aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k
AgeCommit message (Collapse)Author
2009-10-07ath9k: move btcoex core driver info to its own structLuis R. Rodriguez
There is some bluetooth coexistance data which is driver specific, stuff that into its own structure. Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: use ath_hw for DPRINTF() and debug init/exitLuis R. Rodriguez
DPRINTF() is used in hw specific related code, as such ensure we don't rely on the private driver core ath_softc struct when calling it. Drivers can then implement their own DPRINTF() as they see fit. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Initialize txgain and rxgain for newer AR9287 chipsets.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Fix RFKILL bugsSujith
This patch fixes 2 issues in RFKILL: * Calling wiphy_rfkill_stop_polling() in ath9k_stop would mean that the driver cannot report HW status when the radio is re-enabled. Move this to ath_detach(). * Calling ath_radio_{enable/disable} without checking the current state results in ath_radio_enable() being called repeatedly for every invocation of rfkill_poll(). This is not needed in any case since wiphy_rfkill_set_hw_state() would call ->stop() if the radio has been disabled. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Disable autosleep feature by default.Vivek Natarajan
Autosleep needs to be disabled for AR9287 chipsets also. Since autosleep is not used for any of the currently supported chipsets, disable it by default and can be enabled if needed for any of the future chipsets. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Fix regression in PA calibrationSujith
The commit "ath9k: Fix bugs in programming registers during PA CAL" removed a REG_READ of 0x7834. This resulted in incorrect computation of the subsequent value to be written in RF2G6. This patch fixes the regression by re-adding the REG_READ. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Fix bug in chain handlingSenthil Balasubramanian
* This patch fixes a bug in calculating the scaled power for three chain chipsets. * Also, a delay is needed after setting DAC low-power mode in TOP1 RF register (Top Level Register Bits). Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Fix AHB reset for AR9280Vivek Natarajan
The commit "ath9k: Do an AHB reset before doing RTC reset" fixed RTC reset issue for AR9280 2.0 chipsets and above. The fix is valid for all AR9280 chipsets. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Adjust the chainmasks properlySenthil Balasubramanian
This is needed to account for the number of chains in use, not just the number of chains present. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Do a full reset for AR9280Vasanthakumar Thiagarajan
AR9280 requires a full reset during channel change and HW reset. Currently, a fast channel change is done. This patch fixes this bug. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Don't read NF when chip has gone through full sleep modeVasanthakumar Thiagarajan
NF value may be incorrect when we read it just after the chip has gone through a full sleep mode. Reading incorrect NF values affects RX throughput. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Fix rx data corruptionVasanthakumar Thiagarajan
Setting bit 20 and 25 of 0x8344 can cause occasional rx data corruption, clear them to fix this issue. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Fix chip wakeup issueSujith
Waking up the chip after powering it down fails sometimes. In this case the CPU is locked for 200ms. Reduce this interval to 10ms to avoid excessive busy looping. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Restore TSF after RESETSujith
For chips requiring RTC reset, TSF has to be restored after power on reset. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Revamp PCIE workaroundsVivek Natarajan
* Disable L1 state ONLY when device is in D3 mode. * Clear bit 22 of register 0x4004. * Handle power on/off properly Not setting the workarounds properly resulted in the disappearance of the card in certain cases. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Set default noise floor value for AR9287Vivek Natarajan
The default noise floor was never initialized for AR9287.This patch helps in reporting the correct RSSI for this version of chipset. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Fix bug in ANI channel handlingSujith
When processing MIB interrupts, OFDM and CCK error handling routines for low RSSI values have to be invoked only when the channel mode is 11G/11B. Since HT channels will also fall under the bands 2Ghz/5Ghz, check appropriately. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ath9k: Initialize the priority gpio for BT coex 3-wireVasanthakumar Thiagarajan
Oops, a stupid mistake in the original patch which adds coex 3-wire support. Bluetooth priority gpio needs to be gpio 7. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ath9k: Get rid of the modparam btcoex_enableVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ath9k: Enable btcoex based on the subsystem id of the deviceVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ath9k: Store subsystem id in struct hw_versionVasanthakumar Thiagarajan
This subsystem id will be used later to turn on the btcoex support. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ath9k: Remove unnecessary casting to u8 in pci_read_config_byte() callVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ath9k: Disable ASPM when btcoex is activeVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08ath9k: Fix channelFlags for 2GHZSujith
CHANNEL_G has to be set for 2GHZ channels since IS_CHAN_G() checks for this in channelFlags and not in chanmode. To make things messier, ath9k_hw_process_ini() checks for CHANNEL_G in chanmode and not in channelFlags. The supreme, brain-searing fix is to set the flag in both cases. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08ath9k: Fix RX Filter handling for BARSujith
