aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/libertas/join.c
AgeCommit message (Collapse)Author
2008-01-28libertas: slight cleanup of netif queue stop/wakeDavid Woodhouse
In particular, we shouldn't be waking the queues in lbs_host_to_card_done() any more. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: kill struct lbs_adapterDavid Woodhouse
There seems to be no reason for a separate structure; move it all into struct lbs_private. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: tweak association debug outputHolger Schurig
Change debug output codes from LBS_DEB_JOIN to LBS_DEB_ASSOC Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: remove arbitrary typedefsHolger Schurig
New typedefs are usually frowned upon. This patch changes libertas_adapter -> struct libertas_adapter libertas_priv -> struct libertas_priv While passing, make everything checkpatch.pl-clean that gets touches. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: configurable beacon intervalBrajesh Dave
Requires firmware version 5.110.19.p0 or newer, available here: http://dev.laptop.org/pub/firmware/libertas/ Signed-off-by: Ashish Shukla <ashishs@marvell.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: separate mesh connectivity from that of the main interfaceBrajesh Dave
The transmit and receive traffic as soon as the mesh interface is brought up. Test case 1: Bring up only the mesh interface and ping. No need for any iwconfig commands on the main interface. $ ifconfig msh0 192.168.5.3 $ iwconfig msh0 channel X $ ping 192.168.5.2 If ping succeeds, PASS Test case 2: Associate with the main interface, and turn off AP. Mesh interface should not lose connectivity. $ iwconfig eth0 mode managed essid "my_ssid" $ ifconfig msh0 192.168.5.3 $ ping 192.168.5.2 <turn off access point> If ping continues uninterrupted, PASS This feature requires firmware version 5.110.19.p0 or newer, available here: http://dev.laptop.org/pub/firmware/libertas/ Signed-off-by: Ashish Shukla <ashishs@marvell.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: move to uniform lbs_/LBS_ namespaceHolger Schurig
This patch unifies the namespace of variables, functions defines and structures. It does: - rename libertas_XXX to lbs_XXX - rename LIBERTAS_XXX to lbs_XXX - rename wlan_XXX to lbs_XXX - rename WLAN_XXX to LBS_XXX (but only those that were defined in libertas-local *.h files, e.g. not defines from net/ieee80211.h) While passing, I fixed some checkpatch.pl errors too. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: clean up scan debug messagesHolger Schurig
* make scan debug output cleaner * change some LBS_DEB_ASSOC messages to LBS_DEB_SCAN, which is more correct * move helper functions together * print function return value in the tracing code at one central location Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-By: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[PATCH] libertas: remove unused adhoc_rates_b definitionJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: advertise 11g ad-hoc ratesBrajesh Dave
Advertise support for 802.11g bitrates when starting adhoc networks, not just 802.11b bitrates. Signed-off-by: Brajesh Dave <brajeshd@marvell.com> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: better descriptions for association errorsDan Williams
Describe the association response status code the firmware returns, based on mail to libertas-dev from Ronak. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: revert CAPINFO_MASK to its original valueLuis Carlos Cobo
CAPINFO_MASK changed on commits 981f187b and a091095b. Reverting to the original value. Also move CAPINFO_MASK into the sole user, join.c. CAPINFO_MASK should be in host CPU byte order; capability is converted to device byte order elsewhere. This fixes OLPC ticket #2161 Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: send association events on adhoc reassociationDan Williams
Send association event to userspace when reassociating to the same ad-hoc network, because it's still an association. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->beaconperiodHolger Schurig
beaconperiod was initialized with MRVDRV_BEACON_INTERVAL, but there is no code that would ever change it's value. We can use the define directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->adhoc_grate_enabledHolger Schurig
The variable was initialized with 0 (false). There is no code that would ever change it, so we can use the false-patch directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->listenintervalHolger Schurig
listeninterval was initialized with MRVDRV_DEFAULT_LISTEN_INTERVAL, but there exists that would ever change it. So we can use this define directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->atimwindowHolger Schurig
This varaible was initialized with 0 but there is no code that would ever change it's value. So it can go away. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove a hundred CMD_RET_xxx definitionsHolger Schurig
types.h contains the same amount of CMD_RET_xxx and CMD_xxx definitions. They contains the same info: the firmware command opcode and, when the firmware sends back a result, the command opcode ORed with 0x8000. Having the same data twice in the source code is redundant and can lead to errors (e.g. if you update or delete only one instance). This patch removed all CMD_RET_xxx definitions and introduces a simple CMD_RET() macro. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: make the hex dumper nicerHolger Schurig
Currently, when you define LBS_DEB_HEX, you get every hex dump in the whole driver, e.g. for LBS_DEB_CMD, LBS_DEB_RX, LBS_DEB_TX etc. This patch makes sure that you only get the hexdump that you're interested in. Renamed lbs_dbg_hex() into lbs_deb_hex(), like the other lbs_deb_XXX() macros. Made lbs_deb_hex() issue a line feed (and a new prompt) after 16 bytes. As lbs_deb_hex() now prints the ":" after the prompt by itself, removed the misc colons in the various *.c files. lbs_deb_XXX() now print the debug category as well. As lbs_deb_XXX() --- and especially lbs_deb_11d() --- now print the category, I removed various "11D:" prefixes in 11d.c as well. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: access mesh_dev more carefullyHolger Schurig
The CF/SDIO firmware doesn't support Mesh, so priv->mesh_dev is NULL there. Protect all accesses. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: make more functions static & remove unused functionsHolger Schurig
