aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/Kconfig
AgeCommit message (Collapse)Author
2009-10-30wireless: airo_cs needs WEXT_SPYRandy Dunlap
airo_cs uses spy interfaces so it needs to select WEXT_SPY. ERROR: "iw_handler_set_thrspy" [drivers/net/wireless/airo.ko] undefined! ERROR: "wireless_spy_update" [drivers/net/wireless/airo.ko] undefined! ERROR: "iw_handler_get_spy" [drivers/net/wireless/airo.ko] undefined! ERROR: "iw_handler_get_thrspy" [drivers/net/wireless/airo.ko] undefined! ERROR: "iw_handler_set_spy" [drivers/net/wireless/airo.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30wireless: remove WLAN_80211 and WLAN_PRE80211 from KconfigJohn W. Linville
With the WLAN_PRE80211 drivers moved to drivers/staging, this distinction becomes unnecessary. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30netwave: move driver to stagingJohn W. Linville
Move the netwave driver to drivers/staging. This is another pre-802.11 driver that has seen virtually no non-API-fixup activity in years, and for which no active hardware is likely to still exist. This driver represents unnecessary ongoing maintenance for no clear benefit. This patch brought to you by the "hacking" session at the 2009 Kernel Summit in Tokyo, Japan... Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30wavelan: move driver to stagingJohn W. Linville
Move the wavelan driver to drivers/staging. This is another pre-802.11 driver that has seen virtually no non-API-fixup activity in years, and for which no active hardware is likely to still exist. This driver represents unnecessary ongoing maintenance for no clear benefit. This patch brought to you by the "hacking" session at the 2009 Kernel Summit in Tokyo, Japan... Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30arlan: move driver to stagingJohn W. Linville
Move the arlan driver to drivers/staging. This is another pre-802.11 driver that has seen virtually no non-API-fixup activity in years, and for which no active hardware is likely to still exist. This driver represents unnecessary ongoing maintenance for no clear benefit. This patch brought to you by the "hacking" session at the 2009 Kernel Summit in Tokyo, Japan... Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30strip: move driver to stagingJohn W. Linville
Move the strip ("Starmode Radio IP") driver to drivers/staging. For several years this driver has only seen API "bombing-run" changes, and few people ever had the hardware. This driver represents unnecessary ongoing maintenance for no clear benefit. This patch brought to you by the "hacking" session at the 2009 Kernel Summit in Tokyo, Japan... Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-09wireless: make wireless drivers select coreJohannes Berg
It is somewhat non-sensical to allow selecting wireless drivers without showing wireless core code options, and since the wext refactoring this has made it possible to generate configurations that will not build. Avoid this and make wireless drivers select the wireless options. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07libertas: separate libertas' Kconfig in it's own fileHolger Schurig
Also sorts all "source" lines in the wireless/Kconfig. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07wext: refactorJohannes Berg
Refactor wext to * split out iwpriv handling * split out iwspy handling * split out procfs support * allow cfg80211 to have wireless extensions compat code w/o CONFIG_WIRELESS_EXT After this, drivers need to - select WIRELESS_EXT - for wext support - select WEXT_PRIV - for iwpriv support - select WEXT_SPY - for iwspy support except cfg80211 -- which gets new hooks in wext-core.c and can then get wext handlers without CONFIG_WIRELESS_EXT. Wireless extensions procfs support is auto-selected based on PROC_FS and anything that requires the wext core (i.e. WIRELESS_EXT or CFG80211_WEXT). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-01Kconfig: STRIP: Remove stale bits of STRIP help textRalf Baechle
Remove references to dead web site mosquitonet.Stanford.EDU. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14wireless: default CONFIG_WLAN to yLuis R. Rodriguez
When this was added no defaults were set and it seems this implies n. Default this to y. Reported-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09wireless: mark prism54 as deprecated and mark for removalLuis R. Rodriguez
The preferred module is p54pci which also supports FullMAC PCI / Cardbus devices. We schedule removal for 2.6.34. Reason to remove this is no one really is testing prism54 anymore, and while it works p54pci provides support for the same hardware. It should be noted I have been told some FullMAC devices may not have worked with the SoftMAC driver but to date we have yet to recieve a single bug report regarding this. If there are users out there please let us know! Cc: aquilaver@yahoo.com Cc: linux-kernel@vger.kernel.org Cc: Dan Williams <dcbw@redhat.com> Cc: Kai Engert <kengert@redhat.com> Cc: Jean Tourrilhes <jt@hpl.hp.com> Cc: Tim de Waal<tim.dewaal@yahoo.com> Cc: Roy Marples <uberlord@gentoo.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Christian Lamparter <chunkeey@web.de> Cc: Björn Steinbrink <B.Steinbrink@gmx.de> Cc: Tim Gardner <tim.gardner@canonical.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-02wireless: update top level wireless driver entryLuis R. Rodriguez
