aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/via-velocity.c
AgeCommit message (Collapse)Author
2008-07-11via-velocity: add velocity_set_rxbufsize helperFrancois Romieu
It removes a dependancy from velocity_init_rd_ring to dev->mtu. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-11via-velocity: move residual free rx descriptors count register updateFrancois Romieu
Updates of the RBRDU have two different meanings depending on their context: 1. the receiving process has not started - the value which is written into the RBRDU register is supposed to be the free rx descriptors count (rounded to a multiple of 4) 2. the receiving process is running - the value increments the count above (sic) The update is currently issued deep inside the rx replenish chain (see velocity_give_many_rx_descs). Let's propagate enough information to the caller so that the rx replenish functions do not depend on hardware any more. It is needed to perform the Rx/Tx buffers housekeeping when MTU changes. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-11via-velocity: lean and clean velocity_init_ringsFrancois Romieu
- PCI consistent areas need no memset - use dev_err instead of plain printk - avoid a few casts Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-11via-velocity: remove the bounce buffersFrancois Romieu
Executive summary: the bounce buffers are in my way - they use something like a 64 * 1500 bytes area of PCI consistent area - they are not resized when the MTU changes - they are used - to hand-pad undersized packets. skb_pad anyone ? - to linearize fragmented skbs whose fragment count goes beyond the 7 fragments hardware limit in order to claim scatter-gather support Actually the SG code is commented out and I wonder if it could not be implemented (ab-)using the large send feature of the chipset since the latter should support some multi-descriptor packet transmitting. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Fixed-by: Séguier Régis <rseguier@e-teleport.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22via-velocity: use memmoveStephen Hemminger
Use memmove to handle overlapping copy of data. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22via-velocity: use netdev_alloc_skbStephen Hemminger
Use netdev_alloc_skb for rx buffer allocation. This sets skb->dev and can be overriden for NUMA machines. Change code to return new buffer rather than call by reference. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25via-velocity: fix vlan receiptFrancois Romieu
- vlans were using a single CAM register (see mac_set_vlan_cam) - setting the address filtering registers for vlans is not needed when there is no vlan The non-tagged interface is filtered out as soon as a tagged (!= 0) interface is created. Its traffic appears again when an zero-tagged interface is created. Tested on Via Epia SN (VT6130 chipset) with several vlans whose tag was above or beyond 255. Signed-off-by: Séguier Régis <rseguier@e-teleport.net> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-03-26[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS.YOSHIFUJI Hideaki
Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-02-28[NETNS]: Disable inetaddr notifiers in namespaces other than initial.Denis V. Lunev
ip_fib_init is kept enabled. It is already namespace-aware. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28[IPV4]: Remove ifa != NULL check.Denis V. Lunev
This is a callback registered to inet address notifier chain. The check is useless as: - ifa is always != NULL - similar checks are abscent in all other notifiers. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-09via-velocity: section fixAndrew Morton
From: Andrew Morton <akpm@linux-foundation.org> gcc-3.4.4 on powerpc: drivers/net/via-velocity.c:443: error: chip_info_table causes a section type conflict on this one I had to remove the __devinitdata too. Don't know why. Cc: Jeff Garzik <jeff@garzik.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03big-endian support for via-velocityAl Viro
* kill bitfields * annotate * add missing conversions * fix a couple of brainos in zerocopy stuff (fortunately, it's ifdef'ed out) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-01via-velocity: don't oops on MTU change (resend)Stephen Hemminger
The VIA veloicty driver needs the following to allow changing MTU when down. The buffer size needs to be computed when device is brought up, not when device is initialized. This also fixes a bug where the buffer size was computed differently on change_mtu versus initial setting. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-14[VIA_VELOCITY]: Don't oops on MTU change.Stephen Hemminger
