aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/libertas
AgeCommit message (Collapse)Author
2008-06-03libertas: rate adaptation configuration via iwconfig.Javier Cardona
Implemented rate adaptation support via 'iwconfig rate' API. It is now possible to specify a bit-rate value and append 'auto'. That will configure rate adaptation to use all bit-rates equal or lower than than selected value. Made lbs_cmd_802_11_rate_adapt_rateset a direct command. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: before sleeping, check for a command resultHolger Schurig
If we don't check for a command response early, but rather sleep, then we might sleep despite an already-received command response. This will lead to a command-timeout. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: use lbs_pr_XX instead of printkHolger Schurig
... because lbs_pr_XXX prefixes all messages with "libertas: " Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: speeds up downloading of CF firmwareHolger Schurig
Keep the timeout the same (1000*500 == 100000 * 5), but take shorter naps. Makes downloading the firmware slightly faster. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: don't spin_unlock_irq() twiceHolger Schurig
priv->driver_lock has already been unlocked some lines above. This patch fixes the sparse warning: drivers/net/wireless/libertas/main.c:792:6: warning: context problem in 'lbs_thread': '_spin_unlock_irq' expected different context drivers/net/wireless/libertas/main.c:792:6: context 'lock': wanted >= 1, got 0 Signed-of-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: provide reset_card() callback on OLPCDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-25Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/cpmac.c net/mac80211/mlme.c
2008-05-21libertas: reduce command retry timeHolger Schurig
[PATCH, take 2] libertas: reduce command retry time In the normal case, an unsuccessful command would be retried for 10*5 seconds, or 10*10 seconds in the worst case. This patch reduces this to 3*3 seconds, or 3*10 seconds in the worst case. I also reduced the time it takes to start a new command downloaded. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21libertas: sysfs interface for accessing default mesh channelJavier Cardona
This will create the following entry: /sys/class/net/mshX -- boot_options | |-- ... | `-- channel ... ... which I overlooked on my previous patch. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21libertas: Add reset_card() callback to hardware driverDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21libertas: sysfs interface for accessing non-volatile configurationJavier Cardona
This will create the following sysfs directories: /sys/class/net/mshX ... |-- boot_options | |-- bootflag | `-- boottime ... |-- mesh_ie | |-- capability | |-- mesh_id | |-- metric_id | `-- protocol_id Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21libertas: Extend MESH_CONFIG command to access non-volatile configurationJavier Cardona
This patch is based on a patch from Shailendra Govardhan and Brian Cavagnolo. It extends the MESH_CONFIG command to configure non-volatile parameters on libertas devices that support them (e.g. OLPC Active Antenna). This patch only implements the driver/firmware interface. See http://dev.laptop.org/ticket/6823 for minimal testing results and known issues. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21libertas: fix multicast filtering on eth and msh interfacesDavid Woodhouse
We weren't properly handling multicast on the mesh interface. Fix that, which involves setting up the hardware to use the union of dev->mc_list for both eth%d and msh%d devices. This means we can't do it directly from ->set_multicast_list() because we'd need to lock the other device to read its list, and we can't do that because it might deadlock. So punt the actual work to keventd. Also, invoke the same when taking an interface down; for some reason the core calls ->set_multicast_list while IFF_UP is still set in dev->flags when we're taking it down, so its addresses don't get removed then. We also convert MAC_MULTICAST_ADR to a direct command while we're at it, removing one more entry from the big switch statement in the deprecated lbs_prepare_and_send_command() function. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21libertas: Increase priority of 'unknown command' warningsDavid Woodhouse
Using the deprecated lbs_prepare_and_send_command() function for a command which it doesn't understand is an error; complain loudly about it even when we're not debugging. The mesh stats bug, where we converted MESH_ACCESS to a direct command but accidentally missed one user which was still trying to do it through lbs_prepare_and_send_command(), would have been caught a lot quicker if we'd done this sooner. Such bugs aren't entirely unlikely in future too, as we convert more code to stop using this function. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-20libertas: Fix ethtool statisticsDavid Woodhouse
