aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2008-01-16rt2x00: Fix ieee80211 payload alignmentIvo van Doorn
As Johannes Berg indicated, the NET_IP_ALIGN doesn't need to be used for ieee80211 frames. This means we can simplify the alignment calculation to just use the result of the header size modulus 4 as frame alignment. Furthermore we shouldn't use NET_IP_ALIGN in rt2x00usb because it could be 0 on some architectures and we absolutely need to have 2 bytes reserved for possible aligning. Signed-off-by: Ivo van Doorn<IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-16b43: fix use-after-free rfkill bugStefano Brivio
Fix rfkill code which caused a use-after-free bug. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-16ipw2200: fix typo in kerneldocStefano Brivio
Fix a typo in kerneldoc for ipw2200. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-16wireless/libertas support for 88w8385 sdio older revisionMarc Pignat
Identifiaction of another revision of 88w8385 in sdio mode. Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-16hostap: section mismatch warningRandy Dunlap
Fix section mismatch by changing variable name to match one of the whitelisted (allowable) names for pointing into init data: WARNING: vmlinux.o(.data+0xce618): Section mismatch: reference to .init.data:prism2_plx_id_table (between 'prism2_plx_drv_id' and 'dev_info') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-12Merge branch 'fixes-jgarzik' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2008-01-10rt2x00: Put 802.11 data on 4 byte boundaryIvo van Doorn
Check the size of the ieee80211 header during rxdone and make sure the data behind the ieee80211 header is placed on a 4 byte boundary. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-10rt2x00: Corectly initialize rt2500usb MACIvo van Doorn
mac is a pointer, obviously we shouldn't use the address of a pointer as MAC address. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-10rt2x00: Allow rt61 to catch up after a missing tx reportMattias Nissler
Sometimes it happens in the tx path that an entry given to the hardware isn't reported in the txdone handler. This ultimately led to the dreaded "non-free entry in the non-full queue" message and the stopping of the tx queue. Work around this issue by allowing the driver to also clear out previos entries in the txdone handler. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-08b43: Fix rxheader channel parsingMichael Buesch
This patch fixes the parsing of the RX data header channel field. The current code parses the header incorrectly and passes a wrong channel number and frequency for each frame to mac80211. The FIXMEs added by this patch don't matter for now as the code where they live won't get executed anyway. They will be fixed later. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-22Merge branch 'fixes-jgarzik' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-12-19ipw2200: prevent alloc of unspecified size on stackReinette Chatre
if log_len is larger than 4K then we are killing the stack. allocate on heap instead and limit size to what practically can be used (PAGE_SIZE) Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-19iwlwifi: fix possible priv->mutex deadlock during suspendZhu Yi
This patch moves _cancel_deferred_work out of mutex protection and removes unnecessary mutex in pci_suspend and pci_resume. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-19p54: add Kconfig descriptionMichael Wu
Some people would like to know what p54 is. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-19rtl8187: Add USB ID for Sitecom WL-168 v1 001Matthias Mueller
Thanks to Matthias Mueller for reporting this device. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-17iwlwifi: fix rf_kill state inconsistent during suspend and resumeZhu Yi
The patch fixes the STATUS_RF_KILL_HW state is not cleared problem if the device goes to suspend when the rf_kill switch is enabled. The bug causes the driver always thinks the rf_kill switch is enabled (although it is disabled) after resume. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-17b43: Fix rfkill radio LEDLarry Finger
This fixes Bug #9414 Since addition of the rfkill callback, the LED associated with the off switch on the radio has not worked for several reasons: (1) Essential data in the rfkill structure were missing. (2) The rfkill structure was initialized after the LED initialization. (3) There was a minor memory leak if the radio LED structure was inited. Once the above problems were fixed, additional difficulties were noted: (4) The radio LED was in the wrong state at startup. (5) The radio switch had to be manipulated twice for each state change. (6) A circular mutex locking situation existed. (7) If rfkill-input is built as a module, it is not automatically loaded. This patch fixes all of the above. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-17bcm43xx_debugfs sscanf fixAndrew Morton
