aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwmc3200wifi
AgeCommit message (Collapse)Author
2009-11-11iwmc3200wifi: declare MODULE_FIRMWAREBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30wireless: remove WLAN_80211 and WLAN_PRE80211 from KconfigJohn W. Linville
With the WLAN_PRE80211 drivers moved to drivers/staging, this distinction becomes unnecessary. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: handle coexistence radio notificationZhu Yi
Handle WiFi/WiMax coexistence radio preemption notification event. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Set wiphy firmware versionSamuel Ortiz
Our wiphy firmware version is a combination of the UMAC and LMAC ones. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Support unexpected reboot barkerSamuel Ortiz
We can receive unexpected reboot barker at any time, and we're supposed to reset the whole device then. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Try shared auth when open WEP failsSamuel Ortiz
When we fail to associate with an open WEP AP, we fall back to shared auth. This allows us to support joining a shared auth WEP AP with iwconfig. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Do not handle wifi command if the interface is not readySamuel Ortiz
When resetting or bringing the interface down, we should just reject any wifi related command. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Check for cmd pointer before dereferencing itSamuel Ortiz
The wifi_if_wrapper notification handling code uses a cmd pointer without checking if it's valid or not. We're dereferencing it because we assume that we only get to that point if there was a pending command for us. That's not always true, so we'd better check. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: SDIO disable race fixSamuel Ortiz
When calling sdio->bus_disable(), we are flushing the command lists before disabling the sdio function. We can thus potentially get a command response after having flushed the command list. To avoid that race, we have to call iwm_reset() after disabling the sdio function. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Tx power settingSamuel Ortiz
We can now set the Tx power from e.g. iwconfig. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Update fixed size config definitionsSamuel Ortiz
We need to be in sync with the latest firmware API. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Update statistics notification structureSamuel Ortiz
The latest firmware adds a ht_rates and a chain_energy field. The latter is needed as we want to eventually support RSSI/antenna handling. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Improve rx debugSamuel Ortiz
We display the correct DROP/RELEASE string for each rx packets, and when it's dropped we also display the reason. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Profile flags can be WPA1 or WPA2 not bothSamuel Ortiz
UMAC will ASSERT if the profile security flag is WPA1 | WPA2, so we can only accept one of those. Moreover wpa_s wext and nl80211 drivers dont try to send WPA1 | WPA2, but only one at a time. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: CT kill supportSamuel Ortiz
We set the initial CT (Temperature control) value to 110 degrees. If the chip goes over that threshold, we hard block the device which will turn it down. At the same time we schedule a 30 seconds delayed work that unblock the device (and userspace is supposed to bring it back up), hoping that the chip will have cooled down by then... Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: WPS supportSamuel Ortiz
By setting the WSC profile flag, we now support WPS as an enrollee. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: allow joining an existed IBSS networkZhu Yi
We used to only support creating a new IBSS network. Now joining to an existed IBSS network is supported as well. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: add BGN sdio device idZhu Yi
Add BGN SKU sdio device id. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-19iwmc3200wifi: select IWMC3200TOP in KconfigTomas Winkler
iwmc3200wifi requires iwmc3200top for its operation Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07iwmc3200wifi: support ETHTOOL_GPERMADDRJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-15debugfs: Change debugfs directory of IWMC3200GeunSik Lim
Change default debugfs directory that mount for debugging IWMC3200(Intel Wireless Multicomm 3200 WiFi driver). As we all know, We need change default directory for consistency of debugfs by Greg.K.H Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-01iwmc3200wifi: Add a last_fw_err debugfs entrySamuel Ortiz
In order to check what was the last fw error we got accross resets, we add this debugfs entry. It displays the complete ASSERT information. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: Handle UMAC stalls and UMAC assert properlySamuel Ortiz
When UMAC stalls or asserts, we want to reset the device. But when we're associated, the current reset worker will end up calling cfg80211_connect_result() with the cfg80211 sme layer knowing that we're reassociating. That ends up with some ugly warnings. With this patch we're telling the upper layer that we've roamed if reassociation succeeds, and that we're disconnected if it fails. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: New initial LMAC calibrationSamuel Ortiz
The LMAC calibration API got broken mostly by having a configuration bitmap being different than the result one. This patch tries to address that issue by correctly running calibrations with the newest firmwares, and keeping a backward compatibility fallback path for older firmwares, where the configuration and result bitmaps were identical. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: fix misuse of le16_to_cpuZhu Yi
Also mark some functions static. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: add disconnect workZhu Yi