Fix various problems: - We converted MESH_ACCESS to a direct command but missed this caller. - We were trying to access mesh stats even on meshless firmware. - We should really zero the buffer if something goes wrong. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-16wireless: Create 'device' symlink in sysfsMasakazu Mokuno
Some network interfaces of the wireless drivers lack the 'device' symlink in sysfs. This patch lets the drivers create the links. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-16libertas: fix command timeout after firmware failureBrian Cavagnolo
This is a fix for OLPC ticket #6586: "SCAN command fails, timer doesn't fire". In fact, the timer was firing; the problem was that the dnld_sent state variable was not being updated after the timer expired, so lbs_execute_next_command was not being called. Signed-off-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-14libertas: remove lbs_get_data_rate()Holger Schurig
lbs_get_data_rate() gets called, but no-one uses it's result. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-07libertas: allow removal of card at any timeHolger Schurig
This fixes several problems I had: * when removing the card while the card was scanning or associtating, it could happen that destroy_workqueue() stuck and didn't return. * make sure the command function doesn't run while we remove the list of pending commands * for still unknown reason, I had calls to lbs_stop_card() with priv==NULL Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-07libertas: make some functions voidHolger Schurig
They don't return anything meaningfull and no-one cares about their results. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-07libertas: debug output tweaks for lbs_threadHolger Schurig
* make debug output match the variable name * always report that lbs_remove_rtap() has has been exited Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-01Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-04-30libertas: fix use-before-check violationHolger Schurig
According to Coverity (kudo's to Adrian Bunk), we had one use-before-check bug in libe libertas driver. This patch fixes this issue. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-29wireless: use get/put_unaligned_* helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Michael Buesch <mb@bu3sch.de> Cc: Daniel Drake <dsd@gentoo.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-16libertas: un-garbage various command structsHolger Schurig
Some command structs contain reserved or unused fields, which the driver send uninitialized down to the card. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16libertas: convert libertas driver to use an event/cmdresp queueHolger Schurig
This patch (co-developed by Dan Williams and Holger Schurig) uses a kfifo object for events and a swapping buffer scheme for the command response to preserve the zero-copy semantics of the CF driver and keep memory usage low. The main thread should only ever touch the buffer indexed by priv->resp_idx, while the interface code is free to write to the second buffer, then swap priv->resp_idx under the driver spinlock. The firmware specs only permit one in-flight command, so there will only ever be one command response to process at a time. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/ehea/ehea_main.c drivers/net/wireless/iwlwifi/Kconfig drivers/net/wireless/rt2x00/rt61pci.c net/ipv4/inet_timewait_sock.c net/ipv6/raw.c net/mac80211/ieee80211_sta.c
2008-04-08libertas: remove lbs_get_fwversion()Holger Schurig
It was used only at one place anyway. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08libertas: move lbs_update_channel out of assoc.cHolger Schurig
... as it has nothing to do with pure association Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08libertas: move association code from scan.c into assoc.cHolger Schurig
Besides code moving, I did the following changes: * made some functions static * removed some unneeded #include's * made patch checkpatch.pl clean Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08libertas: move association code from join.c into scan.cHolger Schurig
Besides code moving, I did the following changes: * made some functions static * removed some unneeded #include's * made patch checkpatch.pl clean Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-07libertas: fix mode initialization problemHolger Schurig
After moving lbs_find_best_network_ssid() from scan.c to assoc.c gcc was able to deduce that new_mode might stay uninitialized. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-02Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/s2io.c
2008-04-01libertas: don't depend on IEEE80211Holger Schurig
Runtime-wise we only need escape_ssid from the deprecated IEEE80211 subsystem. However, it's easy to provide our own copy. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-01libertas: convert sleep/wake config direct commandsHolger Schurig
