aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/p54
AgeCommit message (Collapse)Author
2009-07-08p54: tx refused but queue activeLarry Finger
In the mainline kernel, p54usb will fail because the TX queue length can become < 0. This problem has been reported as Bugzilla #13725. The failure is expressed by the following message in the logs: WARNING: at net/mac80211/tx.c:1325 ieee80211_tx+0x23c/0x298 [mac80211]() Hardware name: HP Pavilion dv2700 Notebook PC tx refused but queue active This problem has been recently observed in the wireless-testing tree, where a full solution is being tested. That fix is too invasive for 2.6.31-rcX, but the simple change supplied here will prevent the failure. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-06Revert "p54: Use SKB list handling helpers instead of by-hand code."David S. Miller
This reverts commit a1091aae19b1d9c85d91c86915a611387f67a26b.
2009-06-03wireless/p54: prepare for FIRMWARE_NAME_MAX removalSamuel Ortiz
We're going to remove the FIRMWARE_NAME_MAX definition in order to avoid any firmware name length restriction. This patch gets rid of the statically allocated p54usb firmware string, and replaces them with const char pointers. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-28p54: Use SKB list handling helpers instead of by-hand code.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-20p54spi: drop test for FW_STATE_RESET in p54spi_workMax Filippov
Drop test for FW_STATE_RESET in p54spi_work as fw_state is never assigned this value. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20p54spi: use firmware/DMA bug workaround that work under hight load in p54spi_rxMax Filippov
Under high load first data word, read after available data size is sometimes lost in p54spi_rx. It seems to depend on frequency of interrupts and latency of data read request relatively to 'data available' interrupt. The worst consequence of this bug is loss of packet transmission acknowledgement, which in turn causes overflow of tx queues and permanent link loss. Read data size and first data word in one SPI transaction. No packets from LMAC should have length less than 1 word, so this shouldn't interfere with the next read transaction. Also call p54spi_sleep if p54spi_wake succeeded. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20p54spi: always call p54spi_sleep in p54spi_tx_frame if p54spi_wakeup succeededMax Filippov
Put chip into sleep state, once it's been awaken. Also, propagate error code to the caller. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20p54spi: return status of p54spi_wakeupMax Filippov
Return whether wakeup operation succeeded. Make use of this return value. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20p54spi: cosmetic fixes: use even byte count in SPI write; drop unused ↵Max Filippov
interrupt status read When SPI write of odd length is requested, p54spi_write splits it into two parts: one for all data, except the last byte, and one for last byte and padding byte. Unfortunately, the length of first part is not amended. It works because all meaningful bytes have proper value and the last byte of odd length SPI write transaction is ignored. p54spi_work has dummy HOST_INTERRUPTS register read at the end. Drop it, as its result is not used and it has no side effects. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20p54spi: fix incorrect access sequence to DMA_WRITE_CTRL in p54spi_spi_write_dmaMax Filippov
Host is not allowed to modify DMA_WRITE_CTRL register if bit HOST_ALLOWED in it is not set. Wait for HOST_ALLOWED first. Also get rid of timeout in p54spi_wait_bit as it's been playing a role of workaround for such an incorrect register access. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/scsi/fcoe/fcoe.c
2009-05-06p54: call p54_wake_free_queues on every p54_free_skb and p54_rx_frame_sentMax Filippov
Currently queues are stopped when their length reaches their length limit, but are restarted only when the size of freed range of packet buffer is not less than the size of the largest possible packet. This causes permanent queue stop on radio visibility loss in the middle of ping series: there is plenty of room in the packet buffer, but it is never freed more than 3 (size of 'best effort' queue) * 288 (ping packet plus headers) bytes at once. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-06p54: correct merge damage from "p54: more SoftLED updates"John W. Linville
Ooops... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-06p54usb: Fixes compile error with CONFIG_PM=nHauke Mehrtens
/drivers/net/wireless/p54/p54usb.c: In function 'p54u_probe': /drivers/net/wireless/p54/p54usb.c:923: error: 'struct usb_device' has no member named 'reset_resume' In the struct usb_device the reset_resume attribute is only available when CONFIG_PM is defined. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-06p54usb: rework driver for resumeChristian Lamparter
This patch redo the driver code so that p54usb no longer hangs the kernel on resume. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-06p54usb: remove some dead codeChristian Lamparter
Since "p54: prevent upload of wrong firmwares" we no longer allow outdated LM86 firmwares to be uploaded on ISL3887 (LM87) devices. Therefore we can purge this buggy legacy code altogether. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-06mac80211: unify config_interface and bss_info_changedJohannes Berg
The config_interface method is a little strange, it contains the BSSID and beacon updates, while bss_info_changed contains most other BSS information for each interface. This patch removes config_interface and rolls all the information it previously passed to drivers into bss_info_changed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (94 commits) netfilter: ctnetlink: fix gcc warning during compilation net/netrom: Fix socket locking netlabel: Always remove the correct address selector ucc_geth.c: Fix upsmr setting in RMII mode 8139too: fix HW initial flow af_iucv: Fix race when queuing incoming iucv messages af_iucv: Test additional sk states in iucv_sock_shutdown af_iucv: Reject incoming msgs if RECV_SHUTDOWN is set af_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flag af_iucv: consider state IUCV_CLOSING when closing a socket iwlwifi: DMA fixes iwlwifi: add debugging for TX path mwl8: fix build warning. mac80211: fix alignment calculation bug mac80211: do not print WARN if config interface iwl3945: use cancel_delayed_work_sync to cancel rfkill_poll iwlwifi: fix EEPROM validation mask to include OTP only devices atmel: fix netdev ops conversion pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM mlx4_en: Fix cleanup if workqueue create in mlx4_en_add() fails ...