ia64: drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c: In function `tsf_write_file': drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:237: warning: long long int format, u64 arg (arg 3) drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:237: warning: long long int format, u64 arg (arg 3) We do not know what type was used to implement u64 and we can never use u64 in printk(), sscanf(), etc. Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-17libertas: select WIRELESS_EXTDan Williams
Ensure that libertas selects WIRELESS_EXT, since selecting other stuff that should depend on WEXT, like IEEE80211, doesn't seem to drag that in for us. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-17iwlwifi3945/4965: fix rate control algo reference leakCyrill Gorcunov
Fix rate control algo reference leak in case if network device has been failed to register. In this case special flag priv->mac80211_registered is not set and the rate algo reference is not freeing on module unload. That leads to OOPs in further ieee80211 rate register/unregister procedure (by any callee). It should fix the bug #9470 http://bugzilla.kernel.org/show_bug.cgi?id=9470 [akpm@linux-foundation.org: build fix] Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-17wireless/ipw2200.c: add __dev{init,exit} annotationsAdrian Bunk
This patch adds __dev{init,exit} annotations. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-17zd1211rw: Fix alignment problemsUlrich Kunitz
Shaddy Baddah found an alignment problem with zd1211rw driver at 2007-11-19. This patch fixes it, it is based on the patch proposed by Herbert Xu. The alignment 4 has been the agreed value on the linux-wireless mailing list. Notify that the problem does only affect the old zd1211rw softmac driver and not the zd1211rw-mac80211 driver. Daniel Drake has already provided a patch for the replacement of the softmac driver, which this patch will break. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-01Merge branch 'fixes-jgarzik' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-11-29iwlwifi 4965 Fix race conditional panic.Joonwoo Park
Signed-off-by: Joonwoo Park <joonwpark81@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29iwlwifi 3945 Fix race conditional panic.Joonwoo Park
Signed-off-by: Joonwoo Park <joonwpark81@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29iwlwifi: fix iwl_mac_add_interface handlerTomas Winkler
This patch fixes iwl_mac_add_interface. 1. Currently only one interface is supported, instead of silently retuning 0 now it returns -EOPNOTSUPP (By Johannes Berg) 2. It enables changing mac address from user space (By Ian Schram) Signed-off-by: Tomas Winkler <tomas@localhost.localdomain> Cc: Zhu Yi <yi.zhu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: linux-wireless <linux-wireless@vger.kernel.org Cc: Ian Schram <ischram@telenet.be> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29libertas: let more than one MAC event throughHolger Schurig
lbs_mac_event_disconnected() was called once and then never again upon a hardware MAC event. The reason was that the driver didn't clean the correct bit in the interrupt cause register of the chip. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29libertas: Don't set NETIF_F_IPV6_CSUM in dev->featuresDavid Woodhouse
I'm not sure why it was doing this, and I'm not sure I _want_ to know why. But calling it NETIF_F_DYNALLOC doesn't change the fact that the kernel believes it to be NETIF_F_IPV6_CSUM, and that IPv6 communication is hence buggered. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29drivers/net/wireless: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29b43/b43legacy: fix left-over URLs and ifdefsStefano Brivio
Fix some left-over URLs and ifdefs in b43 and b43legacy drivers. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29iwlwifi: fix possible NULL dereference in iwl_set_rate()Saleem Abdulrasool
Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-18rt2x00: Request usb_maxpacket() onceIvo van Doorn
The usb max packet size won't change during the device's presence. We should store it in a variable inside rt2x00dev and use that. This should also fix a division error when the device is being hot-unplugged while a frame is being send out. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-14Merge branch 'fixes-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2007-11-14iwl4965: fix not correctly dealing with hotunplugOliver Neukum
The interrupt handler returns IRQ_NONE if it detects that the device is gone. That's incorrect because the device may have raised the interrupt. Not acknowledging it may trigger the spurious interrupt detection and kill drivers sharing the interrupt line. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-14rt2x00: Fix chipset revision validationIvo van Doorn