Change it to a menuconfig to give it some documentation, to refer users to our wireless wiki for extra resources and documentation. It seems our wiki is still obscure to some. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01rndis_wlan: remove 'select WIRELESS_EXT' in KconfigJussi Kivilinna
Since rndis_wlan is now converted to cfg80211, WIRELESS_EXT isn't required anymore. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04wireless: use menuconfig for WLAN_PRE80211 and WLAN_80211Luis R. Rodriguez
This should make it very clear which are pre-802.11 or not Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24rtl8187: updating Kconfig with info of branded devicesHin-Tak Leung
Adding more detailed info about Asus motherboards and Ralink devices. Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24wireless: fix supported cards for rtl8187Marcin Slusarz
Different revisions of WUSB54GC-EU use different chipsets - v2 uses rtl8187, but v3 uses Ralink RT3070. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Przemyslaw Kulczycki <azrael@autocom.pl> Cc: John W. Linville <linville@tuxdriver.com> Cc: Linux wireless <linux-wireless@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c
2009-06-12trivial: Kconfig: .ko is normally not included in module namesPavel Machek
.ko is normally not included in Kconfig help, make it consistent. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-10net/libertas: remove GPIO-CS handling in SPI interface codeSebastian Andrzej Siewior
This removes the dependency on GPIO framework and lets the SPI host driver handle the chip select. The SPI host driver is required to keep the CS active for the entire message unless cs_change says otherwise. This patch collects the two/three single SPI transfers into a message. Also the delay in read path in case use_dummy_writes are not used is moved into the SPI host driver. Tested-by: Mike Rapoport <mike@compulab.co.il> Tested-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03cfg80211: fix Kconfig for users of cfg80211Johannes Berg
* iwm doesn't depend on cfg80211 or wireless extensions * rndis wlan selects cfg80211 - needs to depend * mac80211 selects cfg80211 - needs to depend Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/forcedeth.c
2009-05-29rtl8187: add USB ID for Linksys WUSB54GC-EU v2 USB wifi dongleJohn W. Linville
http://bugzilla.kernel.org/show_bug.cgi?id=13383 Reported-by: Przemyslaw Kulczycki <azrael@autocom.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwmc3200wifi: Add new Intel Wireless Multicomm 802.11 driverZhu Yi
This driver supports Intel's full MAC wireless multicomm 802.11 hardware. Although the hardware is a 802.11agn device, we currently only support 802.11ag, in managed and ad-hoc mode (no AP mode for now). Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-06wl12xx: add driverKalle Valo
wl12xx is a driver for TI wl1251 802.11 chipset designed for embedded devices, supporting both SDIO and SPI busses. Currently the driver supports only SPI. Adding support 1253 (the 5 GHz version) should be relatively easy. More information here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?contentId=4711&navigationId=12494&templateId=6123 (Collapsed original sequence of pre-merge patches into single commit for initial merge. -- JWL) Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rndis_wlan: select CFG80211 in KconfigJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rtl8187: Implement TX/RX blink for LEDLarry Finger
The following patch implements some control over the LED on RTL8187B and RTL8187L devices. Triggers are registered for TX and RX. Whenever the trigger event occurs, the LED is turned off for 1/20 second, then turned back on. Note: For those RTL8187X devices that are built into the computer and have a LED that is expected to be controlled with a radio switch, this patch will not operate that LED. That will take a separate patch to be prepared later. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22libertas: add support for Marvell SD8688 chipBing Zhao
libertas: add support for Marvell SD8688 chip Use RxPD->pkt_ptr to locate eth803 header in the packet received since SD8688/v10 firmware allows a gap between RxPD and eth803 header. Set SDIO block size to 256 for CMD53. The maximum block size for SD8688 WLAN function is set to 512 in TPLFE_MAX_BLK_SIZE. But using 512 as block size results upto 2K bytes data (4 blocks) being transferred and causes buffer overflow in firmware. Both changes above are backward compatible with earlier firmware versions for SD8385/SD8686. The SDIO_DEVICE_IDs for SD8688 chip are added in include/linux/mmc/sdio_ids.h Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22atheros: put atheros wireless drivers into ath/Luis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22atheros: introduce ath module containing common ath5k/ath9k/ar9170 codeBob Copeland
This change creates a new module, ath.ko, which includes code that can be shared between ath5k, ath9k and ar9170. For now, extract most of the ath9k regulatory code so it can also be used in ath5k. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ar9170: update Makefile, Kconfig and MAINTAINERSChristian Lamparter
This patch update all necessary Makefile and Kconfig files. Now you can then enable ar9170 in the kernel configuration under: Device Drivers ---> [*] Network device support ---> Wireless LAN ---> [*] Wireless LAN (IEEE 802.11) <M> Atheros AR9170 support <M> Atheros AR9170 USB support Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16mwl8k: Marvell TOPDOG wireless driverLennert Buytenhek