Confirm sleep event: they come very regularly, eventually several times per second. Therefore we want to send the config command as fast as possible. The old code pre-set the command in priv->lbs_ps_confirm_sleep. However, the byte sequence to be sent to the hardware is the same for all interfaces. So this patch make this an extern structure, initialized at module load time. Config wake event: normal conversion to a direct command. However, I don't know how to trigger a "HOST AWAKE" event from the firmware, so this part is untested. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-01libertas: convert CMD_802_11_EEPROM_ACCESS to a direct commandHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-01libertas: convert CMD_802_11_MAC_ADDRESS to a direct commandHolger Schurig
* directly call lbs_cmd_with_response() * only overwrite priv->current_addr once the firmware call succeeded Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-27libertas: reduce debug outputHolger Schurig
This patch tries to make dmesg logs between different runs easier to compare by * removing the jiffies (use CONFIG_PRINTK_TIME if you need timing) * remove the line numbers, they change with each applied patch It also changes the deprecated __FUNCTION__ to __func__ to make checkpatch.pl happy. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-27libertas: remove CMD_802_11_PWR_CFGHolger Schurig
This has nowhere been used. Note: in the firmware manual this was documented as CMD_802_11_PA_CFG. If we ever need it, we can/should re-implement it as a direct command. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-27libertas: kill useless #define LBS_MONITOR_OFF 0Holger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-27libertas: fix spinlock recursion bugHolger Schurig
This fixes a bug detected by CONFIG_DEBUG_SPINLOCK: if_cs_get_int_status() is only called from lbs_thread(), via priv->hw_get_int_status. However, lbs_thread() has already taken the priv->driver_lock. So it's a fault to take the same lock again here. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: store rssi as an u32Holger Schurig
Don't store an (hardware base) u8 value in bss_descriptor, but just an unsigned int (RSSI is really unsigned). Compilers generate more efficent code for ints than for bytes. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: remove lots of unused stuffHolger Schurig
This removes many unused function parameters as well as some not-implemented functions, e.g. CMD_802_11_GET_STATS. The silly lbs_set_cmd_ctrl_node() function is now also gone. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: misc power saving adjustsHolger Schurig
* firmware for the CF card supports power saving * the driver currenly only accept "iwconfig ethX power on|off", so I fixed what the range wext ioctl reports. * initialize value/flags in lbs_get_power() * get rid of unused parameter psmode in lbs_ps_confirm_sleep() * some minor debug output tweaks Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: convert GET_LOG to a direct commandHolger Schurig
Now uses __lbs_cmd() to get the "log" (it's actually more a snapshot of various counters, not a sequential log). Besides the "mechanical" convertion the patch add the following logical changes: * Removes the priv->logmsg variable, it was only used in one place anyway, also don't blindly get the counters when associating. Getting the counters then the user asks via WEXT for them is good enought. * don't set wstats.discard.fragment with log.rxfrag, because the latter is a counter for successfully received packets, not for fragmented packets. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: fix scheduling while atomic bug in CMD_MAC_CONTROLHolger Schurig
The old code incorrectly used lbs_cmd_with_response() and now uses lbs_cmd_async(). While there I noticed that there is no real useful return values for asynchronous command functions, so I made the function "void". Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: make a handy lbs_cmd_async() commandHolger Schurig
This uses a static lbs_cmd_async_callback function, which is a noop. Just setting the callback argument to __lbs_cmd_async() to NULL won't work, because then the cmdnode wouldn't be released. This also makes __lbs_cmd_async() a static method, which is now only used by lbs_cmd() and lbs_cmd_async(). Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: remove some unused commandsHolger Schurig
Neither CMD_802_11_PAIRWISE_TSC nor CMD_802_11_GROUP_TSC is used or documented. It might have something to do with TKIP sequence counters, but that's just an educated guess. Remove all occurences of them. CMD_CODE_DNLD is also neither used nor documented. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: rename packetfilter to mac_controlHolger Schurig
The CMD_MAC_CONTROL can be used for other things than just filtering packets, e.g. to enable and disable WMM. This uses the same term mac_control for the define, the function and the shadow value in struct lbs_private. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: convert CMD_MAC_CONTROL to a direct commandHolger Schurig
convert CMD_MAC_CONTROL to a direct command Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-20 10:44:22 +0000