aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/b43
AgeCommit message (Collapse)Author
2008-01-28wireless: cleanup some merge errorsJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Fix for broken transmissionMichael Buesch
This patch fixes the transmission problems introduced by commit f04b3787bbce4567e28069a9ec97dcd804626ac7 I'm not sure if the dummy read is really required. The old code does it. I think it can't hurt and can possibly fix some write posting problems (hardware bugs or whatever. Who knows). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Fix ofdmtab write regressionMichael Buesch
commit f04b3787bbce4567e28069a9ec97dcd804626ac7 introduced a regression for the ofdmtable writing. It incorrectly removed the writing of the high 16bits for a 32bit table write and initialized the direction identifier too late. This patch does also some cleanups to make the code much more readable and adds a few comments, so non rocket scientists are also able to understand what this address caching is all about. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Changes to enable BCM4311 rev 02 with wireless core revision 13Larry Finger
The BCM94311MCG rev 02 chip has an 802.11 core with revision 13 and has not been supported until now. The changes include the following: (1) Add the 802.11 rev 13 device to the ssb_device_id table to load b43. (2) Add PHY revision 9 to the supported list. (3) Change the 2-bit routing code for address extensions to 0b10 rather than the 0b01 used for the 32-bit case. (4) Remove some magic numbers in the DMA setup. The DMA implementation for this chip supports full 64-bit addressing with one exception. Whenever the Descriptor Ring Buffer is in high memory, a fatal DMA error occurs. This problem was not present in 2.6.24-rc2 due to code to "Bias the placement of kernel pages at lower PFNs". When commit 44048d70 reverted that code, the DMA error appeared. As a "fix", use the GFP_DMA flag when allocating the buffer for 64-bit DMA. At present, this problem is thought to arise from a hardware error. This patch has been tested on my system and by Cédric Caumont <icare40@hotmail.com>. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: reinit on too many PHY TX errorsStefano Brivio
Restart the hardware on too many PHY TX errors. A thousand PHY TX errors per 15 seconds means we won't be able to recover for sure. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: include FCS in frames handed to mac80211Johannes Berg
Sometimes it can be useful to see the FCS, especially when bad-FCS frames are shown. Pass the FCS to mac80211 and let it worry about snipping it off when required. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: include full 64-bit timestamp in monitor modeJohannes Berg
When monitor mode is enabled, this will make b43 read out the full 64-bit MAC time from the chip for each received packet. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Convert to use of the new SPROM structureLarry Finger
The b43 driver is modified to use the new SPROM structure. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: silence a bogus gcc warningFrank Lichtenheld
use uninitialized_var() to avoid the following bogus warning: CC [M] drivers/net/wireless/b43/debugfs.o drivers/net/wireless/b43/debugfs.c: In function ‘b43_debugfs_read’: drivers/net/wireless/b43/debugfs.c:355: warning: ‘ret’ may be used uninitialized in this function Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43/b43legacy: fix my copyright noticesStefano Brivio
Fix my copyright notices in b43 and b43legacy. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: rewrite A PHY initializationStefano Brivio
Rewrite and sync A PHY initialization with specs, thus allowing for further work to be done on 802.11a support. Note that A PHY initialization involves G PHYs as well. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: consistent naming for ieee80211_opsMichael Buesch
Use a consistent naming scheme for the ops. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Use the retry limit parameters from mac80211Michael Buesch
Use the limits provided by mac80211. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Dereference of wl->current_dev must be protected by wl->mutexMichael Buesch
Put all access to wl->current_dev under protection of the mutex. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Larry Finger <larry.finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28wireless: make drivers include the TSF RX flag where appropriateJohannes Berg
These drivers pass full mactime information to the stack, make them indicate this via the new RX_FLAG_TSFT to get mac80211 to show this information in monitor mode. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-16b43: fix use-after-free rfkill bugStefano Brivio
Fix rfkill code which caused a use-after-free bug. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-08b43: Fix rxheader channel parsingMichael Buesch
This patch fixes the parsing of the RX data header channel field. The current code parses the header incorrectly and passes a wrong channel number and frequency for each frame to mac80211. The FIXMEs added by this patch don't matter for now as the code where they live won't get executed anyway. They will be fixed later. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-17b43: Fix rfkill radio LEDLarry Finger
This fixes Bug #9414 Since addition of the rfkill callback, the LED associated with the off switch on the radio has not worked for several reasons: (1) Essential data in the rfkill structure were missing. (2) The rfkill structure was initialized after the LED initialization. (3) There was a minor memory leak if the radio LED structure was inited. Once the above problems were fixed, additional difficulties were noted: (4) The radio LED was in the wrong state at startup. (5) The radio switch had to be manipulated twice for each state change. (6) A circular mutex locking situation existed. (7) If rfkill-input is built as a module, it is not automatically loaded. This patch fixes all of the above. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29drivers/net/wireless: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29b43/b43legacy: fix left-over URLs and ifdefsStefano Brivio
