aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi
AgeCommit message (Collapse)Author
2009-07-10mac80211: push rx status into skb->cbJohannes Berg
Within mac80211, we often need to copy the rx status into skb->cb. This is wasteful, as drivers could be building it in there to start with. This patch changes the API so that drivers are expected to pass the RX status in skb->cb, now accessible as IEEE80211_SKB_RXCB(skb). It also updates all drivers to pass the rx status in there, but only by making them memcpy() it into place before the call to the receive function (ieee80211_rx(_irqsafe)). Each driver can now be optimised on its own schedule. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10iwlwifi: remove disable_tx_power for device > 4965Wey-Yi Guy
After 4965, tx_power_calibration moved from driver to uCode. remove "disable_tx_power" from debugfs to minimize the confusion. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10iwlwifi: no need to refer to max_nrg_cck range valueWey-Yi Guy
max_nrg_cck value inside the sensitivity range structure is not needed for sensitivity calibration. Keep the parameter in sensitivity structure but set the value to "0" in case needed in the future implementation. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10iwlwifi: modify sensitivity value for 5150Wey-Yi Guy
In 5150 there is a long delay between the AGC(Automatic Gain Control) command till the RF is stabilized causing us to miss detections when there was adjacent channel noise, so we need to adjusted the Sensitivity calibration for 5150 differently. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi/iwl3945: fix suspend resume association bugAbhijeet Kolekar
Patch fixes the following bugs at http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=2005 http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=2007 If we suspend with an association and then resumed, we need to synchronize the active rxon with staging rxon, else we will get an error when iwl_alive_start try to commit rxon and staging is set to channel 0. Before going to suspend staging and active rxon are in sync. After resuming from the suspend, iwl_mac_start is called and it clears the staging rxon. Patch fixes the bug by not clearing the staging rxon in iwl_mac_start. Patch also adds similar fix to 3945. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi: check for channel location for 40MHzWey-Yi Guy
for both mixed and pure 40MHz, need to check for valid channel location. if the specified channel not allow the channel location requested (ABOVE, BELOW), then reject the Fat channel access This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1988 ("iwlwifi: checking for 40MHz mode" and "iwlwifi: check control channel for pure 40MHz" combine with this to address the above bug. -- JWL) Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi: check control channel for pure 40MHzWey-Yi Guy
for pure 40MHz mode, set the control channel location if provided, but not like Mixed mode; if information is not provided, still allow 40MHz operation. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi: checking for 40MHz modeWey-Yi Guy
when checking for 40MHz, compare ht_protection to IEEE80211_HT_OP_MODE_PROTECTION_20MHZ. ht_protection is not a bit-mask field Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi: revamp bss_info_changedJohannes Berg
My earlier patch, "mac80211: unify config_interface and bss_info_changed" introduced a bug in iwlwifi where it will do some things incorrectly now when reassociating. Revamp iwl_bss_info_changed to fix that issue and make it easier to read. Also, while at it, add comments about things that it should do but currently doesn't. Finally, also improve the locking in the function. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c
2009-06-12trivial: Kconfig: .ko is normally not included in module namesPavel Machek
.ko is normally not included in Kconfig help, make it consistent. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-10iwlwifi: port to cfg80211 rfkillJohannes Berg
This ports the iwlwifi rfkill code to the new API offered by cfg80211 and thus removes a lot of useless stuff. The soft- rfkill is completely removed since that is now handled by setting the interfaces down. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-04iwlwifi: fix comment describing disable_11nReinette Chatre
Fixing a comment in the code describing this module parameter. The description printed when user runs "modinfo" is correct. Reported-by: Jiajia Zheng <jiajia.zheng@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-04iwlwifi: add value and range define for link quality commandWey-Yi Guy
Instead of hardcoding the link quality parameters inside the functions, adding #define in iwl-commands.h to shared by different functions. Also include the valid range for number of link quality parameters. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-04iwlagn: delay ict interrupt.Mohamed Abbas
Wait until ucode is loaded and driver receive ALIVE_REPLY then switch to ICT interrupt. This ensures we receive all interrupts indicating successful ucode load. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-04iwl3945/iwlwifi: fix led bug when SW rfkillAbhijeet Kolekar
Patch fixes the bug at http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1903 when SW rfkill is invoked by 'iwconfig txpower off', the existing connection disassociates and led off command is sent to the device which returns error as rfkill is 'true'. Patch fixes this by just avoiding sending the led off/on command when disassociated. The main purpose of the led_disassociate callback is to start or stop the blinking. There are three states in led 1) Always on when radio is on 2) Always off when radio is off 3) blink when associated and if there is some traffic. In this callback 'allow_blinking' needs to be set false when associated, as LED will be always on. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-04iwl3945: port allow skb allocation in tasklet patchAbhijeet Kolekar
