aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/wl12xx
AgeCommit message (Collapse)Author
2010-02-08wl1251: fix txop unitKalle Valo
mac80211 uses unit units of 32 usec with txop but wl1251_acx_ac_cfg() expects it to be usecs. This fortunately didn't cause any severe problems, only that firmware was using incorrect WMM settings. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-26mac80211: wait for beacon before enabling powersaveJohannes Berg
Because DTIM information is required for powersave but is only conveyed in beacons, wait for a beacon before enabling powersave, and change the way the information is conveyed to the driver accordingly. mwl8k doesn't currently seem to implement PS but requires the DTIM period in a different way; after talking to Lennert we agreed to just have mwl8k do the parsing itself in the finalize_join work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-14wl1271: remove unused flagsLuis R. Rodriguez
These are unused and as with a previous patch 5ef5da for wl1251 this removes some other unused flags. the IRQ_MASK specifically conflicts with include/pcmcia/cs.h when using compat-wireless. Cc: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12wl1251: add U-APSD supportKalle Valo
wl1251 firmware supports U-APSD just with a simple queue configuration change so enable it. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12wl1251: create qos null data templateKalle Valo
The qos null data template is needed for U-APSD. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12wl1251: fix sleep related error paths in wl1251_op_bss_info_changed()Kalle Valo
In various cases wl1251_op_bss_info_changed() did not call elp_sleep() after an error was noticed. Fix it by using correct goto label. The bug was a theoretical one, in practise it doesn't matter because if commands start returning errors there will be lots of other problems. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12wl1251: use mac80211 provided channel parameters in scanningKalle Valo
The number of channels to be used in scan was hard coded in wl1251. The proper way is to use the channels array provided by mac80211. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12wl1251: get probe request template from mac80211Kalle Valo
Instead of creating the template in driver, get it from mac80211 instead. Thanks to this, three functions can be now removed. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12wl1251: cleanup scanning codeKalle Valo
The current scanning code wasn't following the preferred style. Move code related to scan and trigger scan to commans to wl1251_cmd.c. Because there's now less code in wl1251_hw_scan(), the function can be now merged with wl1251_op_hw_scan(). Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12wl1251: get PS Poll and Nullfunc templates from mac80211Kalle Valo
Now that mac80211 creates templates for PS Poll and Nullfunc frames, use them instead of creating our own. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-04wl1271: fix timeout in wl1271_top_reg_readJuha Leppanen
I noticed a timeout bug in /drivers/net/wireless/wl12xx/wl1271_spi.c In the current code you cannot tell why you exited the "poll for data ready" do-while loop if exiting was done after the last possible loop. Then timeout==0 regardless of (val & OCP_READY_MASK) or !(val & OCP_READY_MASK), leading to possible false timeout... Simple correction could be decreasing timeout after checking for !(val & OCP_READY_MASK), not before (Manually converted from email to an actual patch by me. -- JWL) Reported-by: "Juha Leppanen" <juha_motorsportcom@luukku.com> Signed-off-by: "Juha Leppanen" <juha_motorsportcom@luukku.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville
Conflicts: drivers/net/wireless/libertas/scan.c
2009-12-28mac80211: remove struct ieee80211_if_init_confJohannes Berg
All its members (vif, mac_addr, type) are now available in the vif struct directly, so we can pass that instead of the conf struct. I generated this patch (except the mac80211 and header file changes) with this semantic patch: @@ identifier conf, fn, hw; type tp; @@ tp fn(struct ieee80211_hw *hw, -struct ieee80211_if_init_conf *conf) +struct ieee80211_vif *vif) { <... ( -conf->type +vif->type | -conf->mac_addr +vif->addr | -conf->vif +vif ) ...> } Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Prevent performing "join" before associationJuuso Oikarinen
There is a minor bug in the code causing a "join" to be performed before there is an intention to associate. Fix this. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Check vif for NULL when indicating beacon-lossJuuso Oikarinen
Because the interface is started and the vif are created and destroyed separately, there is a slim possibility beacon-loss indications occur while there is no vif - causing a kernel-oops unless checked. Add checking for the vif. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Add support for acx_pm_configJuuso Oikarinen
This acx configures host clock parameters in correspondence with the clock request line - the settling time of the clock, and whether fast wake-up is supported. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Change booleans in struct wl1271 into a flags bitmaskJuuso Oikarinen
For cleaner implementation, change the bunch of booleans in the struct wl1271 structure into a flags bitmask. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Fix supported rate managementJuuso Oikarinen
Previously, only basic rates were used for data transmission - resulting in reduced transfer rates. This patch takes enables the firmware to take advantage of the full set of data rates supported by the AP. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Change rates configured for templatesJuuso Oikarinen
Previously a "firmware chooses" value was used for the rates of all control message templates set to the firmware. This resulted in a too high rate to be chosen to transmit those messages. Change this by configuring a fixed low rate for the templates. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Add rudimentary ad-hoc supportJuuso Oikarinen
This patch adds rudimentary a-hoc support for the driver. It will allow setting up ad-hoc, and for other devices to scan and join. The beacon and probe response template setting is slightly dirty, and need to be properly implemented with support from mac80211. Also, the SSID is not configured to the firmware - the FW will not be able to respond to probe requests autonomously. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Remove beacon-loss-ind from PSM entry failure handlingJuuso Oikarinen
Remove the beacon-loss indication to stack from PSM entry failure handling - this will cause more problems than it will solve due to the design of the mac80211. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Add pre-power-on sleepJuuso Oikarinen
This patch adds a short delay before powering on the wl1271. Normally, it is not needed, but if the wl1271 has been powered off shortly before, for reliable firmware-booting this small stabilization delay is required. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Implement chipset boot retryJuuso Oikarinen