2009-04-22p54: fix ps-poll delivery in ap modeChristian Lamparter
PS-Polled frames must be sent with OUT_NOCANCEL flag set, or the firmware will reject all of them, at the station is still blacklisted. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: deactivate broken powersave function (part 2)Christian Lamparter
This patch deactivates powersave in station mode. It does not work correctly yet, so the code does more harm than good. (I split the original patch and sent part of it for 2.6.30, which didn't have the IEEE80211_HW_BEACON_FILTER flag. -- JWL) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: remove module_ stubsChristian Lamparter
Christoph Hellwig pointed out that these stubs are unnecessary. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: remove obsolet signal quality calculationChristian Lamparter
The signal quality percentage is now calculated by mac80211 stack. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: utilize all available key slots for decryption offloadChristian Lamparter
This patch takes care of outstanding TODOs: /* TODO: some devices have 4 more free slots for rx keys */ Now the driver can utilize all available key slots instead of just 4. Obviously, this helps most in AP/IBSS(/MESH) mode, when we have to use more different keys. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: get rid of busy-wait loopsMax Filippov
p54spi_wakeup and p54spi_tx_frame used busy-waiting loop to poll for 'ready' bits in SPI_ADRS_HOST_INTERRUPTS register. With this change in place 'WR_READY timeout' messages do not show anymore. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: add beacon filtering supportChristian Lamparter
This patch adds beacon filtering support to p54. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: more SoftLED updatesChristian Lamparter
This patch hopefully finishes the SoftLED code: - It adds two more LEDs (rx and radio). (the FW claims it can support up to 16 LEDs, but I doubt that any vendor put more than 4 on a board) - update the LEDs in a _delayed_ workqueue. No one reported any more crashes. (see: "PATCH] p54: fix race condition in memory management") So we can stop burning the mm code. Signed-off-by: Christian Lamparter <chunkeey@web.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: clean up p54.h's struct p54_commonChristian Lamparter
This patch rearrange and regroups most elements in p54_common. Signed-off-by: Christian Lamparter <chunkeey@web.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: compensate firmware alignment bug in p54spi_rxMax Filippov
Firmware may insert up to 4 padding bytes after the lmac header, but it does not amend the size of SPI data transfer. Such packets has correct data size in header, thus referencing past the end of allocated skb. Put extra 4 bytes to the end of the received skb to compensate for this case. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: fix p54spi_tx_frame DMA transfer initiation and skb cleanupMax Filippov
p54spi_tx_frame wasn't waiting for HOST_ALLOWED in SPI_ADRS_DMA_WRITE_CTRL. This resulted in frequent 'WR_READY timeout' on beacon resubmission. Also don't free skb on error path, as it gets freed on p54spi_wq_tx. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: fix p54spi_upload_firmwareMax Filippov
Instead of firmware itself p54_upload_firmware was sending to the device content of struct firmware and the following random garbage. Notice '&' before priv->firmware->data at p54spi_spi_write. But simple removing of '&' sign triggered BUG_ON at dma_cache_maint. Thus kmemdup - kfree workaround. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: mask value read from SPI_ADRS_DMA_WRITE_CTRL in p54spi_wait_bitMax Filippov
Mask value read from SPI_ADRS_DMA_WRITE_CTRL in p54spi_wait_bit. Without this, 'fw_upload not allowed to DMA write' is observed at both N800 and N810. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-20p54: deactivate broken powersave functionChristian Lamparter
This patch deactivates powersave in station mode. It does not work correctly yet, so the code does more harm than good. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-16p54usb: add Telsey 802.11g USB2.0 AdapterChristian Lamparter
Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-16p54spi: fix locking warning in p54spi_op_txChristian Lamparter