Add a driver for Marvell 88w8xxx TOPDOG PCI/PCIe wireless parts. This initial version supports the 88w8687 802.11b/g PCIe part on channels 1-11, and only STA mode is currently implemented. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27at76c50x-usb: add driverKalle Valo
This is a driver for usb devices based on at76c50x chipset. This is a mac80211 port of the original at76_usb driver. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29Move orinoco Kconfig entries into drivers/net/wireless/orinoco/KconfigAndrey Borzenkov
Since driver now lives in separate subdirectory, move Kconfig entries in own file so they can be tweaked indepndently. It complements "orinoco: Move sources to a subdirectory". Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29libertas: if_spi, driver for libertas GSPI devicesColin McCabe
Add initial support for libertas devices using a GSPI interface. This has been tested with the 8686. GSPI is intended to be used on embedded systems. Board-specific parameters are required (see libertas_spi.h). Thanks to everyone who took a look at the earlier versions of the patch. Signed-off-by: Colin McCabe <colin@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12Wireless: Fix Kconfig fact errorErik Ekman
Raytheon cards use 2.4 GHz, not 2.4 MHz. See http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Linux.Wireless.drivers.html#Raylink Signed-off-by: Erik Ekman <erik@kryo.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26orinoco: Provide option to avoid unnecessary fw cachingDavid Kilroy
Make firmware caching on startup optional, and make it default. When the option is not selected and PM_SLEEP is configured, then cache firmware in the suspend pm_notifier. This configuration saves about 64k RAM in normal use, but can lead to a situation where the driver is configured to use a different firmware. Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25rtl8187: Remove module warning and dependence on CONFIG_EXPERIMENTALLarry Finger
After considerable testing, the initial fears that the driver might damage some flavors of RTL8187B hardware seem to be groundless. Accordingly, the logged warning is removed. In addition, Kconfig is changed to remove the dependence on EXPERIMENTAL. Signed-off-by: Larry Finger <Larry.Finger@lwfinger> Acked-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21ipw2x00: relocate ipw2100/ipw2200 to common directoryJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21ipw2100, ipw2200: select LIB80211John W. Linville
Otherwise some configs can result in missing print_ssid... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: consolidate on a single escape_essid implementationJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Add MIC on TX and check on RXDavid Kilroy
Use the MIC algorithm from the crypto subsystem. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Invoke firmware download in main driverDavid Kilroy
Firmware download is enabled for Agere in orinoco_cs. Symbol firmware download has been moved out of spectrum_cs into orinoco_cs. Firmware download is not enabled for Intersil. Symbol based firmware is restricted to only download on spectrum_cs based cards. The firmware names are hardcoded for each firmware type. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22libertas_tf: config and makefileLuis Carlos Cobo
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07ath9k: Add new Atheros IEEE 802.11n driverLuis R. Rodriguez
This adds the new mac80211 11n ath9k Atheros driver. Only STA support is currently enabled and tested. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Jack Howarth <howarth@bromo.msbb.uc.edu> Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01Rtl8187 PATCH add usb ID for asus wireless linkAndrea Merello
This patch from Davide Cavalca adds a usb ID for an rtl8187L device. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-18Revert "remove the strip driver"David S. Miller
This reverts commit 94d9842403f770239a656586442454b7a8f2df29. Alan says it's not appropriate to remove this driver, Adrian Bunk also agrees with this revert. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08rtl8187: updating Kconfig to support RTL8187BHin-Tak Leung
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-26remove the strip driverAdrian Bunk
The latest trace about usage of this driver I found was an (unanswered) request for help by a user trying to get it working reliably five years ago with kernel 2.4 . And even if it was still working the use cases of this driver (requiring both the hardware and someone providing this kind of wireless network) have become practically nonexisting. This patch therefore removes the strip driver. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14mac80211_hwsim: 802.11 radio simulator for mac80211Jouni Malinen
mac80211_hwsim is a Linux kernel module that can be used to simulate arbitrary number of IEEE 802.11 radios for mac80211 on a single device. It can be used to test most of the mac80211 functionality and user space tools (e.g., hostapd and wpa_supplicant) in a way that matches very closely with the normal case of using real WLAN hardware. From the mac80211 view point, mac80211_hwsim is yet another hardware driver, i.e., no changes to mac80211 are needed to use this testing tool. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>