Some functions where declared in header files, but used only once. They are now static functions. After doing this, I found out that some functions weren't used at all. I removed this dead code. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix one more sparse warningHolger Schurig
adhoc_rates_b is only used locally, so make it static Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: simplify and clean up data rate handlingDan Williams
Remove unused/duplicated fields and consolidate static data rate arrays, for example the libertas_supported_rates[] and datarates[] arrays in the bss_descriptor structure, and the libertas_supported_rates field in the wlan_adapter structure. Introduce libertas_fw_index_to_data_rate and libertas_data_rate_to_fw_index functions and use them everywhere firmware requires a rate index rather than a rate array. The firmware requires the 4 basic rates to have the MSB set, but most other stuff doesn't, like WEXT and mesh ioctls. Therefore, only set the MSB on basic rates when pushing rate arrays to firmware instead of doing a ton of (rate & 0x7f) everywhere. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix debug build breakage due to field renameDan Williams
Missed when fixing mixed-case structure field names. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: re-uppercase command defines and other constantsDan Williams
For readability. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix mixed-case abuse in cmd_ds_802_11_ad_hoc_startDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix mixed-case abuse in cmd_ds_802_11_ad_hoc_resultDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: kill ieeetypes_capinfo bitfield, use ieee80211.h typesDan Williams
Use standard BSS capability field constants from ieee80211.h. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: reduce SSID and BSSID mixed-case abuseDan Williams
Kill mixed case function names from scan.c/scan.h. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: remove structure WLAN_802_11_SSID and libertas_escape_essidDan Williams
Replace WLAN_802_11_SSID with direct 'ssid' and 'ssid_len' members like ieee80211. In the process, remove private libertas_escape_essid and depend on the ieee80211 implementation of escape_essid instead. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: fix big-endian associate command.David Woodhouse
Byte-swapping length fields and then passing them to memcpy() considered harmful. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: first pass at fixing up endianness issuesDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: add more verbose debugging to libertas_cmd_80211_authenticateDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: use MAC_FMT and MAC_ARG where appropriateDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: make association paths consistentDan Williams
The BSS to associate with (in either Infrastructure or IBSS join operations) is now stored in _one_ place in the association request (the bss member), not two places as before (pattemptedbss and curbssparams->bssdescriptor). Association requests are passed to the necessary association functions to (a) give them access to the bss member and (b) ensure that association/join/start setup uses settings from the request, not the current adapter settings (which may not be valid for the requested settings). Because the 'bss' member of the association request is used now, the command return functions from associate and adhoc join/start need access to the in-progress association request to update curbssparams when everything is done. The association worker moves the request from pending to in-progress for the duration of the association attempt. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: move channel changing into association frameworkDan Williams
Handle channel changes through the deferred association framework rather than directly. Fixes errors when setting channels along with other parameters like mode and SSID. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: replace 'macaddress' with 'bssid'Dan Williams
Start to normalize bss_descriptor with ieee80211_network so we can eventually replace bss_descriptor more easily. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: remove unused variables in wlan_dev_tHolger Schurig
Actually, this patch removev wlan_dev_t totally and puts the used variables of it directly into wlan_private. That reduces one level of indirection and looks a little bit simpler. It's now "priv->card" and not "priv->wlan_dev.card" and "priv->dev" instead of "priv->wlan_dev.netdev" Changed two occurences of "((wlan_private *) dev->priv)->wlan_dev.netdev" into "dev", because I didn't see the point in doing pointer-ping-pong. The variables "ioport", "upld_rcv" and "upld_type" where unused. They have been removed. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: fixed transmission flow control on the mesh interfaceJavier Cardona
This patch implements proper transmission flow control on mshX. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: make debug configurableHolger Schurig
The debug output of libertas was either not present or it was overwhelming. This patch adds the possibility to specify a bitmask for the area of interest. One should then only get the desired output. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-11[PATCH] libertas: 64-bit cleanupsDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-11[PATCH] libertas: Purge non-mesh ioctlsDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-11[PATCH] libertas: remove WLAN_802_11_NETWORK_INFRASTRUCTURE enumDan Williams
Use standard IW_MODE_* constants instead. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-11[PATCH] libertas: remove WLAN_802_11_WEP_STATUS enumDan Williams
Also change WEPstatus to "wep_enabled"; it's clearer and consistent with the WPAenabled and WPA2enabled members. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-11[PATCH] libertas: remove WLAN_802_11_AUTHENTICATION_MODEDan Williams
Remove WLAN_802_11_AUTHENTICATION_MODE enum and use IW_AUTH_ALG_* instead. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] Marvell Libertas 8388 802.11b/g USB driverMarcelo Tosatti
Add the Marvell Libertas 8388 802.11 USB driver. Signed-off-by: Marcelo Tosatti <marcelo@kvack.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-08 13:28:17 +0000