This patch fixes the following waring: > ------------[ cut here ]------------ >WARNING: at kernel/softirq.c:138 local_bh_enable+0x54/0xbc() >Modules linked in: p54spi >[<c0034ff8>] (dump_stack+0x0/0x14) >[<c005b1a4>] (warn_on_slowpath+0x0/0x68) >[<c00604c8>] (local_bh_enable+0x0/0xbc) >[<bf000000>] (p54spi_op_tx+0x0/0x4c [p54spi]) >[<c01a4d34>] (p54_sta_unlock+0x0/0x78) p54spi_op_tx needs to be called from different locking contexts. Therefore we have to protect the linked list with irqsave spinlocks. Reported-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-16p54: replace MAC80211_LEDS with P54_LEDS in p54.hChristian Lamparter
I'm very sorry, as this change belongs to the other patch: "[PATCH] p54: fix SoftLED compile dependencies". however I must have somehow lost "git add" for that file. Signed-off-by: Christian Lamparter <chunkeey@web.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-13Replace all DMA_nBIT_MASK macro with DMA_BIT_MASK(n)Yang Hongyang
This is the second go through of the old DMA_nBIT_MASK macro,and there're not so many of them left,so I put them into one patch.I hope this is the last round. After this the definition of the old DMA_nBIT_MASK macro could be removed. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Greg KH <greg@kroah.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-27p54: Kconfig maintenanceChristian Lamparter
This patch updates p54's Kconfig entry and removes the out-dated device list. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27p54: fix SoftLED compile dependenciesChristian Lamparter
This patch fixes a compile problem when the MAC80211_LEDS triggers are enabled but not LED class itself. (which is sort of pointless, but anyway...) Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27wireless/p54: P54_SPI should depend on GENERIC_HARDIRQSGeert Uytterhoeven
m68k allmodconfig: | drivers/net/wireless/p54/p54spi.c: In function 'p54spi_probe': | drivers/net/wireless/p54/p54spi.c:675: error: implicit declaration of function | 'set_irq_type' | make[4]: *** [drivers/net/wireless/p54/p54spi.o] Error 1 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54: completely ignore rx'd frames with bad FCSChristian Lamparter
Passing frames with a bad FCS to the user is an optional feature. However it doesn't work reliable and strangely not in the native monitor mode?! Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54: enable power save supportChristian Lamparter
This patch enables power save support on all p54 devices. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54: initial SoftLED supportChristian Lamparter
This patch adds SoftLED support for all p54 devices. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54: fix iwconfig txpower offChristian Lamparter
Disabling the receiver logic with P54_FILTER_TYPE_RX_DISABLED is not supported by all firmwares. However we have an alternative: hibernation. And the only side effect - so far - is a bit less power consumption. WIN! Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54pci: convert printk(KERN_* to dev_*Christian Lamparter
This patch replaces most printk(KERN_* "") with their by dev_* analogue. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54: unify ieee80211 device registrationChristian Lamparter
All three drivers (p54pci, p54usb and p54spi) are implementing the same functionality three times. So, why not put it into the shared library?! Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54usb: stop USB core interference in exit pathChristian Lamparter
The patch fixes a problem when the (Soft)LED stayed on after the module was unloaded. It turned out that the USB core disables all endpoints before calling the disconnect method. So it was impossible to switch off the radio & LEDs. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-10Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x_main.c drivers/net/wireless/iwlwifi/iwl3945-base.c drivers/net/wireless/rt2x00/rt73usb.c
2009-03-06p54: fix race condition in memory managementChristian Lamparter
This patch fixes a number of race conditions in the driver. Up until now, "entry" pointer was initialized before acquiring the right lock. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27p54: misplaced parenthesesRoel Kluin
Only FIF_FCSFAIL is set due to parentheses Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29wireless: restrict to 32 legacy ratesJohannes Berg
Since the standards only define 12 legacy rates, 32 is certainly a sane upper limit and we don't need to use u64 everywhere. Add sanity checking that no more than 32 rates are registered and change the variables to u32 throughout. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>