aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00
AgeCommit message (Collapse)Author
2008-01-28rt2x00: correct "skb_buff" typoJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28rt2x00: Release rt2x00 2.0.13Ivo van Doorn
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28rt2x00: Cleanup rfkillIvo van Doorn
The label exit_free_polldev is no longer used and can be removed. input_free_polled_device() also calls input_free_device(), so don't call it seperatly. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28rt2x00: Remove redundant code in rfkill setupLarry Finger
In rt2x00rfkill.c, routine input_allocate_device() is called even though input_allocate_polled_device(), which was just called, includes a call to that routine. This patch, which has not been tested, removes the redundant code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28rt2x00: Only update rssi average approximation on receiving beacon frames.Mattias Nissler
Restrict rssi average updating to beacon frames of the bssid the interface is associated with. Without this restriction, strong signals belonging to other BSS, e.g. beacon frames coming from a nearby AP, would cause incorrectly high rssi approximation values. This would then cause the link tuner to reduce sensitivity, resulting in transmissions from the BSS associated to to be missed. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28rt2x00: Use IEEE80211_IF_TYPE_INVALID directlyIvo van Doorn
No need to use a seperate define INVALID_INTERFACE while we can use IEEE80211_IF_TYPE_INVALID directly. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28rt2x00: Add TX/RX frame dumping facilityIvo van Doorn
This adds TX/RX frame dumping capabilities through debugfs. The intention is that with this approach debugging of rt2x00 is simplified since _all_ frames going in and out of the device are send to debugfs as well along with additional information like the hardware descriptor. Based on the patch by Mattias Nissler. Mattias also has some tools that will make the dumped frames available to wireshark: http://www-user.rhrk.uni-kl.de/~nissler/rt2x00/ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28rt2x00: Add skb descriptorIvo van Doorn
Use the skb->cb field to add a frame description that can be used to transfer information passed each rt2x00 layer. This reduces the required arguments for rt2x00lib_write_tx_desc(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Add chipset version to chipset debugfs entryIvo van Doorn
The chipset debugfs entry already indicates it is about the chipset, it only makes sense to also display the chipset version in there. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28rt2x00: Move register value/offset files into new folderIvo van Doorn
Cleanup debugfs interface by moving the csr/bbp/rf/eeprom value/offset entries into the "register" folder. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28rt2x00: Extend PLCP descriptor definition for rt2400pciIvo van Doorn
Extend word field definitions for the PLCP words in the TX descriptor to contain the BBP fields as well. This will remove rt2400pci_write_tx_desc() from the checkstack script. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28rt2x00: Replace DRV_NAME with KBUILD_MODNAMEIvo van Doorn
DRV_NAME was always set to the KBUILD_MODNAME value, lets clean everything up by removing DRV_NAME and just use KBUILD_MODNAME directly. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28rt2x00: Move duplicate code into rt2x00pci_txdone()Ivo van Doorn
rt2400pci, rt2500pci and rt61 require different txdone handling, but the code that pushes the frame upstream and cleans up the entry is identical to all of them. This will create the function rt2x00pci_txdone() to remove the duplicate code. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28rt2x00: Release rt2x00 2.0.12Ivo van Doorn
Version bump. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Correctly set ACK bit in tx descriptorsMattias Nissler
Add a flag to struct txdata_entry_desc that specifies whether an ack for the frame is to be expected. Use this flag to set the ACK bit in the tx descriptor. Previously, the ACK bit could be set incorrectly on CTS-to-self frames, so they caused retries and were reported to be failed in the txdone handlers. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Place mutex around USB register accessAdam Baker
There is a buffer, csr_cache which is used to hold copies of data being passed to the USB stack which can get corrupted if multiple threads attempt to access CSR registers simultaneously. There is also the possibility if multiple threads try to access BBP or RF registers for the multiple USB operations needed to get interleaved leading to incorrect results. This patch introduces a mutex to prevent such simultaneous access. The interleaved access problem may also affect the PCI devices but if so that will be handled in a follow-up patch. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Remove data_desc structureIvo van Doorn