Simple mtu change when device is down. Fix http://bugzilla.kernel.org/show_bug.cgi?id=9382. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-19Fix misspellings of "system", "controller", "interrupt" and "necessary".Robert P. J. Day
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-10via-velocity: more cleanupStephen Hemminger
Per Al's suggestion, get rid of the stupid stuff: Remove cam_type switch, And deinline things that aren't important for speed. And make big macro and inline. And remove some dead/unused code. And use const char * for chip name. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10via-velocity: use standard VLAN interface (resend)Stephen Hemminger
The via-velocity is using a non-standard VLAN interface configured via module parameters (yuck). Replace with the standard acceleration interface. It solves a number of problems with being able to handle multiple vlans, and dynamically reconfigure. This is compile tested only, don't have this board. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle
It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10drivers/net/via-velocity.c: mostly kmalloc + memset conversion to kcallocMariusz Kozlowski
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> drivers/net/via-velocity.c | 88263 -> 88120 (-143 bytes) drivers/net/via-velocity.o | 254264 -> 253828 (-436 bytes) drivers/net/via-velocity.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-31in-string typos of "error"Eddy L O Jansson
One patch for two trivial typos of 'error' with three R's, appearing in message strings. There's a bunch more of the same in comments, not dealt with here. Signed-off-by: Eddy L O Jansson <eddy@klopper.net> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-11PCI: Change all drivers to use pci_device->revisionAuke Kok
Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09typo in via-velocity.cDave Jones
http://bugzilla.kernel.org/show_bug.cgi?id=8160 Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-25[SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-04-25[SK_BUFF]: Introduce ip_hdr(), remove skb->nh.iphArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo
One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-26via-velocity uses INET interfacesRandy Dunlap
via-velocity doesn't build when CONFIG_INET=n: drivers/built-in.o: In function `velocity_unregister_notifier': via-velocity.c:(.text+0xe9b46): undefined reference to `unregister_inetaddr_notifier' drivers/built-in.o: In function `velocity_init_module': via-velocity.c:(.init.text+0xa027): undefined reference to `register_inetaddr_notifier' I wanted to make this change in drivers/net/Kconfig, but this isn't legal kconfig language: config VIA_VELOCITY tristate "VIA Velocity support" depends on NET_PCI && PCI + depends on INET if PM select CRC32 select CRC_CCITT select MII so fix it in via-velocity.c instead. Builds with all 4 combinations of CONFIG_NET & CONFIG_PM. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-08[PATCH] crc32: replace bitreverse by bitrev32Akinobu Mita
This patch replaces bitreverse() by bitrev32. The only users of bitreverse() are crc32 itself and via-velocity. Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-24Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (217 commits) net/ieee80211: fix more crypto-related build breakage [PATCH] Spidernet: add ethtool -S (show statistics) [NET] GT96100: Delete bitrotting ethernet driver [PATCH] mv643xx_eth: restrict to 32-bit PPC_MULTIPLATFORM [PATCH] Cirrus Logic ep93xx ethernet driver r8169: the MMIO region of the 8167 stands behin BAR#1 e1000, ixgb: Remove pointless wrappers [PATCH] Remove powerpc specific parts of 3c509 driver [PATCH] s2io: Switch to pci_get_device [PATCH] gt96100: move to pci_get_device API [PATCH] ehea: bugfix for register access functions [PATCH] e1000 disable device on PCI error drivers/net/phy/fixed: #if 0 some incomplete code drivers/net: const-ify ethtool_ops declarations [PATCH] ethtool: allow const ethtool_ops [PATCH] sky2: big endian [PATCH] sky2: fiber support [PATCH] sky2: tx pause bug fix drivers/net: Trim trailing whitespace [PATCH] ehea: IBM eHEA Ethernet Device Driver ... Manually resolved conflicts in drivers/net/ixgb/ixgb_main.c and drivers/net/sky2.c related to CHECKSUM_HW/CHECKSUM_PARTIAL changes by commit 84fa7933a33f806bbbaae6775e87459b1ec584c0 that just happened to be next to unrelated changes in this update.