Port "iwlcore: Allow skb allocation from tasklet." to 3945 If RX queue becomes empty then we need to restock the queue from tasklet to prevent ucode from starving. A caller to iwl_rx_allocate will decide if allocated buffer should come from GFP_ATOMIC or GFP_KERNEL. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-04iwlwifi: unify station managementTomas Winkler
This patch unifies 3945 and AGN station management It also removes useless struct iwl_station_mgmt ops and cleanups a bit the interface Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03rfkill: rewriteJohannes Berg
This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03iwlwifi: avoid build warning in iwl-core.Rami Rosen
When building when CONFIG_IWLWIFI_DEBUG is not set, we get the following warning: /work/src/w/drivers/net/wireless/iwlwifi/iwl-core.c: In function ‘iwl_isr’: /work/src/w/drivers/net/wireless/iwlwifi/iwl-core.c:1707: warning: unused variable ‘inta_fh’ This patch avoids this warning by adding #ifdef CONFIG_IWLWIFI_DEBUG before the declaration of inta_fh in iwl_isr() in drivers/net/wireless/iwlwifi/iwl-core.c Signed-off-by: Rami Rosen <ramirose@gmail.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03iwlwifi: fix otp access initReinette Chatre
Polling function returns positive time if polling was needed to read value. This is still success. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03iwlwifi: fix merge errorReinette Chatre
This hunk of code was removed in patch "iwlwifi: do not cancel delayed work inside spin_lock_irqsave" submitted at http://marc.info/?l=linux-wireless&m=124267503030042&w=2 This same patch in this repo does not remove this hunk. Remove it here. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-25Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath/ath5k/phy.c drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl3945-base.c
2009-05-22iwlwifi: check for valid band for channel infoWey-Yi Guy
when display channel info in debugfs, always check for valid band before access the pointer and display information for 1000 NIC, it only support "bgn" mode, so there is no 5.2GHz channels available to display. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlagn: co-exist with AMTMohamed Abbas
Enable using iwlwifi driver in AMT system. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlcore: Set rb_timeout to 0x10 for devices with ICTMohamed Abbas
rb value should be 0x10 for devices using ICT. RX interrupt was not performing well with 0 value Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlcore: Add support for periodic RX interruptMohamed Abbas
Periodic RX interrupt needed with ICT interrupt to prevent RX race. Sending RX interrupt require many steps to be done in the the device: 1- write interrupt to current index in ICT table. 2- dma RX frame. 3- update RX shared data to indicate last write index. 4- send interrupt. This could lead to RX race, driver could receive RX interrupt but the shared data changes does not reflect that. this could lead to RX race, RX periodic will solve this race Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlcore: Allow skb allocation from tasklet.Mohamed Abbas
If RX queue becomes empty then we need to restock the queue from tasklet to prevent ucode from starving. A caller to iwl_rx_allocate will decide if allocated buffer should come from GFP_ATOMIC or GFP_KERNEL. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlcore: support ICT interruptMohamed Abbas
Add ICT interrupt handler support, ICT should improve CPU utilization since it does not require target read which is very expensive. This interrupt handler only added to 5000 cards and newer. Device will write interrupts to ICT shared table to inform driver about its interrupts. These patches will not touch 3945 and 4965 interrupt handlers and tasklet. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlwifi: support "pure 40MHz" in RXON commandWey-Yi Guy
Fix the bug when using 11n "pure 40MHz" mode cause uCode crashing by adding support for "pure 40MHz" in RX_ON command flag. the "mode" field (bits 25:26) has value of 0-3 0 = 20 MHz only 1 = 40MHz only 2 = Mixed 3 = Reserved Control Channel ID (bit 22) is valid only in Mixed mode. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlwifi: report the rate index as an MCS rate numberWey-Yi Guy
If transmit in HT rate, report the rate index as an MCS rate number instead of an index. so "iw" can display correct BitRate Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlcore: register locksMohamed Abbas
Add new lock to be used when accessing some registers. Also move the register lock and iwl_grab_nic_access inside the function for register access. This will prevent from forgetting to hold locks and nic access in the right way and make code easier to maintain. We over use the priv->lock spin lock and I guess we need to add new one for Tx queue after that we might need to change most of these lock to BH and just keep priv->lock as irq type. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlwifi: support NVM access (EEPROM/OTP)Wey-Yi Guy
Two type of NVM available for devices 1000, 6000 and after, adding support to read OTP lower blocks if OTP is used instead of EEPROM. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlwifi: Temperature sensor voltage reading for 5150Wey-Yi Guy
