsDavid Howells
Wrap current->cred and a few other accessors to hide their actual implementation. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14CRED: Wrap task credential accesses in the network device driversDavid Howells
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: netdev@vger.kernel.org Signed-off-by: James Morris <jmorris@namei.org>
2008-11-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath5k/base.c net/8021q/vlan_core.c
2008-11-03drivers/net: Kill now superfluous ->last_rx stores.David S. Miller
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-01saner FASYNC handling on file closeAl Viro
As it is, all instances of ->release() for files that have ->fasync() need to remember to evict file from fasync lists; forgetting that creates a hole and we actually have a bunch that *does* forget. So let's keep our lives simple - let __fput() check FASYNC in file->f_flags and call ->fasync() there if it's been set. And lose that crap in ->release() instances - leaving it there is still valid, but we don't have to bother anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>