Coverty indicated that data_desc with a single element array is bad coding style. This removes the structure and forces everybody to use __le32. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Rework rt73 antenna selectionMattias Nissler
This patch changes rt73 antenna selection to what I believe is the correct way. It also fixes a small selection bug that switched the antennas by accident. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Remove unused variablesIvo van Doorn
With the updated antenna setup the following variables are no longer used. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Rework rt61 antenna selection.Mattias Nissler
This patch changes rt61 antenna selection again. It helps at least with the rt61 pci card in my box, I hope I haven't broken behaviour on other RF chips. RF 2529 antenna setup is incomplete, we need to at code for diversity when we figure out how it is done properly. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Unconstify rt2x00devAdam Baker
Some register accesses need rt2x00dev to be non-const they all need modifying so the prototype is consistent. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Detect initial rfkill state on registerIvo van Doorn
When registering rfkill, make sure a initial poll event is directly executed to detect the initial rfkill state and send the event to the rfkill layer. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Input-polldev requires input deviceIvo van Doorn
input-polldev requires a correctly allocated and initialized input device to be set for the input_polled_dev->input field. Failure to do that will prevent correct polling of the device. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Split rt61/rt73 antenna selection into RX and TX antennaIvo van Doorn
Based on investigation of the legacy drivers, I have made the following assumptions of the antenna setup: - R77 is the TX antenna configuration - RF2529 fetches default antenna selection from NIC eeprom word With these assumptions we can change the antenna configuration to correctly read both antenna setup values and correctly configure the antenna. And we can now also configure the antenna for RF2529 without a double antenna. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Disable RX when switching antennaIvo van Doorn
Antenna switching will be ignored when RX is enabled during the switch. Make sure we disable the RX during the switch and don't forget to reenable it later. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Release rt2x00 2.0.11Ivo van Doorn
Version bump. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Fix antenna selection.Mattias Nissler
In the config() handler, make sure that we do configure an antenna if the current active antenna is uninitialized. Furthermore, don't overwrite the active antenna with bogus values if we didn't touch the antenna setup. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Cleanup if-statementsIvo van Doorn
Cleanup if-statements for simple 1/0 register field values. This also fixes a endian bug in rt2500usb when working with the PHY_CSR2 initialization. As well as a bug in the enabling of the LED in rt73usb. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Implement SW diversityIvo van Doorn
When mac80211 indicates that the default antenna setup should be used _and_ that this default setup is SW_DIVERSITY. This requires sampling and storing the RSSI per antenna and check once every 2 seconds to determine if the RSSI has changed significantly. Once this is the case we should sample the other antenna for a short period and evaluate if we need to swap antenna or not. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Remove rt2x00_clear_linkIvo van Doorn
rt2x00_clear_link() was becoming too large for statically inline, also it was used on a single location and shouldn't really be used anywhere else. So move the entire code into the function rt2x00lib_start_link_tuner() Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: SW diversity should default to antenna BIvo van Doorn
Although ANTENNA_SW_DIVERSITY should never be send to the driver, we should still handle it to prevent bugs. But instead of defaulting to ANTENNA_HW_DIVERSITY we should default to ANTENNA_B instead. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Correctly translate mac80211 antenna setup to rt2x00Ivo van Doorn
mac80211 has 3 values for the antenna setup: 0 - default 1 - use antenna 1 2 - use antenna 2 This means that rt2x00 should store the default value from the EEPROM somwhere and use that when mac80211 indicates that the antenna setup is 0. This also implies that rt2x00 should no longer write the hw->config.antenna_sel_* values based on the EEPROM input. This also adds the basis in rt2x00lib for correct software diversity handling. By default rt2x00lib will now configure antenna B instead of hardware diversity. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Use enum definesIvo van Doorn
When setting the default EEPROM values use the values from the enums instead of "magic" values. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Move quality statistics into seperate structureIvo van Doorn