The temperature measurement by uCode for 5150 and 5000 are different CSR_HW_REV_TYPE_5150: temperature sensor output voltage CSR_HW_REV_TYPE_5000: temperature in Celsius temperature related operation for 5150 is measured by temperature sensor output voltage; additional conversion is required for set and store the temperature. To make sure support different HW design; implement _ops method for temperature related functions (temperature reading and set ct kill threshold) Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlwifi: add Greenfield support for 11nWey-Yi Guy
Add "Greenfield" support for all devices except 4965 and 3945. "Greenfield" is part of 11n features to improve HT performance. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwl3945: improve 3945 ledsAbhijeet Kolekar
'tpt' is a delta throughput (number of packets) and is corelated to brightness of the LED. We already maintain a delta of packets in rxtxpackets. There is no need to calculate this delta again which was affecting the behaviour of LEDS. Also add two new callback functions for ASSOCIATED/DISASSOCIATED states where LED's will be *on* for associated state and *off* for disassociated state. This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1771. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20drivers/net: use dev_get_drvdataJulia Lawall
Eliminate direct accesses to the driver_data field. cf 82ab13b26f15f49be45f15ccc96bfa0b81dfd015 The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct device *dev; expression E; type T; @@ - dev->driver_data = (T)E + dev_set_drvdata(dev, E) @@ struct device *dev; type T; @@ - (T)dev->driver_data + dev_get_drvdata(dev) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20iwlwifi: drop iwl3945_tid_dataTomas Winkler
This patch is one of the incremental steps for unifying iwl_station_entry for all HWs, i.e. removing of iwl3945_station_entry This patch drops iwl3945_tid_data and use iwl_tid_data instead. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20iwlwifi: drop struct iwl3945_hw_keyTomas Winkler
This patch replaces struct iwl3945_hw_key by struct iwl_hw_key. It's not used directly with any host command therefore removal is trivial Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20wireless: rename IEEE80211_CHAN_NO_FAT_* to HT40-/+Luis R. Rodriguez
This is more consistent with our nl80211 naming convention for HT40-/+. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20iwlwifi: update 5000 ucode support to version 2 of APIJay Sternberg
enable iwl driver to support 5000 ucode having version 2 of API Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20iwlwifi: do not cancel delayed work inside spin_lock_irqsaveReinette Chatre
Calling cancel_delayed_work() from inside spin_lock_irqsave, introduces a potential deadlock. As explained by Johannes Berg <johannes@sipsolutions.net> A - lock T - timer phase CPU 1 CPU 2 --------------------------------------------- some place that calls cancel_timer_sync() (which is the | code) lock-irq(A) | "lock-irq"(T) | "unlock"(T) | wait(T) unlock(A) timer softirq "lock"(T) run(T) "unlock"(T) irq handler lock(A) unlock(A) Now all that again, interleaved, leading to deadlock: lock-irq(A) "lock"(T) run(T) IRQ during or maybe before run(T) --> lock(A) "lock-irq"(T) wait(T) We fix this by moving the call to cancel_delayed_work() into workqueue. There are cases where the work may not actually be queued or running at the time we are trying to cancel it, but cancel_delayed_work() is able to deal with this. Also cleanup iwl_set_mode related to this call. This function (iwl_set_mode) is only called when bringing interface up and there will thus not be any scanning done. No need to try to cancel scanning. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13224, which was also reported at http://marc.info/?l=linux-wireless&m=124081921903223&w=2 . Tested-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/scsi/fcoe/fcoe.c
2009-05-11iwlwifi: default WMM AC parametersWey-Yi Guy
Set the default WMM AC parameters for BK/BE/VI/VO parameters: AC CWmin CW max AIFSN TXOP Limit TXOP Limit (802.11b) (802.11a/g) AC_BK 15 1023 7 0 0 AC_BE 15 1023 3 0 0 AC_VI 7 15 2 188 94 (6.016ms) (3.008ms) AC_VO 3 7 2 102 47 (3.264ms) (1.504ms) Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11iwlwifi: show qos AC parametersWey-Yi Guy
Show current qos AC parameters in sysfs Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11iwlagn: show current rate scale data in debugfsWey-Yi Guy
Add "rate_scale_data" debugfs file to show current bit rate (HT and Legacy), plus additional information (rssi, noise, tsf, beacon time stamp). Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11iwlwifi: use #define instead of hard coded valueWey-Yi Guy
Instead of hard coded value, use the define in iwl-commands.h for better code maintenance Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11iwl3945: read rev id in nic configAbhijeet Kolekar
Read rev id in nic_config instead of nic_init. Nic_config has some checking for rev_id but we actually don't read the rev_id in there. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11iwlwifi: more descriptive unsupported hardware messageReinette Chatre
Somehow these pre-production cards are showing up in the community. With this message we hope that it will be clear that the hardware is not supported. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11iwlagn: improve rate scale table searchMohamed Abbas
iwlagn rate scaling will periodically search other rate scale tables to switch to the best table regarding performance. In the past the number of search tables were 3. Every time the rate scale algorithm goes through these available tables in will stay in current table for some time before start searching again. Recent driver support more feature and antenna, so we have more tables to search. This patch make sure we go through all available tables. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-06 19:31:38 +0000