When the driver receives "connection terminated" event from device, it could be caused by 2 reasons: the firmware is roaming or the connection is lost (AP disappears). For the former, an association complete event is supposed to come within 3 seconds. For the latter, the driver won't receive any event except the connection terminated. So we kick a delayed work (5*HZ) when we receive the connection terminated event. It will be canceled if it turns out to be a roaming event later. Otherwise we notify SME and userspace the disconnection. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: use cfg80211_roamed to send roam eventZhu Yi
The device sends connection terminated and [re]association success (or failure) events when roaming occours. The patch uses cfg80211_roamed instead of cfg80211_connect_result to notify SME for roaming. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: Fix sparse warningSamuel Ortiz
iwm_cfg80211_get_station() should be static. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: Set WEP key from connectSamuel Ortiz
When connect is called with the LEGACY_PSK authentication type set, and a proper sme->key, we need to set the WEP key straight after setting the profile otherwise the authentication will never start. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: invalidate profile when necessary before connectZhu Yi
If cfg80211 requests to connect when we have already had an active profile, invalidate the current profile first before sending a new profile to UMAC. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-12Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: arch/microblaze/include/asm/socket.h
2009-08-04iwmc3200wifi: avoid setting default key for 802.1X and RSNAZhu Yi
UMAC only allows us to set default key for WEP and auth type is not 802.1X or RSNA. This patch fixes iwmc3200wifi for 802.1X with WEP104. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04iwmc3200wifi: set WEP key static flag correctlyZhu Yi
We should only set the static_key flag for open and legacy authentication types. It should not be set for 802.1X and TKIP. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04iwmc3200wifi: fix set_wpa_version and set_auth_type orderZhu Yi
iwm->umac_profile->sec.flags is set by iwm_set_wpa_version and checked by iwm_set_auth_type. The patch changes the order to make the flag used correctly. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-03drivers/net/wireless: introduce missing kfreeJulia Lawall
Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-30Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-07-30Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-3945.h drivers/net/wireless/iwlwifi/iwl-tx.c drivers/net/wireless/iwlwifi/iwl3945-base.c
2009-07-29cfg80211: self-contained wext handling where possibleJohannes Berg
Finally! This is what you've all been waiting for! This patch makes cfg80211 take care of wext emulation _completely_ by itself, drivers that don't need things cfg80211 doesn't do yet don't even need to be aware of wireless extensions. This means we can also clean up mac80211's and iwm's Kconfig and make it possible to build them w/o wext now! RIP wext. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29cfg80211: combine IWESSID handlersJohannes Berg
Since we now have handlers IWESSID for all modes, we can combine them into one. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29cfg80211: combine IWAP handlersJohannes Berg
Since we now have IWAP handlers for all modes, we can combine them into one. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29cfg80211: combine iwfreq implementationsJohannes Berg
Until now we implemented iwfreq for managed mode, we needed to keep the implementations separate, but now that we have all versions implemented we can combine them and export just one handler. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27wireless: ERR_PTR vs nullDan Carpenter
iwm_wdev_alloc() returns an ERR_PTR on failure and not null. It also prints its own dev_err() message so I removed that as well. Compile tested only. Sorry. Found by smatch (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-26imwc3200: move iwmc3200 SDIO ids to sdio_ids.hTomas Winkler
1. add intel's sdio vendor id to sdio_ids.h 2. move iwmc3200 sdio devices' ids to sdio_ids.h Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-24iwmc3200wifi: fix a use-after-free bugZhu Yi
The patch fixes a use-after-free bug for cmd->seq_num; Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: fix cfg80211_connect_result is called in IBSSZhu Yi
Avoid calling cfg80211_connect_result() in IBSS mode. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: use cfg80211_connect_result to send req/resp IEZhu Yi
cfg80211_connect_result() let us specify associate request and response IEs as parameters after we are connected. We use this capability instead of doing it ourselves with WEXT. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: remove key caches in driverZhu Yi
cfg80211 now guarantees keys are set after connecting. We can remove the key cache code from the driver now. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: make iwm_send_wifi_if_cmd return 0 on successZhu Yi
We used to return the result of wait_event_interruptible_timeout() which is the remaining timeout on success. But this information is not used by any of its callers. So we just return 0 on success. This fixed a erroneous return value bug for iwm_set_key(). Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: remove setting WEP keys before setting essid supportZhu Yi
The recent cfg80211 "rework key operation" patch from Johannes Berg makes sure keys are set only after the connection has been established. So we can remove the setting WEP keys before essid support from the driver. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: cfg80211 managed mode portSamuel Ortiz
This patch ports iwmc3200wifi to the cfg80211 managed mode API. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 03:39:35 +0000