aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath9k/core.c
AgeCommit message (Collapse)Author
2008-11-26ath9k: Code scrubSujith
Merge core.c and base.c Remove Antenna Diversity (unused now). Remove unused chainmask handling code. Comment, indentation scrub. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Remove ath9k_rate_tableSujith
Maintaining two sets of rate tables is redundant, remove one and use struct ath_rate_table exclusively. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Remove ath_rate_softcSujith
Move the hw rate tables to ath_softc, and access them directly. tx_triglevel_max is global, move it to ath_rate_node. Now that ath_rate_softc is gone, rate control attach becomes simpler. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Nuke fixed rate handling in driverSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Remove half/quarter rate tablesSujith
Half/Quarter rate tables are needed only for legacy chipsets. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25ath9k: Build RFKILL feature even when RFKILL subsystem is a MODULESenthil Balasubramanian
Currently, ath9k builds RFKILL feature only when the RFKILL subsystem is built part of the kernel. Build RFKILL feature regardless of whether RFKILL subsystem is built as a MODULE or part of the kernel. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Remove internal RX A-MPDU processingSujith
mac80211 has RX A-MPDU reordering support. Use that and remove redundant RX processing within the driver. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Enable interrupts at the proper placeSujith
config_interface() was the wrong place to enable interrupts when bringing up an interface, move it to ath_open(). Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Streamline attach/detachSujith
Simplify attach and detach routines by consolidating the stop and suspend functions. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Remove unused function ath_get_currentCountry()Sujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Revamp VAP managementSujith
Remove the internal VAP management routines and embed ath_vap in mac80211's driver private area provided in ieee80211_vif. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Simplify node attach/detach routinesSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Node cleanupSujith
Start removing the internal node list in ath9k, in preparation for using mac80211's STA list. Remove lists, locks, routines, flags, functions managing nodes in ath9k. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-27net: convert print_mac to %pMJohannes Berg
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-06ath9k: enable ANI to help with noisy environmentsLuis R. Rodriguez
This enables Adaptive Noise Immunity (ANI) on ath9k. ANI is as algorithm designed to minimize the detrimental effects of time-varying interferences. This should help with throughput in noisy environments. To use ANI we re-enable the MIB interrupt. Since ANI works on a timer and updates the noise floor we take advantage of this and also report a non-static noise floor now to mac80211. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: Jouni Malinen <Jouni.Malinen@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-06ath9k: kill ath9k's memzero() and use memset() insteadLuis R. Rodriguez
Part of the cleanup on ath9k -- this was also causing some annoying compile time warnings. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-06ath9k: fixup some merge damageJohn W. Linville
This hunk was originally removed as part of "ath9k: Fix IRQ nobody cared issue with ath9k". Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-01Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath9k/core.c drivers/net/wireless/ath9k/main.c net/core/dev.c
2008-09-24ath9k: Fix TSF Adjust usageSujith
TSF adjust is needed only for AP mode when staggered beacons are used. Since we support only a single interface in IBSS mode, disable setting the TSF adjust register. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-24ath9k: disable MIB interrupts to fix interrupt stormLuis R. Rodriguez
Enabling the MIB interrupts has proven to cause an interrupt storm after 7 hours of run. We will make use of the MIB interrupt once we have ANI supported added so for now to cure this we disable the interrupt. The interrupt storm can be seen as follows after 7 hours of run as reported by Steven Noonan <steven@uplinklabs.net>: 18:28:38 sum 1106.00 18:28:39 sum 1037.62 18:28:40 sum 1069.00 18:28:41 sum 1167.00 18:28:42 sum 1155.00 18:28:43 sum 1339.00 18:28:44 sum 18355.00 18:28:45 sum 17845.45 18:28:46 sum 15285.00 18:28:47 sum 17511.00 18:28:48 sum 17568.69 18:28:49 sum 17704.04 18:28:50 sum 18566.67 18:28:51 sum 18913.13 at 18:28:44 the MIB interrupt kicked off and caused huge latency which can be seen even on a video he submitted: http://www.youtube.com/watch?v=4GeCx1gZMpA Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-22ath9k: Fix IRQ nobody cared issue with ath9kSenthil Balasubramanian
IRQs should be disabled before calling free_irq. Also flush pending IRQs. Pasted the kernel log message for reference. kernel: irq 17: nobody cared (try booting with the "irqpoll" option) kernel: [<c0252d2c>] __report_bad_irq+0x2e/0x6f kernel: [<c0252f22>] note_interrupt+0x1b5/0x207 kernel: [<c025258b>] ? handle_IRQ_event+0x21/0x48 kernel: [<c02534cb>] handle_fasteoi_irq+0x8e/0xad kernel: [<c0205650>] do_IRQ+0x6c/0x84 kernel: [<c020425f>] common_interrupt+0x23/0x28 kernel: [<c034f6f6>] ? acpi_idle_enter_simple+0x198/0x205 kernel: [<c044686c>] ? menu_select+0x5c/0x78 kernel: [<c0445a95>] cpuidle_idle_call+0x59/0x89 kernel: [<c02029d7>] cpu_idle+0xae/0xcf kernel: [<c0543102>] rest_init+0x4e/0x50 kernel: ======================= kernel: handlers: kernel: [<f88fdd26>] (ath_isr+0x0/0x13a [ath9k]) kernel: Disabling IRQ #17 Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Tested-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Use mac80211 for multicast power save bufferingJouni Malinen
Replace the internal ath9k implementation of multicast/broadcast frame power save buffering (AP mode) in ath9k with use of mac80211 ieee80211_get_buffered_bc() mechanism. This removes quite a bit of duplicated functionality and simplifies the driver part. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Miscellaneous fixesSujith
This patch removes ath_vap_listen() and dma wrapper macros. Also, Inline abuse is cleaned up and a few typos are fixed. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Random cleanupSujith
Remove dead code, add newlines, fix indentation. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Remove remaining occurences of ath_skb_map functionsSujith
Use direct pci functions instead. Also, use sc_ht_info.tx_chan_width directly and remove ath_cwm_macmode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Allow AP mode to be enabledJouni Malinen
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Trim struct ath_softcSujith
Add sc_rxflush and sc_noreset as bitfields to sc_flags. Remove a few variables and function prototypes that are unused. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Use ah_curchan and remove sc_curchan which is redundantSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Use bitfields for sc operationsSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Use a single opmode variableSujith
ah_opmode and sc_opmode are redundant. This patch removes sc_opmode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: RX Filter cleanupSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Merge reset functionsSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07ath9k: Revamp wireless mode usageSujith
Use a single enum for managing modes, store supported modes by the HW in a bitmask. Register legacy rates with mac80211 only at init. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07ath9k: Cleanup data structures related to HW capabilitiesSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07ath9k: Add new Atheros IEEE 802.11n driverLuis R. Rodriguez
This adds the new mac80211 11n ath9k Atheros driver. Only STA support is currently enabled and tested. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Jack Howarth <howarth@bromo.msbb.uc.edu> Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-07 00:51:27 +0000