The validation of the chipset revision was broken since for rt2500usb and rt73usb different registers should be read. When rt2500usb was loaded for a rt73 device it would false think the chipset was correct because the wrong register was read and validated. This has been fixed by expanding the check to also see if the first 4 bits of the revision is not-0 (When reading the wrong register offset the returned value is usually 0 which can be interpreted as invalid) Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-14iwl3945: place CCK rates in front of OFDM for supported ratesMohamed Abbas
The patch fixes association failure (reason = 18) bug by arranging CCK rates before OFDM rates. This patch will register with mac80211 the modified rate arrangement with CCK rate first. Change rate scale algorithm also to deal with rate change. Fix Txpower and rate Table commands to be constructed correctly after rearrangement. Signed-off-by: Mohamed Abbas <mabbas@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-13[IWLWIFI]: Not correctly dealing with hotunplug.Oliver Neukum
It makes no sense to enable interrupts if a device has been unplugged. In addition if in doubt IRQ_HANDLED should be returned. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-10iwlwifi: select proper rate control algorithmJohannes Berg
Prior to this patch, iwlwifi would always use the first registered rate control algorithm which, depending on system setup, could be anything. After the mac80211 patch to make the simple algorithm built-in, it would always be simple. This has always been a bug in iwlwifi. This fixes it by requesting that mac80211 selects the right rate control algorithm. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: Fix kconfig dependencies for rfkill and ledsMichael Buesch
Fix dependencies for built-in b43. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43legacy: Fix sparse warningMichael Buesch
Fix a sparse warning about a nonstatic function. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: properly request pcmcia IRQMichael Buesch
PCMCIA needs an additional step to request the IRQ. No need to add code to release the IRQ here, as that's done automatically in pcmcia_disable_device(). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43legacy: fix shared IRQ race conditionStefano Brivio
Fix an IRQ race condition in b43legacy. If we call b43legacy_wireless_core_stop(), it will set the status of the device to INITIALIZED and the IRQ handler won't care any longer about IRQs, thus the kernel will disable the IRQ if it's shared (unless we boot it with the 'irqpoll' option). So we must disable IRQs before changing the device status. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: fix shared IRQ race conditionStefano Brivio
Fix an IRQ race condition in b43. If we call b43_stop_wireless_core(), it will set the status of the device to INITIALIZED and the IRQ handler won't care any longer about IRQs, thus the kernel will disable the IRQ if it's shared (unless we boot it with the 'irqpoll' option). So we must disable IRQs before changing the device status. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43legacy: fix possible buffer overrun in debugfsStefano Brivio
Fix possible buffer overrun. The patch to b43 by Michael Buesch <mb@bu3sch.de> has been ported to b43legacy. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: Rewrite and fix rfkill initMichael Buesch
The rfkill subsystem doesn't like code like that rfkill_allocate(); rfkill_register(); rfkill_unregister(); rfkill_register(); /* <- This will crash */ This sequence happens with modprobe b43 ifconfig wlanX up ifconfig wlanX down ifconfig wlanX up Fix this by always re-allocating the rfkill stuff before register. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: debugfs SHM read buffer overrun fixMichael Buesch
Fix possible buffer overrun. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: Fix rfkill callback deadlockMichael Buesch
wl->mutex might already be locked on initialization. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: pcmcia-host initialization bugfixesMichael Buesch
Fix the initialization for PCMCIA devices. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10ipw2100: fix postfix decrement errorsRoel Kluin
If i reaches zero, the loop ends, but the postfix decrement subtracts it to -1. Testing for 'i == 0', later in the function, will not fulfill its purpose. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10hostap: fix section mismatch warningRandy Dunlap
Fix section mismatch warning: WARNING: vmlinux.o(.data+0x36fcc): Section mismatch: reference to .init.data:prism2_pci_id_table (between 'prism2_pci_drv_id' and 'prism2_pci_funcs') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-11 12:40:39 +0000