Fix some left-over URLs and ifdefs in b43 and b43legacy drivers. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: Fix kconfig dependencies for rfkill and ledsMichael Buesch
Fix dependencies for built-in b43. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: properly request pcmcia IRQMichael Buesch
PCMCIA needs an additional step to request the IRQ. No need to add code to release the IRQ here, as that's done automatically in pcmcia_disable_device(). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: fix shared IRQ race conditionStefano Brivio
Fix an IRQ race condition in b43. If we call b43_stop_wireless_core(), it will set the status of the device to INITIALIZED and the IRQ handler won't care any longer about IRQs, thus the kernel will disable the IRQ if it's shared (unless we boot it with the 'irqpoll' option). So we must disable IRQs before changing the device status. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: Rewrite and fix rfkill initMichael Buesch
The rfkill subsystem doesn't like code like that rfkill_allocate(); rfkill_register(); rfkill_unregister(); rfkill_register(); /* <- This will crash */ This sequence happens with modprobe b43 ifconfig wlanX up ifconfig wlanX down ifconfig wlanX up Fix this by always re-allocating the rfkill stuff before register. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: debugfs SHM read buffer overrun fixMichael Buesch
Fix possible buffer overrun. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: Fix rfkill callback deadlockMichael Buesch
wl->mutex might already be locked on initialization. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: pcmcia-host initialization bugfixesMichael Buesch
Fix the initialization for PCMCIA devices. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-25[PATCH] b43/b43legacy: jiffies_round -> jiffies_round_relativeAnton Blanchard
When rounding a relative timeout we need to use round_jiffies_relative(). Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-18[PATCH] b43: Make b43_stop() staticMichael Buesch
This fixes a sparse warning. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-18[PATCH] drivers/net/wireless/b43/main.c: fix an uninitialized variableWANG Cong
Fix an uninitialized variable in drivers/net/wireless/b43/main.c::b43_start(). Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Michael Buesch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-18[PATCH] janitorial: fix all double includes in drivers/net/wirelessHolger Schurig
This patch removes all double includes of the same file. This makes scripts/checkincludes.pl happy. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-13b43 wireless needs <linux/io.h>Geert Uytterhoeven
b43 wireless needs <linux/io.h> linux/drivers/net/wireless/b43/pio.h: In function 'b43_pio_write': linux/drivers/net/wireless/b43/pio.h:89: error: implicit declaration of function 'mmiowb' linux/drivers/net/wireless/b43/phy.c: In function 'b43_phy_write': linux/drivers/net/wireless/b43/phy.c:301: error: implicit declaration of function 'mmiowb' linuxdrivers/net/wireless/b43/sysfs.c: In function 'b43_attr_interfmode_store': linuxdrivers/net/wireless/b43/sysfs.c:147: error: implicit declaration of function 'mmiowb' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-10[MAC80211]: remove ALG_NONEJohannes Berg
This "algorithm" is used only internally and is not useful. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Michael Buesch <mb@bu3sch.de> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[B43]: Rewrite pwork locking policy.Michael Buesch
Implement much easier and more lightweight locking for the periodic work. This also removes the last big busywait loop and replaces it by a sleeping loop. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[B43]: Use input-polldev for the rfkill switchMichael Buesch
This removes the direct call to rfkill on an rfkill event and replaces it with an input device. This way userspace is also notified about the event. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[B43]: RF-kill supportMichael Buesch
This adds full support for the RFKILL button and the RFKILL LED trigger. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[B43]: LED triggers supportMichael Buesch
Drive the LEDs through the generic LED triggers. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Larry Finger <larry.finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[PATCH] mac80211: revamp interface and filter configurationJohannes Berg
Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[B43]: Support for turning the radio off from software.Michael Buesch
This adds support for turning the radio off in software. That's useful in environments, where you don't want the RF to radiate any signals, but don't want to bring the interface down. Cc: Larry Finger <larry.finger@lwfinger.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[B43]: Remove the "radio hw enabled" message on startup.Michael Buesch
This message is useless. Only report state changes. Cc: Larry Finger <larry.finger@lwfinger.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[B43]: Change loglevel of radio-enable message.Michael Buesch
Also cleanup the code a bit and remove the inline. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[B43]: Don't lock irq_lock in debugfs txpower adjustMichael Buesch
It's not required and the txpower adjustment must not be in atomic. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[B43]: Fix sparse warnings.Michael Buesch
The remaining warning in phy.c will be fixed later. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[B43]: add mac80211-based driver for modern BCM43xx devicesMichael Buesch
Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 07:50:17 +0000