BAR frames have to be sent to mac80211 only if the current channel is HT. Also, move the macro to enum ath9k_rx_filter. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08ath9k: claim irq for ath9k, not ath for pciLuis R. Rodriguez
ath9k ahb requests an IRQ and indicates 'ath9k' claimed it, ath9k pci requests an IRQ and indicates 'ath' claims it; since 'ath' is another module sync both ahb and pci to claim the irq using 'ath9k'. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08ath9k: propagate errors on ath_init_device() and request_irq()Luis R. Rodriguez
We've cleaned up ath_init_device() and its children enough to pass meaninful errors back from probe. When this fails it means our device could not be initialized and a meaninful error will have been passed. Do the same for request_irq() and also synchronize the error messages while at it. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08ath9k: propagate ieee80211_alloc_hw() failureLuis R. Rodriguez
The -ENOMEM was never being passed on failure. While at it use dev_err() as ahb does upon failure. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-02ath9k: Reconfigure beacon timers after the scan is completed.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01ath9k: Call spin_lock_bh() on btcoex_lockVasanthakumar Thiagarajan
As generic hw timer interrupt handler is moved to tasklet, we no more need to call spin_lock_irqsave(). Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01ath9k: Move generic hw timer intr handler to bottom-halfVasanthakumar Thiagarajan
There is no point handling this in hard irq, move it to tasklet. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-31ath9k: Do an AHB reset before doing RTC resetVasanthakumar Thiagarajan
Doing an RTC reset when DMA is active may corrupt memory, make sure no DMA is active at this moment by doing an AHB reset. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Add Bluetooth Coexistence 3-wire supportVasanthakumar Thiagarajan
This patch adds 3-wire bluetooth coex support for AR9285. This support can be enabled through btcoex_enable modparam. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Add infrastructure for generic hw timersVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Remove hw capability bit meant for btcoexVasanthakumar Thiagarajan
We don't need a hw cap bit for btcoex anymore as btcoex scheme type is enough to do this. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Determine btcoex scheme type based on chip versionVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Move btcoex related data to a separate structVasanthakumar Thiagarajan
Also define macros for wlanactive and btactive (5 & 6) gpios. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Configure btcoex register during every resetVasanthakumar Thiagarajan
Make sure btcoex register configured with appropriate values after it is initialized with the default values from initvals.h during reset. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Move btcoex stuff from hw.[ch] to new btcoex.[ch]Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Split ath9k_hw_btcoex_enable() into two logical piecesVasanthakumar Thiagarajan
This function currently does initialization + enable the btcoex support. Split it into two logical functions which does the above operations separately. Btcoex initialization is done during attach time and enabling this feature is done in start(). Also, add code to disable btcoex support in stop(). Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Wrap DMA dump function with PS wakeup/restoreSujith
When dumping register contents, HW has to be awake. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Update INITVALs for AR9285Sujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Handle PA cal usage properlySujith
PA Calibration is not needed for high power solutions. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Fix bugs in programming registers during PA CALSujith
* First PA driver (PDPADRV1) was not powered down properly. * Compensation capacitor for dynamic PA was programmed incorrectly. Also, remove a stray REG_READ. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Reduce the frequency of PA offset calibrationSujith
PA calibration need not be done if the offset is not varying. The current logic does PA calibration even if the offset is the same. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Fix read buffer overflowRoel Kluin
Prevent a read of powInfo[-1] in the first iteration. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Fix chainmask selection during scanningSujith
The TX/RX chainmasks were set to 1x1 during scanning. Configure them properly with the values retrieved from the EEPROM. Also, this requires scan_start/scan_end callbacks to be locked with sc->mutex. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Add support FIF_OTHER_BSS filtering mode.Javier Cardona
Support for FIF_OTHER_BSS was missing. This patch adds support for this filtering mode which in turn resolves a problem where mesh interfaces would not receive broadcast traffic. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath9k: Nuke struct ath9k_node_statsVasanthakumar Thiagarajan
Other than ns_avgbrssi (Average beacon rssi) no data of ath9k_node_stats is being used anywhere. Nuke this structure and move its only useful member to ar5416Anistate. Also cleanup this redundant data in ath_softc. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath9k: Fix bug in retrieving average beacon rssiVasanthakumar Thiagarajan
Currently the beacon rssi that LPF gives is divided and rounded up by ATH_RSSI_EP_MULTIPLIER twice. This will leave the incorrect rssi in ANI. Having correct rssi in ANI fixes the connection stability at < 30dB rssi range. This patch removes the unncessary computation of average rssi over already valid average rssi. Also removes the redundant macros to find average rssi. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 13:54:55 +0000