The wl1271 has a hardware bug which causes it to randomly (very infrequently) to fail powering up properly. This patch implements retry for the chipset boot sequence, to work around the hardware problem. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: prevent power save entry while not associatedJuuso Oikarinen
The mac80211 sometimes requests power save entry while not associated - this will cause problems, so prevent it if not associated. Go to powersave once association is complete. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Fix event acknowledging functionalityJuuso Oikarinen
In reference source, events are acknowledged separately - fix the driver to do the same. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Use slow rates for association messagesJuuso Oikarinen
While not associated, default the data rates to 1 and 2mbps, so that only those rates will be used for association related message transfer. Once associated, configure the full rate-set supported by the AP. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Remove smart reflex ACXJuuso Oikarinen
Remove the smart-reflex ACX - the associated parameters are now configured in the radio parameters config. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Configure smart-reflex paramter values.Juuso Oikarinen
Configure correct values to be used with the smart-reflex configuration of the firmware. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: use channel 1 when configuring the data pathLuciano Coelho
In the data path configuration, one of the parameters is the channel. We have been setting it to wl->channel, which is not correct in this case. This channel has nothing to do with the channel we're currently tuned to, since it is only used for calibration during this phase. Hardcoded the channel to 1, according to the reference driver. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: some new configuration values according to new referenceLuciano Coelho
In the new reference driver, some of the firmware configuration values have been changed. This patch changes them in the wl1271 driver accordingly. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: upload only the first 468 bytes from the NVS fileLuciano Coelho
We were uploading the whole NVS file, but that is wrong, because the same file also contains the initialization values. For the latest firmwares, we should upload only the initial 468 bytes from the file. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: add gpio_power file in debugfs to power the chip on and offLuciano Coelho
Some debugging tools require the chip to be powered on before they can work. With these tools, we shouldn't upload the firmware nor boot the firmware ourselves, so this debufs file is provided. It always contains the gpio power setting (0 = off, 1 = on). To change the power setting, just write 0 or 1 to the file. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: fix one typo in the rx_rssi_and_proc_compens valuesLuciano Coelho
There was a typo in one of the values in the rx_rssi_and_proc_compens elemt of the Radio Parameters struct. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: implement dco itrim parameters settingLuciano Coelho
Newer firmwares require the dco itrim parameters to be set during initialization. This patch implements the new ACX function and calls it. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: use the correct macro when setting the basic ratesLuciano Coelho
We were using CONF_TX_RATE_MASK_ALL when calling wl1271_acx_rate_policies() during init. We should use WL1271_DEFAULT_BASIC_RATE_SET instead. The values are the same, but the latter is just the correct macro to use. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: set null data template when BSSID is knownLuciano Coelho
The call to wl1271_cmd_build_null_data() was missing when we got associated, this was causing PS to fail. This patch adds the call and now PS seems to work. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: check result code from the join commandLuciano Coelho
We were not checking the return value from the call to wl1271_cmd_join(). Added a check to make things more reliable. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: limit TX power to 25dBm for every channelLuciano Coelho
The wl1271 firmware supports maximun 25.5dBm, so the driver was returning -EINVALID to anything above that. This patch uses the channel max_power option to limit the TX power to 25dBm. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: remove workaround for disconnectionLuciano Coelho
Now we're using a the idle information coming from mac80211 to decide when to disconnect. If we have joined (ie. we're listening to a channel), whenever the interface goes to idle, we will issue a disconnect command. So the workaround to send a disconnect command before joining is not needed anymore. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: use join command with dummy BSSIDLuciano Coelho
When we need to change the channel before association, we have to send a join command with a valid BSSID. With this patch we use 0baddeadbeef as the BSSID. There are ongoing discussions with TI to get this done in a cleaner way. When we go back to idle, we issue a CMD_DISCONNECT to make sure the firmware stops listening to the channel and cleans things up internally. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: added radio parameters configuration values newer firmwaresLuciano Coelho
Add new radio parameters for new structures based on firmware revision 6.1.0.0.288. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: update radio and general parameters valuesLuciano Coelho
There were some changes in the values we have to use for these settings. This patches updates them. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: updated general parameters structure for newer firmwaresLuciano Coelho
In revision 6.1.0.0.288 the general parameters structure has changed. This patch updates the driver code accordingly. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: updated radio parameters structure for newer firmwaresLuciano Coelho
In revision 6.1.0.0.288 the radio parameters structure has changed. This patch updates the driver code accordingly. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1251: timeout one too soon in wl1251_boot_run_firmware()Roel Kluin
`loop' reaches INIT_LOOP + 1 after the loop. so if ACX_INTR_INIT_COMPLETE occurs in the last iteration the write occurs but also the error out as if a timeout occurred. This is probably very unlikely to ever occur. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271_cmd.c: cleanup char => u8Dan Carpenter
This is just a clean up and doesn't make a functional difference. It keeps the lint checkers happy. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville
2009-12-21wl1251: enable WMMKalle Valo
Everything is ready now and we can enable WMM in mac80211. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21wl1251: update tx_hdr when aliging skb in txKalle Valo
Before transmission when aligning the buffer to 4-byte bounday, tx_hdr needs to be updated. Otherwise debug logs print false data. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21wl1251: implement WMMKalle Valo
Now that necessary commands for WMM are implemented, implement queue handling for WMM. But WMM is not enabled yet, only one queue is used. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 14:40:59 +0000