2006-09-22[NET]: Replace CHECKSUM_HW by CHECKSUM_PARTIAL/CHECKSUM_COMPLETEPatrick McHardy
Replace CHECKSUM_HW by CHECKSUM_PARTIAL (for outgoing packets, whose checksum still needs to be completed) and CHECKSUM_COMPLETE (for incoming packets, device supplied full checksum). Patch originally from Herbert Xu, updated by myself for 2.6.18-rc3. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-13drivers/net: const-ify ethtool_ops declarationsJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13drivers/net: Trim trailing whitespaceJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-12Merge branch 'tmp' into upstreamJeff Garzik
2006-09-12[PATCH] Remove more unnecessary driver printk'sAndy Gospodarek
As I promised last week, here is the first pass at removing all unnecessary printk's that exist in network device drivers currently in promiscuous mode. The duplicate messages are not needed so they have been removed. Some of these drivers are quite old and might not need an update, but I did them all anyway. I am currently auditing the remaining conditional printk's and will send out a patch for those soon. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19drivers/net: Remove deprecated use of pci_module_init()Jeff Garzik
From: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-20via-velocity: fix speed and link status reported by ethtoolJay Cliburn
The via-velocity driver reports incorrect speed and link detected status as viewed by ethtool (and probably other tools). This patch fixes those incorrect reports and prettifies a long line. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-05[netdrvr] use dev_xxx() printk helpers, rather than dev_printk(KERN_xxx, ...Jeff Garzik
Suggested by Jiri Slaby. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[netdrvr] via-velocity: remove io_size struct member, it is invariantJeff Garzik
Replace io_size struct members with VELOCITY_IO_SIZE constant. Also, constify chip_info_table[]. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[netdrvr] via-velocity: misc. cleanupsJeff Garzik
- const-ify pci_device_id table - clean up pci_device_id table with PCI_DEVICE() - don't store internal pointer in pci_device_id table, use pci_device_id::driver_data as an integer index - use dev_printk() for messages where eth%d prefix is unavailable - formatting fixes Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[netdrvr] via-velocity: use netdev_priv() where appropriateJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-02[PATCH] irq-flags: drivers/net: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-23via-velocity: the link is not correctly detected when the device startsFrancois Romieu
The patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=6711 Signed-off-by: Roy Marples <uberlord@gentoo.org> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-06-17[NET]: Clean up skb_linearizeHerbert Xu
The linearisation operation doesn't need to be super-optimised. So we can replace __skb_linearize with __pskb_pull_tail which does the same thing but is more general. Also, most users of skb_linearize end up testing whether the skb is linear or not so it helps to make skb_linearize do just that. Some callers of skb_linearize also use it to copy cloned data, so it's useful to have a new function skb_linearize_cow to copy the data if it's either non-linear or cloned. Last but not least, I've removed the gfp argument since nobody uses it anymore. If it's ever needed we can easily add it back. Misc bugs fixed by this patch: * via-velocity error handling (also, no SG => no frags) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27via-velocity: fix memory corruption when changing the mtuFrancois Romieu
velocity_rx_refill() only replenishes the descriptor entries which belong to the CPU. It works great in the Rx path but the driver must ensure that all the descriptors are freed before velocity_rx_refill() is used in velocity_change_mtu(). The patch resets the Rx descriptors in velocity_free_rd_ring(). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-01-12[PATCH] via-velocity: use NETIF_F_IP_CSUM (hardware only support IPv4)John W. Linville
At least some versions of the via-velocity hardware only support checksumming IPv4 frames in hardware. However, the driver is currently setting the NETIF_F_HW_CSUM flag, which indicates support for more than just IPv4. This results in errors when trying to use IPv6 over via-velocity hardware. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-09[PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reasonOlaf Hering
This patch removes almost all inclusions of linux/version.h. The 3 #defines are unused in most of the touched files. A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is unfortunatly in linux/version.h. There are also lots of #ifdef for long obsolete kernels, this was not touched. In a few places, the linux/version.h include was move to where the LINUX_VERSION_CODE was used. quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'` search pattern: /UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28drivers/net: Remove pointless checks for NULL prior to calling kfree()Jesper Juhl
2005-06-28[NET]: Remove gratuitous use of skb->tail in network drivers.David S. Miller
Many drivers use skb->tail unnecessarily. In these situations, the code roughly looks like: dev = dev_alloc_skb(...); [optional] skb_reserve(skb, ...); ... skb->tail ... But even if the skb_reserve() happens, skb->data equals skb->tail. So it doesn't make any sense to use anything other than skb->data in these cases. Another case was the s2io.c driver directly mucking with the skb->data and skb->tail pointers. It really just wanted to do an skb_reserve(), so that's what the code was changed to do instead. Another reason I'm making this change as it allows some SKB cleanups I have planned simpler to merge. In those cleanups, skb->head, skb->tail, and skb->end pointers are removed, and replaced with skb->head_room and skb->tail_room integers. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@pobox.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!