Move all link quality statistics variables into the link_qual structure. This cleans up the link structure and allows us to use it for more then just statistics. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-16rt2x00: Fix ieee80211 payload alignmentIvo van Doorn
As Johannes Berg indicated, the NET_IP_ALIGN doesn't need to be used for ieee80211 frames. This means we can simplify the alignment calculation to just use the result of the header size modulus 4 as frame alignment. Furthermore we shouldn't use NET_IP_ALIGN in rt2x00usb because it could be 0 on some architectures and we absolutely need to have 2 bytes reserved for possible aligning. Signed-off-by: Ivo van Doorn<IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-10rt2x00: Put 802.11 data on 4 byte boundaryIvo van Doorn
Check the size of the ieee80211 header during rxdone and make sure the data behind the ieee80211 header is placed on a 4 byte boundary. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-10rt2x00: Corectly initialize rt2500usb MACIvo van Doorn
mac is a pointer, obviously we shouldn't use the address of a pointer as MAC address. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-10rt2x00: Allow rt61 to catch up after a missing tx reportMattias Nissler
Sometimes it happens in the tx path that an entry given to the hardware isn't reported in the txdone handler. This ultimately led to the dreaded "non-free entry in the non-full queue" message and the stopping of the tx queue. Work around this issue by allowing the driver to also clear out previos entries in the txdone handler. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-18rt2x00: Request usb_maxpacket() onceIvo van Doorn
The usb max packet size won't change during the device's presence. We should store it in a variable inside rt2x00dev and use that. This should also fix a division error when the device is being hot-unplugged while a frame is being send out. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-14Merge branch 'fixes-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2007-11-14rt2x00: Fix chipset revision validationIvo van Doorn
The validation of the chipset revision was broken since for rt2500usb and rt73usb different registers should be read. When rt2500usb was loaded for a rt73 device it would false think the chipset was correct because the wrong register was read and validated. This has been fixed by expanding the check to also see if the first 4 bits of the revision is not-0 (When reading the wrong register offset the returned value is usually 0 which can be interpreted as invalid) Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10rt2x00: Block adhoc & master modeIvo van Doorn
rt2x00 is broken when it comes down to adhoc and master mode. The main problem is the beaconing, which is completely failing. Untill a solution has been found, both beacon requiring modes must be disabled to prevent numerous bug reports. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-25[PATCH] rt2x00: jiffies_round -> jiffies_round_relativeAnton Blanchard
When rounding a relative timeout we need to use round_jiffies_relative(). Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-18[PATCH] rt2x00: Add new rt73usb USB IDIvo van Doorn
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-18[PATCH] rt2x00: Fix residual check in PLCP calculations.Mattias Nissler
Because rt2x00 implements the residual calculation different from what the legacy code does (i.e. scaled values), we need to adjust the residual check. Again, we are only mimicking the behaviour of the ralink driver without actually knowing what we do :-( Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] rt2x00: Release 2.0.10Ivo van Doorn
Version bump Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] rt2x00: Allways memset memory obtained from skb_push()Ivo van Doorn
When skb_push() is used we should memset the memory before usage. This will prevent bugs which could occur when the data is treated as TX descriptor. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] rt2x00: Clean disabling of rt73usb_get_tsfIvo van Doorn
By defining rt73usb_get_tsf to NULL we only have 1 location that needs to be edited when rt73usb_get_tsf can be enabled again. This also reduces the number of #ifdefs in the code which is also a "good thing" Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] rt2x00: Reorganize configuration handlerIvo van Doorn
Reorganize configuration handling by creating a extra structure which contains precalculated values based on the mac80211 values which are usefull for all individual drivers. This also fixes the preamble configuration problem, up untill now preamble was never configured since by default the rate->val value was used when changing the mode. Now rate->val will only be used to set the basic rate mask. The preamble configuration will now be done correctly through the erp_ie_changed callback function. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] rt2x00: Small optimizationsIvo van Doorn
Make some small optimizations by removing some simple if-statements. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 10:56:09 +0000